1. Introduction
Thank you for choosing the Vulpes Goods Electric Hot Water Bottle. This device is designed to provide soothing warmth and comfort, offering relief from muscle pain, joint stiffness, and general cold. It features a rechargeable, wireless design for convenient use and includes an additional hand warmer for enhanced comfort. Please read this manual thoroughly before first use to ensure safe and optimal operation.
Image: The complete Vulpes Goods Electric Hot Water Bottle set, including the green fleece hot water bottle, the white charging clip with cable, and the matching green hand warmer pouch.
Image: An infographic illustrating the soothing and problem-solving benefits of the hot water bottle, including promoting relaxation, stress relief, reducing muscle pain and body aches, softening arthritis discomfort, and alleviating menstrual cramps.
Image: An infographic highlighting key advantages: heats in 8-12 minutes, provides warmth for up to 5 hours, made from soft and skin-friendly 6-layer material, is wireless, European certified, and includes overheating protection.
2. Important Safety Information
Your safety is paramount. Please adhere to the following guidelines:
- This product is tested and approved according to European laws and regulations.
- Initial Water Filling: The hot water bottle must be filled with water before its first use and charging. Refer to the "Setup" section for detailed instructions. Do not attempt to charge an empty hot water bottle.
- Overheating Protection: The device is equipped with multiple safety features to prevent overheating. It automatically shuts off when the internal temperature reaches 70°C. Additionally, if the air pressure inside becomes too high, or if the silicone heating wires reach 90°C, the device will automatically power down.
- Explosion-Proof Heating Clip: Always use the provided explosion-proof heating clip for charging. Ensure it is correctly placed on the hot water bottle.
- Supervision: When used by children or individuals with reduced physical, sensory, or mental capabilities, close supervision is necessary. Ensure they understand the safe use of the appliance and the potential hazards involved.
- Damage: Do not use the hot water bottle if it shows any signs of damage, leakage, or malfunction. Contact customer support immediately.
- Liquid Contact: Do not immerse the hot water bottle or charging clip in water or other liquids.
- Storage: Store the hot water bottle in a cool, dry place when not in use.
- Medical Conditions: If you have any medical conditions, consult a healthcare professional before using heat therapy products.
3. Package Contents
Please check that all items are present in your package:
- 1x Vulpes Goods Electric Hot Water Bottle
- 1x Charging Cable with Explosion-Proof Heating Clip
- 1x Hand Warmer (additional accessory)
- 1x User Manual (this document)
4. Initial Setup: Water Filling
Before first use, the electric hot water bottle must be filled with water. This is a one-time process. Do not attempt to charge the device before it is filled.
- Locate the water inlet on the hot water bottle, usually covered by a small cap or plug.
- Carefully open the cap/plug.
- Using a funnel, slowly fill the hot water bottle with clean tap water. Fill it to the recommended level, typically indicated by a fill line or until the internal heating elements are fully submerged but leaving a small air gap for expansion. Do not overfill.
- Securely close the cap/plug, ensuring there are no leaks.
- Wipe any spilled water from the exterior of the hot water bottle.
Once filled, the hot water bottle is ready for charging and use. You will not need to refill it with water for subsequent uses.
5. Operating Instructions
5.1 Charging the Hot Water Bottle
- Ensure the hot water bottle is properly filled with water (refer to Section 4).
- Connect the explosion-proof heating clip to the designated port on the hot water bottle. Ensure a secure connection.
- Plug the charging cable into a standard electrical outlet.
- An indicator light on the charging clip will illuminate, signaling that the device is charging.
- The hot water bottle typically takes 8 to 12 minutes to reach its optimal temperature.
- Once the hot water bottle reaches approximately 70°C, the charging process will automatically stop, and the indicator light will turn off.
- Unplug the charging cable from the outlet and then carefully remove the heating clip from the hot water bottle.
Image: The electric hot water bottle connected to its charging clip and power outlet, illustrating the charging process. The charging clip is white and attaches to a port on the green fleece hot water bottle.
Image: This image highlights the fast heating technology, providing warmth in minutes, and the improved design featuring double heat protection for enhanced safety and efficiency. It also shows a child using the hot water bottle.
