Cenfmltd Solar Flood Street Lights (Model BYE-200W) Instruction Manual

1. Important Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Ensure the solar panel receives direct sunlight for optimal charging.
• Do not disassemble, repair, or modify the product. This may cause damage or injury.
• Keep the product away from fire or high temperatures.
• Dispose of batteries according to local regulations.
• Avoid direct eye exposure to the LED light.

2. Package Contents

Verify that all components are present in your package:

• Lamp Body (x1)
• Lamp Arm (x1)
• Bolt Driver (x1)
• Remote Control (x1)
• Fixing Screws (x1 set)
• Wall Screws (x2)
• Expansion Screws (x2)
• Instructions Manual (x1)

Image: Contents of the Cenfmltd Solar Flood Street Light package.

3. Product Overview

The Cenfmltd Solar Flood Street Light is designed for outdoor security and illumination, featuring a solar-powered system, motion sensor, and remote control for convenient operation.

Image: Front and back view of the solar light, detailing its components.

Key Components:

• Polycrystalline Silicon Solar Panels: Efficiently convert sunlight into electricity.
• High Brightness LED Beads: Provide powerful 6500K daylight illumination.
• Motion Sensor: Detects movement to activate full brightness.
• Durable ABS Shell: Ensures IP65 waterproof, rust, and lightning resistance.
• On/Off Switch: Manual control for the light.
• Remote Control: Adjusts brightness, sets timers, and controls modes.

4. Setup and Installation

Follow these steps for proper installation to ensure optimal performance:

1. Choose a Location: Select a mounting location where the solar panel will receive direct sunlight for 5-6 hours daily. Avoid areas with obstructions like trees or eaves that could block sunlight.
2. Recommended Mounting Height: Install the light at a height of 4-13 feet (1.2-4 meters) for effective lighting coverage of 160-430 square feet.
3. Mount the Lamp Arm: Attach the lamp arm to the desired surface (wall, pole, etc.) using the provided screws and expansion screws.
4. Attach the Lamp Body: Securely connect the lamp body to the mounted arm.
5. Activate the Light: Before first use, ensure the light is switched ON using the button on the lamp body or the remote control.

Image: Important tip for selecting an unobstructed installation location for the solar panel.

Image: Recommended mounting height and lighting coverage area.

5. Operating Instructions

The solar light features intelligent light sensing and motion detection, controllable via the included remote.

Automatic Operation (Dusk to Dawn):

The light automatically turns on at dusk and off at dawn, provided it has sufficient charge.

Image: Solar light charging during the day and illuminating at night.

Motion Sensor Mode:

In motion sensor mode, the light maintains 30% brightness. When motion is detected, it increases to 100% brightness for 20 seconds, then returns to 30% if no further motion is detected.

Remote Control Functions:

• ON/OFF: Power the light on or off.
• Brightness Adjustment: Select brightness levels: 25%, 50%, 75%, or 100%.
• Timer Settings: Set the light to operate for 2, 3, 5, 6, or 8 hours.
• Motion Sensor Activation: Enable or disable the motion sensor function.

6. Maintenance

To ensure the longevity and optimal performance of your solar light, follow these maintenance guidelines:

• Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
• Battery Performance: The integrated lithium polymer battery is designed for durability. Ensure the light receives adequate sunlight for consistent charging.
• Weather Resistance: The light features an IP65 waterproof rating and is designed to withstand various outdoor conditions, including rust and lightning. It operates normally in temperatures ranging from 14°F to 140°F (-10°C to 60°C).

Image: Durability features including IP65 waterproof, high-heat proof, and snow resistance.

7. Troubleshooting

If you encounter issues with your solar light, refer to the following common problems and solutions:

• Light does not turn on at night:
  • Ensure the ON/OFF switch on the lamp body is in the 'ON' position.
  • Verify the solar panel is receiving direct sunlight for at least 5-6 hours daily. Relocate if necessary.
  • Check for any obstructions blocking the solar panel.
  • The battery might be depleted. Allow several days of full sunlight charging.
• Light is dim or does not stay on long:
  • The solar panel may not be getting enough sunlight. Clean the panel and ensure optimal placement.
  • Weather conditions (overcast days) can reduce charging efficiency.
  • Ensure the remote control settings are not set to a low brightness percentage or a short timer.
• Motion sensor is not working:
  • Confirm the motion sensor mode is activated via the remote control.
  • Ensure there are no obstructions directly in front of the sensor.
  • Test the sensor by moving within its detection range.

8. Specifications

9. Warranty and Support

Cenfmltd offers a 2-year after-sale service for this product. If you have any questions, concerns, or require assistance, please do not hesitate to contact our customer service team.

Our customer service team is available 7 days a week, 24 hours a day, to provide support and solutions.

For warranty claims or technical support, please refer to the contact information provided on your purchase receipt or the official Cenfmltd website.

Image: Examples of suitable installation locations for the solar lights.