Ymiko 2.8L Automatic Cat Water Dispenser User Manual

Introduction

Thank you for choosing the Ymiko 2.8L Automatic Cat Water Dispenser. This gravity-fed pet waterer is designed to provide a continuous supply of fresh water for your cats and dogs, ensuring they stay hydrated with minimal effort from your side. Its durable plastic construction and simple design make it a reliable and easy-to-maintain solution for pet hydration.

Product Features

• Sturdy and Safe Material: Constructed from strong, pet-safe plastic, ensuring durability and the well-being of your pets.
• Large 2.8L Capacity: Provides a substantial water supply, reducing the frequency of refills and ensuring continuous hydration.
• Gravity Feed System: Automatically dispenses water as needed, maintaining a consistent water level in the bowl.
• Suitable for Dogs and Cats: Designed for use by both canine and feline companions.
• Portable and Lightweight: Its compact size and light weight make it easy to move and store, suitable for various indoor and outdoor settings.
• Easy to Use and Clean: Simple operation and straightforward cleaning process for convenience.

Setup Instructions

1. Unpack the Dispenser: Carefully remove all components from the packaging. Ensure all parts, including the water reservoir, base, and filter (if included separately), are present and undamaged.
2. Fill the Reservoir: Invert the water reservoir and unscrew the cap. Fill the reservoir with clean, fresh water.
3. Attach the Reservoir to the Base: Securely screw the filled reservoir onto the base of the dispenser. Ensure it is tightly sealed to prevent leaks.
4. Position the Dispenser: Place the assembled water dispenser on a flat, stable surface in a location accessible to your pet. The gravity system will automatically begin to fill the water bowl as the reservoir is inverted.

Image: The Ymiko 2.8L Automatic Cat Water Dispenser in its assembled state, showcasing its snail-like design and blue color.

Operating Instructions

The Ymiko Automatic Cat Water Dispenser operates on a simple gravity-feed principle. Once the water reservoir is filled and securely attached to the base, water will flow into the drinking bowl until a certain level is reached. As your pet drinks, the water level in the bowl will drop, and the gravity system will automatically replenish it from the reservoir, ensuring a continuous supply of fresh water.

Image: A cat drinking from the dispenser, demonstrating how the automatic water feeding system works using hydraulic pressure from height difference.

Image: A small dog using the Ymiko 2.8L Automatic Cat Water Dispenser, emphasizing its large 2.8L capacity suitable for both dogs and cats.

Maintenance and Cleaning

Regular cleaning of your Ymiko water dispenser is essential to ensure your pet always has access to clean and fresh water. It is recommended to clean the dispenser at least once a week, or more frequently if needed.

1. Disassemble: Separate the water reservoir from the base.
2. Empty Water: Discard any remaining water from both the reservoir and the drinking bowl.
3. Clean Components: Wash all parts (reservoir, base, and any filter components) with warm, soapy water. Use a soft brush or sponge to remove any slime or debris.
4. Rinse Thoroughly: Rinse all components thoroughly with clean water to remove any soap residue.
5. Dry: Allow all parts to air dry completely or dry with a clean cloth before reassembling.
6. Reassemble: Reassemble the dispenser and refill with fresh water as per the Setup Instructions.

Image: The Ymiko water dispenser shown with a separate filter, illustrating the components that require regular cleaning and maintenance.

Troubleshooting

• Water Not Dispensing:
  • Ensure the reservoir cap is securely screwed on and properly aligned with the base.
  • Check if the reservoir is empty and needs refilling.
  • Inspect the opening where water flows into the bowl for any blockages or debris.
• Leaking:
  • Verify that the reservoir is correctly and tightly screwed onto the base.
  • Check for any cracks or damage to the reservoir or base.
• Water Appears Dirty/Slimey:
  • Increase the frequency of cleaning the dispenser.
  • Ensure you are using fresh, clean water for refills.

Specifications

Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact Ymiko customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may visit the official Ymiko store on Amazon: Ymiko Store