GRAFJALLET Side Table Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your GRAFJALLET Side Table. Please read this manual carefully before beginning assembly and retain it for future reference.

The GRAFJALLET Side Table features a bold, industrial-inspired design with robust metal construction and functional details. It is designed for indoor use.

Safety Information

• Always follow assembly instructions carefully to ensure stability and safety.
• Do not overload the table.
• Keep small parts away from children during assembly to prevent choking hazards.
• Ensure all fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
• This product is intended for indoor use only.

Package Contents

Verify that all components are present before starting assembly. The package contains one unit of the GRAFJALLET Side Table.

• Top panel (Particleboard, Paper foil, Plastic edging)
• Frame components (Steel, Epoxy/polyester powder coating)
• Side panels (Steel, Epoxy/polyester powder coating)
• Shelf (Steel, Epoxy/polyester powder coating)
• Bottom panel (Steel, Epoxy/polyester powder coating)
• Door (Steel, Epoxy/polyester powder coating)
• Adjustable feet
• All necessary fasteners and fittings

Package dimensions: Width: 42 cm, Height: 8 cm, Length: 60 cm. Total weight: 8.52 kg.

Setup and Assembly

Assembly is required for this product. Please follow the visual instructions provided with your product packaging for detailed step-by-step guidance. Below are general tips:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Match each component with the parts list in your product's assembly diagram.
3. Assemble Frame: Begin by assembling the main frame structure using the provided fasteners. Ensure all connections are snug but do not overtighten until the entire frame is assembled.
4. Install Panels and Shelf: Attach the side panels, bottom panel, and shelf to the frame as indicated in the assembly guide.
5. Attach Door: The door can be mounted to open either to the right or to the left. Choose your preferred orientation and attach the door using the hinges and handle provided.
6. Attach Top Panel: Secure the top panel to the assembled structure.
7. Adjust Feet: Screw in the adjustable feet to the bottom of the table legs. These feet allow you to level the table on uneven surfaces.
8. Final Tightening: Once all parts are in place, go back and securely tighten all fasteners.

Image: Fully assembled GRAFJALLET Side Table. This image illustrates the final appearance of the product after successful assembly.

Operating Instructions

The GRAFJALLET Side Table is designed for straightforward use.

• Adjusting Height: The table is equipped with adjustable feet. To level the table or slightly adjust its height, rotate the feet clockwise or counter-clockwise until the desired stability and height are achieved.
• Door Functionality: The cabinet door can be opened by pulling the handle. Ensure the door closes completely to keep contents secure and dust-free.
• Storage: Utilize the open shelf and the enclosed cabinet for storing various items.

Maintenance

Proper care will help maintain the appearance and longevity of your side table.

• Cleaning: Wipe the table clean with a cloth dampened with a mild detergent.
• Drying: Always wipe dry with a clean, dry cloth immediately after cleaning to prevent water spots or damage.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, strong solvents, or harsh chemicals as they may damage the finish.
• Regular Checks: Periodically check all screws and fittings to ensure they remain tight. Re-tighten if necessary.

Troubleshooting

If you encounter any issues with your GRAFJALLET Side Table, consider the following common solutions:

• Table Wobbles: Check if the adjustable feet are properly leveled. Rotate them to find a stable position. Ensure all assembly screws are tightened.
• Door Misalignment: If the door does not close properly or appears misaligned, check the hinge connections. You may need to slightly adjust the hinges or re-tighten their screws.
• Missing Parts: If any parts were missing upon unboxing, please contact the retailer or manufacturer's customer service with your product model number and a description of the missing part.

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your purchase or visit the official Ikea website. You may also contact the retailer from whom you purchased the product.

When contacting support, please have your model number (405.702.20) and proof of purchase readily available.