Introduction
The OLIGHT Baton4 is a compact and powerful Everyday Carry (EDC) flashlight designed for various applications, from daily tasks to outdoor adventures and emergency situations. It features high brightness, multiple lighting modes, and convenient magnetic charging.

Product Overview
Key Features
Creative Design:
The flashlight body features a unique design with lines and dots, crafted using CNC technology, imitating aircraft steel plates and rivets.Powerful Illumination:
Delivers a maximum output of 1,300 lumens with a beam distance of up to 170 meters, suitable for various lighting needs.Adjustable Modes:
Offers six lighting modes: Moonlight (0.5 lumens), Low (12 lumens), Medium (60 lumens), High (600 lumens), Turbo (1300 lumens), and Strobe (1300 lumens at 13Hz) for versatile use.Magnetic Charging:
Equipped with a flat magnetic tail cap for stable standing and attachment to metal surfaces, facilitating hands-free operation and easy magnetic charging.Intuitive Indicators:
Features indicators for both brightness level and battery life, providing clear status updates.Lightweight and Portable:
Weighs only 1.85oz (52.5g) and measures 2.48 inches (63mm) in length, making it highly portable for everyday carry.Durable Construction:
Built with a Type-III hard anodized aluminum body and an upgraded stainless steel switch for enhanced durability.




Setup
Initial Setup and Charging
Before first use, fully charge your OLIGHT Baton4 flashlight.
- Connect the magnetic charging cable (MCC) to a USB power source.
- Attach the magnetic end of the cable to the tail cap of the flashlight. The indicator on the cable will turn red during charging and green when fully charged.
- Ensure the flashlight is clean and dry before charging to prevent damage.

Operating Instructions
Basic Operation
Turning On/Off
Turn On:
Single click the side switch to turn the flashlight on. It will turn on in the previously used mode (except Moonlight, Turbo, or Strobe).Turn Off:
Single click the side switch again to turn the flashlight off.
Changing Brightness Levels
- When the flashlight is on, press and hold the side switch to cycle through Low, Medium, and High modes. Release the switch to select the desired mode.
Moonlight Mode:
When the flashlight is off, press and hold the side switch for approximately one second to activate Moonlight mode.Turbo Mode:
Double-click the side switch to activate Turbo mode. Double-click again to return to the previous mode.Strobe Mode:
Triple-click the side switch to activate Strobe mode. Single click to exit Strobe mode.

Lockout/Unlock
Lockout:
When the flashlight is off, press and hold the side switch for two seconds. The Moonlight mode will first turn on and then turn off, indicating the flashlight is locked out.Unlock:
When in lockout mode, press and hold the side switch for one second. The Moonlight mode will turn on, indicating the flashlight is unlocked.
Battery and Brightness Indicators
The indicators provide real-time information:
Battery Level:
- Green: Battery >= 60%
- Orange: Battery 10% - 60%
- Red: Battery < 10%
Brightness Level:
The indicator light will correspond to the current brightness mode.
Maintenance
Care and Maintenance
To ensure optimal performance and longevity of your OLIGHT Baton4, follow these maintenance guidelines:
- Keep the magnetic charging port clean and free of debris.
- Regularly clean the threads and O-rings with a clean cloth. Apply a thin layer of silicone grease to the O-rings if necessary to maintain waterproof sealing.
- Store the flashlight in a cool, dry place when not in use for extended periods.
- Avoid disassembling the flashlight head, as this may damage the light and void the warranty.

Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on | Low battery | Recharge the battery. |
| Flashlight does not turn on | Lockout mode activated | Unlock the flashlight by pressing and holding the side switch for one second. |
| Intermittent light | Loose tail cap | Tighten the tail cap securely. |
| Intermittent light | Dirty contacts | Clean the contact points on the flashlight and battery with an alcohol swab. |
| Reduced brightness or short runtime | Battery degradation | Fully charge the battery. If the issue persists, consider replacing the battery. |
| Magnetic charging not working | Dirty magnetic contacts | Clean the magnetic contacts on both the cable and the flashlight. |
If the issue persists after attempting these solutions, please contact OLIGHT customer support for further assistance.
Specifications
Product Specifications
| Feature | Detail |
|---|---|
| Brand | OLIGHT |
| Model | BATON4-ZJ#300000 |
| Color | Fighter Pilot |
| Material | Aluminum |
| Light Source Type | LED |
| Power Source | Battery Powered |
| Max Output | 1300 Lumens |
| Max Throw | 170 Meters |
| Max Runtime | 30 Days (Moonlight mode) |
| Water Resistance | IPX8 Waterproof |
| Item Weight | 4.6 ounces (1.85oz / 52.5g for flashlight only) |
| Product Dimensions | 1.45"D x 1.98"W x 5.82"H (Overall package) / 2.48in (63mm) Length |
| Battery Cell Composition | Lithium Ion |
What's in the Box
Package Contents
Your OLIGHT Baton4 package includes the following items:
- Battery
- Belt Clip
- Case
- Charging Cable

Warranty and Support
Warranty Information
The OLIGHT Baton4 comes with a Lifetime Warranty from the manufacturer, OLIGHT. This warranty covers defects in materials and workmanship under normal use.
Customer Support
For technical assistance, warranty claims, or any other inquiries, please contact the seller, Olight® Direct, or visit the official OLIGHT website.
You can also refer to the official user manual PDF for more detailed information: Download User Manual (PDF)

