Stauer Square Skeleton Automatic Watch User Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Stauer Square Skeleton Automatic Watch. Please read this manual thoroughly before using your watch to ensure optimal performance and longevity.

Image: Front view of the Stauer Square Skeleton Automatic Watch. This image highlights the unique square cushion case, the black open heart dial, and the black leather strap. The intricate mechanical movement is visible through the dial.

Setup and Initial Winding

Your Stauer automatic watch is powered by a 21-jewel mechanical movement that winds itself with the natural motion of your wrist. However, for initial setup or after a period of inactivity, manual winding may be required.

1. Unpack the Watch: Carefully remove the watch from its packaging.
2. Locate the Crown: The crown is the small knob on the side of the watch case, typically on the right side.
3. Manual Winding:
   • Ensure the crown is pushed all the way in (position 0).
   • Turn the crown clockwise approximately 20-30 times. This will provide enough power reserve to start the watch.
   • The second hand should begin to move smoothly.
4. Setting the Time:
   • Pull the crown out to position 1 (first click).
   • Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
   • Once the time is set, push the crown back into position 0.
5. Wearing the Watch: Fasten the genuine black leather strap comfortably on your wrist. Regular wear will keep the watch wound.

Image: Side view of the Stauer Square Skeleton Automatic Watch, illustrating the position of the crown for winding and time setting.

Operating the Automatic Movement

The Stauer Square Skeleton Automatic Watch features a self-winding mechanical movement. This means it does not require a battery and is powered by the motion of your arm.

• Power Reserve: When fully wound, the watch typically has a power reserve of approximately 36-40 hours. If the watch is not worn for an extended period, it will stop.
• Restarting: To restart a stopped watch, either manually wind it as described in the "Setup" section or wear it for several hours. The natural motion of your wrist will wind the mainspring.
• Open Heart Dial: The transparent open heart dial allows you to observe the intricate gears and balance wheel of the 21-jewel movement in operation.

Image: Rear view of the Stauer Square Skeleton Automatic Watch, showcasing the transparent case back which reveals the 21-jewel automatic movement. This view emphasizes the self-winding mechanism.

Maintenance and Care

Proper care will ensure the longevity and accurate performance of your Stauer watch.

• Cleaning: Wipe the watch case and crystal with a soft, dry, lint-free cloth. For the leather strap, use a slightly damp cloth and allow it to air dry. Avoid harsh chemicals.
• Water Resistance: This watch is water-resistant up to 3 ATM (30 meters/100 feet). This means it is suitable for splashes or brief immersion in water, such as rain or hand washing. It is not suitable for swimming, showering, or diving. Always ensure the crown is fully pushed in before any contact with water.
• Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes, as this can affect the movement's accuracy and seals.
• Magnetic Fields: Keep the watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices), as magnetism can affect the accuracy of mechanical movements.
• Storage: When not wearing the watch for extended periods, store it in a cool, dry place, preferably in its original box or a watch box.
• Professional Servicing: Mechanical watches benefit from periodic professional servicing (typically every 3-5 years) to clean, lubricate, and adjust the movement.

Image: Front view of the watch with key features highlighted, including its dimensions (44mm diameter, 21mm band), stainless steel construction, and 3 ATM water resistance rating. This visual aid helps in understanding the watch's physical attributes and limitations.

Troubleshooting

If you encounter issues with your Stauer watch, please refer to the following common problems and solutions:

Specifications

Image: Detailed rear view of the watch, highlighting the stainless steel back, the perforated black leather band, and confirming the 21-jewel automatic movement that requires no battery.

Warranty and Support

For warranty information or technical support regarding your Stauer Square Skeleton Automatic Watch, please contact Stauer customer service directly.

• Manufacturer: Stauer
• Website: www.stauer.com (Please refer to the official Stauer website for the most current contact and warranty details.)
• Customer Service: Refer to the contact information provided with your purchase or on the official Stauer website.