1. Introduction
This manual provides comprehensive instructions for the Anderic RRTX001R Remote Control, designed as a direct replacement for original A25-TX001-R and A25-TX005-R remote controls. It offers seamless integration and enhanced control over your compatible ceiling fan's speed and lighting functions.
The Anderic RRTX001R remote allows for effortless adjustment of fan speeds (HIGH, MEDIUM, LOW, and OFF) and provides versatile light control with both dimming and non-dimming capabilities. Its compact design ensures comfortable handling and convenient placement.
Image: Front and back view of the Anderic RRTX001R remote control, showcasing its buttons and battery compartment area.
2. Compatibility
Important Compatibility Warning: This remote control is specifically designed to operate only with A25-TX005-R and A25-TX001-R1 remotes. Verify the FCC ID number on the back of your original remote to ensure compatibility. Attempting to use this remote with other FCC ID numbers may result in non-functionality.
The Anderic RRTX001R is compatible with ceiling fan receivers such as AT-3DL, AT-3D, and others that utilize the specified remote models. It is designed to work with various Harbor Breeze Crosswinds, Camden, Mac II, and Mac III ceiling fan models.
Image: A visual representation highlighting the compatibility of the Anderic RRTX001R remote with various Harbor Breeze ceiling fan models, including Crosswinds, Camden, and Mac series.
3. Setup and Installation
3.1. Battery Installation
The Anderic RRTX001R remote control requires one 12-volt battery (sold separately) for operation. To install the battery:
- Locate the battery compartment cover on the back of the remote control.
- Slide or open the cover to access the compartment.
- Insert a new 12-volt battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
3.2. Pairing Instructions (3-Step Process)
To pair your Anderic RRTX001R remote control with your ceiling fan receiver, follow these steps:
- Step 1: Turn the power to your ceiling fan completely OFF using either the wall switch or the circuit breaker.
- Step 2: Restore power to the fan. Within 30 seconds of restoring power, proceed to the next step.
- Step 3: Press and hold the "LEARN" key located inside the battery compartment of the remote control. Hold the button until the fan responds (e.g., light blinks or fan turns on/off), indicating successful pairing.
Full instructions are provided with the remote control for detailed guidance.
Image: A diagram illustrating the battery compartment, the "LEARN" button, and the three-step pairing process for the remote control.
3.3. Wall Mount Installation
The package includes a convenient wall mount bracket and screws for easy storage and access to your remote control. To install the wall mount:
- Choose a suitable location on a wall, preferably near your fan's wall switch or bedside.
- Use the provided screws to secure the wall mount bracket to the wall.
- Slide the remote control into the mounted bracket for secure storage.
Image: The Anderic RRTX001R remote control shown securely placed in its included wall mount bracket, demonstrating how to keep it accessible.
4. Operating the Remote Control
The Anderic RRTX001R remote control provides intuitive buttons for managing your ceiling fan and light functions.
- Fan Speed Control: Buttons are provided for adjusting fan speeds to HIGH, MEDIUM, LOW, and OFF settings. Press the desired speed button to change the fan's rotation speed, or the OFF button to turn the fan off.
- Light Control: The remote features buttons for controlling the fan's light. This includes both ON/OFF functionality and dimming capabilities, allowing you to set the desired brightness level.
Image: An illustration of the remote control's buttons, clearly labeling controls for ceiling fan ON/OFF, three fan speeds, light ON/OFF, and dimming options.
5. Maintenance
5.1. Battery Replacement
When the remote control's performance degrades or it stops responding, it is likely time to replace the 12-volt battery. Follow the battery installation steps outlined in Section 3.1.
5.2. Cleaning
To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. Ensure no moisture enters the remote.
6. Troubleshooting
If you experience issues with your Anderic RRTX001R remote control, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead or low battery. | Replace the 12-volt battery (see Section 5.1). |
| Remote not controlling fan/light. | Remote not paired or pairing lost. | Re-pair the remote control with the fan receiver (see Section 3.2). |
| Intermittent control. | Weak battery or interference. | Replace battery. Ensure no strong electronic interference sources are nearby. |
| Light dimming not working. | Incompatible light bulbs or receiver setting. | Ensure dimmable bulbs are used. Consult your fan's receiver manual for light setting adjustments. |
7. Specifications
- Model Number: RRTX001R
- Compatible FCC IDs: A25-TX001-R1, A25-TX005-R
- Power Source: 1 x 12-volt battery (sold separately)
- Dimensions: Approximately 5.28 x 3.54 x 1.1 inches (Package Dimensions)
- Item Weight: 1.76 ounces
- Color: White
- Max Number of Supported Devices: 1
- Compatible Devices: Fan
Image: The remote control with approximate dimensions of 6 inches in length and 2 inches in width, highlighting its compact and comfortable design.
8. Warranty and Support
For warranty information or technical support regarding your Anderic RRTX001R Remote Control, please contact the manufacturer, ANDERIC. Refer to the product packaging or the official Anderic website for the most current contact details and warranty terms.
The product typically has a return policy of 30 days. For specific details on returns or replacements, please consult your purchase documentation or the retailer's policy.