5.2 Using the Hot Water Bottle
After charging, the hot water bottle is ready for use. It will provide warmth for approximately 3 to 5 hours, depending on environmental conditions and how it is used.
- Placement: Place the warm hot water bottle on the desired area of your body. It is suitable for the back, neck, shoulders, abdomen, or to warm a bed.
- Enhanced Warmth Retention: To extend the warmth duration, place the hot water bottle inside the included hand warmer pouch or under a blanket.
- Versatile Use: The soft, 6-layer flannel material makes it comfortable for direct skin contact. It can be used to alleviate muscle pain, joint discomfort, menstrual cramps, or simply for general warmth.
- For All Ages: This hot water bottle is safe for both adults and children (under supervision) to warm beds or provide comfort.
Image: A child comfortably using the electric hot water bottle on their abdomen while relaxing on a couch, demonstrating its suitability for younger users.
Image: A man relaxing on a sofa with the electric hot water bottle on his lap, highlighting its ease of use and comfort for adults without the need for refilling with hot water.
5.3 Using the Included Hand Warmer
The additional hand warmer pouch provides extra warmth and versatility.
- Insert the charged electric hot water bottle into the hand warmer pouch.
- Place your hands inside the pouch for immediate warmth.
- The hand warmer can also be placed on other body parts like the abdomen, back, or shoulders for targeted warmth, especially useful for menstrual discomfort or localized muscle pain.
Image: A person holding the green hand warmer pouch on their lap, demonstrating its use for keeping hands warm.
6. Maintenance and Care
- Cleaning: The exterior of the hot water bottle can be cleaned manually with water. Do not machine wash. Ensure the charging port is sealed and dry before cleaning. Do not immerse the entire unit in water.
- Storage: When not in use, store the hot water bottle in a clean, dry place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the hot water bottle and charging cable for any signs of wear, damage, or leaks. If any damage is found, discontinue use and contact customer support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Hot water bottle does not heat up. | Charging clip not properly connected. Power outlet not working. Hot water bottle not filled with water. Internal safety mechanism activated. | Ensure the charging clip is securely attached. Try a different power outlet. Verify the hot water bottle is filled with water (Section 4). If the device recently overheated, allow it to cool down before attempting to charge again. |
| Indicator light does not turn on during charging. | Loose connection. Faulty power outlet. Device already fully charged. | Check all connections. Try a different outlet. If the device is already warm, it might be fully charged. |
| Hot water bottle heats up but quickly cools down. | Environmental factors (cold room). Not using the hand warmer or blanket for insulation. | Use the hot water bottle in a warmer environment. Place it inside the hand warmer pouch or under a blanket to retain heat longer. |
| Leakage detected. | Water inlet cap not securely closed. Damage to the hot water bottle. | Ensure the water inlet cap is tightly sealed. If there is any damage to the hot water bottle itself, discontinue use immediately and contact customer support. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Vulpes Goods |
| Model Number | Kruik (geen set) |
| Product Dimensions (L x W x H) | 15 x 18 x 26 cm |
| Weight | 500 g |
| Material | Polypropylene, 6-layer flannel exterior |
| Color | Green |
| Special Features | Fast Heating, Safety (Overheating Protection, Explosion-Proof Clip), Flexible Use, Wireless, Rechargeable |
| Heating Time | 8-12 minutes |
| Heat Retention | Up to 3-5 hours (longer with insulation) |
| Safety Certifications | European laws and regulations compliant |
| Age Recommendation | Adult (suitable for children under supervision) |
9. Warranty and Customer Support
Vulpes Goods offers a 100% satisfaction guarantee. If you are not satisfied with your electric hot water bottle, you may return your order free of charge within 30 days of purchase.
For any questions, comments, or support needs, please contact our customer-friendly team. We are committed to ensuring your satisfaction.
Contact information (placeholder, as not provided in source):
- Website: www.vulpesgoods.com (example)
- Email: support@vulpesgoods.com (example)
- Phone: +1-XXX-XXX-XXXX (example)
