BOBLOV D7 2K Body Camera User Manual

4.1 Battery Installation

The BOBLOV D7 comes with two 1950mAh rechargeable batteries. One battery is typically pre-installed. To install or replace a battery:

1. Locate the battery compartment on the camera.
2. Open the battery compartment cover.
3. Insert the battery, ensuring the contacts align correctly.
4. Close the battery compartment cover securely.

Figure 3: The BOBLOV D7 Body Camera with its dual battery system.

4.2 Memory Card Installation

The D7 supports up to a 128GB Class 10 Micro SD card. Proper insertion is crucial for functionality.

1. Locate the card slot under the rubber cover on the side of the camera.
2. Ensure the wording on the Micro SD card faces the display screen of the camera.
3. Insert the card into the slot. You may need to use a fingernail or a small pin to gently press it in until you feel a spring inside and hear a click sound, indicating it is successfully locked into place.
4. Close the rubber cover to protect the slot from dust and moisture.
5. Power on the camera to verify the memory card capacity is recognized on the display.

Video 1: This video demonstrates the correct procedure for fully inserting the Micro SD card into the BOBLOV D7 body camera, including how to ensure it is properly seated and recognized by the device.

4.3 Charging the Camera

To charge your BOBLOV D7 Body Camera:

1. Place the camera onto the included charging dock. Ensure it is seated correctly.
2. Connect the USB cable to the charging dock and then to a power source (e.g., wall adapter, computer USB port, or car charger).
3. The charging indicator lights on the dock or camera will illuminate to show charging status.

5.1 Power On/Off

To power on the camera, press and hold the Power button until the BOBLOV logo appears on the screen. To power off, press and hold the Power button again until the device shuts down.

5.2 Video and Photo Capture

The D7 captures video at 1440P resolution and photos at 40MP. Refer to the on-screen interface for specific recording and photo modes.

Figure 4: The camera's high-resolution capture capabilities.

5.3 Night Vision

The camera features auto infrared night vision, enabling clear recording in low-light or complete darkness conditions. The infrared LEDs automatically activate when ambient light is insufficient.

Figure 5: Night vision capability of the BOBLOV D7.

5.4 GPS Tracking

With built-in GPS, the D7 records location data alongside your video footage. This feature is particularly useful for documenting routes and providing geographical context to your recordings.

Figure 6: GPS tracking functionality of the BOBLOV D7.

5.5 File Management

Recorded files can be accessed by connecting the camera to a computer via the USB cable. The camera's interface allows for reviewing and managing recordings. Specific functions like locking videos to prevent accidental deletion are available through the camera's menu.

5.6 Using as a Dash Cam

The BOBLOV D7 can also function as a dash cam, providing continuous recording while driving. Utilize the appropriate mounting accessories (sold separately or included depending on package) for secure placement in your vehicle.

6.1 Waterproof and Drop Protection

The D7 camera is rated IP68 waterproof, offering protection against dust and immersion in water up to 1.5 meters for 30 minutes. It is also designed to withstand drops from up to 2.5 meters. While durable, avoid intentional submersion or severe impacts to maintain optimal performance.

Figure 7: The BOBLOV D7's IP68 waterproof rating.

6.2 Cleaning

To clean the camera, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters ports or openings. Do not use harsh chemicals or abrasive cleaners.

Common Issues and Solutions

• Camera not turning on: Ensure the battery is fully charged and properly installed. Try using the second battery if available.
• Short battery life: Continuous recording, especially with IR night vision and GPS enabled, consumes more power. Ensure both batteries are fully charged before extended use. Consider reducing recording resolution or disabling non-essential features if longer battery life is needed.
• Memory card not recognized: Ensure the Micro SD card is correctly inserted and fully clicked into place. Verify the card is a Class 10 Micro SD card and not larger than 128GB. Try reformatting the card (this will erase all data).
• Poor video/photo quality: Ensure the lens is clean and free from smudges. Check the recording resolution settings in the camera menu.
• No night vision: Ensure the auto infrared feature is enabled in the settings, or manually activate it if available.

If you encounter issues not listed here or require further assistance, please refer to the contact information in the Warranty and Support section.