1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Jandy Aqualink RS Upgrade Kit with RS-PS8 IQ30-RS. This kit is designed to enhance your existing pool or spa automation system by integrating the latest Aqualink RS technology, offering advanced control and monitoring capabilities.
The RS-PS8 IQ30-RS module serves as the central component, enabling seamless management of various pool and spa functions, including pumps, heaters, and lighting, through an intuitive interface. Please read this manual thoroughly before proceeding with installation or operation to ensure proper functionality and safety.
2. Safety Information
WARNING: Risk of Electric Shock or Electrocution.
- Always disconnect power to the pool/spa control system at the circuit breaker before performing any service or installation. Failure to do so can result in serious injury or death.
- Installation and servicing must be performed by a qualified professional in accordance with all local and national electrical codes.
- Do not operate the system if any components are damaged or if water is present in the control panel.
- Keep all electrical connections dry and secure.
- This product is intended for use with pool and spa equipment only. Do not use for other applications.
3. Package Contents
Verify that all components listed below are present and undamaged before beginning installation:
- Jandy Aqualink RS-PS8 Control Board
- IQ30-RS Wi-Fi Antenna/Module
- Connecting Cables
- Labels for System Identification
- Installation Guide (this manual)
Image: Contents of the Jandy Aqualink RS Upgrade Kit, showing the main control board, the IQ30-RS Wi-Fi module with its antenna, connecting cables, and a sheet of identification labels.
4. Setup and Installation
4.1 Pre-Installation Checklist
- Ensure the existing pool/spa control system is compatible with the Aqualink RS upgrade.
- Verify that the power to the existing system is completely disconnected at the main circuit breaker.
- Have necessary tools available (screwdrivers, wire strippers, multimeter).
- Ensure a stable Wi-Fi network is available within range of the installation location for the IQ30-RS module.
4.2 Installation Steps
- Power Disconnection: Turn off all power to the pool/spa control system at the main circuit breaker. Confirm power is off using a voltage tester.
- Access Control Panel: Open the existing Aqualink control panel enclosure.
- Remove Old Board (if applicable): Carefully disconnect and remove the existing control board, noting all wiring connections for reference.
- Install New RS-PS8 Board: Mount the new RS-PS8 control board into the designated slot within the enclosure.
- Connect Wiring: Reconnect all necessary wiring to the new RS-PS8 board, ensuring correct terminal connections as per the wiring diagram (refer to the detailed wiring diagram provided with your specific Aqualink system).
- Install IQ30-RS Module: Connect the IQ30-RS Wi-Fi module to the RS-PS8 board using the provided cable. Position the module for optimal Wi-Fi signal reception.
- Secure Enclosure: Close and secure the control panel enclosure.
- Restore Power: Turn on power to the system at the main circuit breaker.
- Initial Configuration: Follow the on-screen prompts or app instructions to complete the initial setup and Wi-Fi network connection for the IQ30-RS module.
Image: The Jandy Aqualink RS-PS8 control board and IQ30-RS Wi-Fi module, alongside a smartphone demonstrating the mobile application for system control.
5. Operating Instructions
The Jandy Aqualink RS system, once upgraded with the IQ30-RS, can be controlled via the Aqualink mobile application or compatible wall-mounted interfaces.
5.1 Mobile App Control
- Download the official Jandy Aqualink app from your device's app store.
- Launch the app and follow the prompts to connect to your IQ30-RS module. This typically involves creating an account and linking your system.
- Once connected, you can:
- Turn pool/spa pumps ON/OFF and adjust speeds.
- Control heaters and set desired temperatures.
- Manage pool/spa lighting and other auxiliary equipment.
- Create and modify schedules for automated operation.
- Monitor system status and receive alerts.
5.2 Manual Control (if applicable)
For systems with a physical control panel, refer to your original Aqualink system manual for direct control options. The upgrade kit primarily enhances remote and smart control capabilities.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Jandy Aqualink RS system.
- Visual Inspection: Periodically inspect the control board and wiring for any signs of wear, corrosion, or damage. Ensure all connections are secure.
- Cleanliness: Keep the control panel enclosure clean and free from dust, debris, and moisture. Use a dry, soft cloth for cleaning.
- Firmware Updates: Regularly check for and install firmware updates for the IQ30-RS module via the Aqualink app. Updates often include performance improvements and new features.
- Wi-Fi Signal: Ensure the IQ30-RS module maintains a strong Wi-Fi signal. Relocate or consider a Wi-Fi extender if signal strength is consistently low.
7. Troubleshooting
This section addresses common issues you might encounter with your Jandy Aqualink RS Upgrade Kit.
| Problem | Possible Cause | Solution |
|---|---|---|
| System not responding via app. | No Wi-Fi connection; IQ30-RS module offline; app not synced. | Check Wi-Fi router and signal strength. Restart IQ30-RS module (power cycle). Ensure app is updated and logged in correctly. |
| Equipment (pump, heater) not turning on. | Incorrect wiring; circuit breaker tripped; equipment fault. | Verify all wiring connections. Check circuit breakers. Consult a qualified technician if equipment remains unresponsive. |
| IQ30-RS module status light is off or blinking erratically. | No power; module fault; Wi-Fi connection issue. | Ensure module is properly connected and receiving power. Refer to the IQ30-RS specific guide for light codes. Re-establish Wi-Fi connection. |
If you encounter issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Jandy customer support or a certified pool professional.
8. Specifications
- Model Number: RS-PS8 IQ30-RS
- Product Dimensions: 5.8 x 5.8 x 4.5 inches
- Item Weight: 2 pounds
- Manufacturer: Jandy
- Country of Origin: USA
9. Warranty and Support
This Jandy product is manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Jandy website. Warranty terms may vary based on region and purchase location.
For technical support, installation assistance, or warranty claims, please contact Jandy customer service directly. Ensure you have your product model number and purchase details available when contacting support.
Note: Products purchased from unauthorized resellers may not be covered under the manufacturer's warranty.
