Spider Farmer GGS Controller Kits User Manual

1. Setup Guide

1.1 Package Contents

Your Spider Farmer GGS Controller Kits package includes the following items:

• 1X GGS Controller
• 1X Controller Power Adapter
• 1X Controller Mounting Rail
• 1X GGS Temp Humid Light Sensor
• 1X GGS Light & Fan Adapter
• 2X RJ12 Phone Line Splitter
• 6X 98in 6 Pin RJ12 Cable
• 1X 10in 6 Pin RJ12 Cable
• 4X Hook and Loop
• 1X User Manual

1.2 Physical Installation

Follow these steps to physically install your GGS Controller and its components:

1. Mount the GGS Controller: Use the included mounting rail to secure the controller in a convenient location within your grow environment. Ensure it is easily accessible and protected from moisture.
2. Connect the GGS Temp Humid Light Sensor: Plug the GGS Temp Humid Light Sensor into the designated port on the controller. Position the sensor to accurately monitor temperature, humidity, and light cycles within your grow tent. Ensure the day/night light sensor on the side is unobstructed for accurate readings.
3. Connect the GGS Light & Fan Adapter: This 2-in-1 adapter allows control of 0-10V lights and PWM clip fans. Connect it to the controller using an RJ12 cable.
4. Connect Grow Lights: The controller is compatible with Spider Farmer SF Series (excluding SF1000D, SF300, SF600), G Series, and SE Series grow lights. Connect your compatible grow lights to the controller or the Light & Fan Adapter using the provided RJ12 cables.
5. Connect Fans: Connect your clip fans and inline fans with RJ12 connectors directly to the controller or the Light & Fan Adapter. For non-RJ12 fans, humidifiers, dehumidifiers, and other devices, use GGS AC5/AC10 smart power strips (sold separately) to manage them.

Figure 1: Overview of the Spider Farmer GGS Controller Kits with connected components and mobile app.

Figure 2: The GGS Light & Fan Adapter, enabling control for compatible lights and fans.

1.3 App Setup and Connectivity

The GGS Controller supports Bluetooth and Wi-Fi remote control via the Spider Farmer App. Download the app from your device's app store and follow the on-screen instructions to pair your controller. The app allows for customizable grow plans and comprehensive control.

Figure 3: The Spider Farmer App's planting plan interface, allowing users to schedule grow cycles.

Figure 4: The Spider Farmer App's control screen, providing access to light and other device settings.

2. Operating Instructions

2.1 Controller Interface Overview

The GGS Controller features a user-friendly interface with a central rotary knob and a display screen. The knob allows for easy navigation through menus and adjustment of settings. The screen displays real-time environmental data and control options.

Figure 5: The GGS Controller's main interface, highlighting the rotary knob for intuitive control.

2.2 Light Control

The controller offers comprehensive control over your grow lights:

• On/Off Times: Set precise start and end times for your grow lights.
• Brightness Adjustment: Manually adjust the brightness level of your lights from 0% to 100%.
• Sunrise/Sunset Simulation: Program gradual dimming up and down effects to simulate natural sunrise and sunset, promoting healthier plant growth. For example, set a 10-minute sunrise/sunset to gradually increase/decrease brightness over that period.
• Dynamic PPFD Control: The app supports dynamic PPFD control, allowing you to set specific light intensity targets for different growth stages. This feature requires the SensorPro (sold separately).

Figure 6: Light setting options within the Spider Farmer App, including brightness and sunrise/sunset simulation.

2.3 Fan Control

Manage your grow tent's airflow with precision:

• Speed Control: Adjust the operation speed of your inline and clip fans.
• Oscillation: For compatible clip fans, control oscillation settings.
• Natural Wind Modes: Simulate natural wind patterns by programming the fan to gradually increase and decrease speed.
• Timing: Set specific run times for fans to automate ventilation.
• Standby Speed: For inline fans, set a standby speed for continuous low-level operation after a set duration.

Figure 7: The GGS Controller managing a smart growing ecosystem, including lights, fans, and other devices.

2.4 Environmental Monitoring

The GGS Controller, with its integrated sensor, provides crucial environmental data:

• Temperature and Humidity: Real-time monitoring of air temperature and humidity within your grow space.
• Day/Night Detection: The built-in light sensor detects day and night cycles to automate light and fan schedules.
• Advanced Sensors (Optional): CO2 and PPFD sensors are not included with the GGS controller. For these readings, please purchase the SensorPro separately. If using SensorPro, disconnect the original sensor for proper data collection. Soil data is not supported unless used with AC5/AC10 smart power strips.

Figure 8: The GGS Temp Humid Light Sensor, providing essential environmental data for the controller.

2.5 Custom Grow Schedules

The Spider Farmer App allows you to create and implement custom grow schedules, automating lighting, fans, and climate control throughout each growth stage. This feature provides precise control for optimizing your grow cycle.

Figure 9: Remote control of light settings via the Spider Farmer App, enabling management from anywhere.

3. Maintenance

Regular maintenance ensures the longevity and accuracy of your GGS Controller Kits:

• Sensor Cleaning: Periodically clean the GGS Temp Humid Light Sensor to ensure accurate readings. Use a soft, dry cloth to gently wipe the sensor surface.
• Firmware Updates: Check the Spider Farmer App regularly for firmware updates. Updates can be performed via SD card or over the network, improving performance and adding new features.
• Sensor Calibration: If you suspect inaccurate readings, refer to the app or controller settings for sensor calibration options.

4. Troubleshooting

If you encounter issues with your GGS Controller Kits, consider the following common solutions:

• Connectivity Issues: Ensure the controller is powered on and within range of your Wi-Fi network or Bluetooth device. Restart the controller and your mobile device if connection problems persist.
• Inaccurate Sensor Readings: Verify that the GGS Temp Humid Light Sensor is clean and unobstructed. If using SensorPro, ensure the original sensor is disconnected to avoid interference.
• Device Not Responding: Check all RJ12 cable connections to ensure they are secure. Confirm that connected devices are compatible with the GGS Controller.
• App Functionality: Ensure your Spider Farmer App is updated to the latest version.

For further assistance, please refer to the detailed user manual included with your product or contact Spider Farmer customer support at support@spider-farmer.com.

5. Specifications

6. Warranty and Support

The Spider Farmer GGS Controller Kits come with 2 Years Support Services. For any product-related inquiries, technical support, or warranty claims, please contact Spider Farmer customer service directly. You can reach them via email at support@spider-farmer.com.