WELLFOR NK0711

Download PDF
Contents
WELLFOR Logo

WELLFOR 10-Inch Wall Mounted Shower Faucet Set

User Manual

Product Overview

The WELLFOR 10-Inch Wall Mounted Shower Faucet Set is a dual-head built-in shower system designed to provide a versatile and comfortable showering experience. It features a 10-inch rainfall shower head and a handheld spray, both controlled by a 2-way diverter and a single-lever pressure-balanced brass valve. This system is constructed from durable 304 stainless steel and brass components with a matte black finish, ensuring long-lasting quality and a modern aesthetic.

WELLFOR 10-Inch Wall Mounted Shower Faucet Set components

Figure 1: Complete WELLFOR 10-Inch Wall Mounted Shower Faucet Set.

Key Features:

  • Advanced Shower Technology: 10-inch round shower head with air injection technology for consistent water flow, even under low pressure. Includes a 59-inch stainless steel hose for the handheld spray.
  • Dual Functionality: Offers both overhead rainfall shower and handheld spray options for flexible use.
  • Premium Materials: Constructed from durable 304 stainless steel for the shower head, arm, and handheld, with a brass valve body and stainless steel control panel.
  • Practical Design: Features a backflow prevention hand shower holder for hygiene and a pressure balance ceramic cartridge with diverter for stable water pressure.
  • Effortless Control: Single-lever design for easy adjustment of water flow and temperature, with a flow rate of 1.5 GPM.

Installation and Setup

Installation of this wall-mounted shower system requires plumbing knowledge and should ideally be performed by a qualified professional. Ensure all local plumbing codes are followed. The system is designed for wall-mount installation and includes all necessary components as shown in the product images.

Components Included:

  • 10-inch Rainfall Shower Head
  • Shower Arm
  • Handheld Shower with 59-inch Stainless Steel Hose
  • Pressure-balanced Brass Valve Body
  • Stainless Steel Control Panel with Single Lever and Diverter
  • Hand Shower Holder with Backflow Prevention

Pre-Installation Checklist:

  1. Verify all components are present and undamaged.
  2. Ensure water supply lines are turned off at the main shut-off valve.
  3. Gather necessary tools (e.g., pipe wrench, sealant tape, level, drill).
  4. Confirm wall structure can support the installation and accommodate the built-in valve.

Installation Steps (General Guidance):

Note: These are general steps. Refer to detailed diagrams and consult a professional for precise installation.

  1. Prepare Wall Opening: Create an opening in the wall for the valve body, ensuring proper depth and alignment with finished wall surface.
  2. Install Valve Body: Secure the brass valve body within the wall, connecting hot and cold water supply lines and outlet lines for the shower head and handheld spray. Ensure the valve is level and securely mounted.
  3. Install Shower Arm: Thread the shower arm into the appropriate outlet from the valve body, ensuring it extends sufficiently from the wall.
  4. Attach Shower Head: Secure the 10-inch rainfall shower head to the shower arm.
  5. Install Handheld Connection: Install the wall outlet for the handheld hose and the hand shower holder.
  6. Connect Handheld Spray: Attach the 59-inch stainless steel hose to the wall outlet and the handheld spray.
  7. Install Control Panel: Once plumbing connections are complete and tested for leaks, install the stainless steel control panel over the valve body, securing it to the wall.
  8. Test System: Turn on the main water supply and thoroughly test all functions for proper operation and leaks.
Shower system with dimensions

Figure 2: Product dimensions for installation planning.

Installed shower system close-up

Figure 3: Close-up view of the installed shower system components.

Operating Instructions

The WELLFOR shower system is designed for intuitive operation, allowing easy control over water flow, temperature, and spray function.

Water Flow and Temperature Control:

  • The single lever handle on the control panel manages both water flow and temperature.
  • To turn on the water and adjust flow, lift the lever.
  • To adjust temperature, rotate the lever: typically, counter-clockwise for hotter water and clockwise for colder water. The pressure balance ceramic cartridge ensures stable water temperature, preventing sudden changes.
  • To turn off the water, push the lever down to its original position.

Diverter Function (2-Way):

  • The smaller knob or lever on the control panel is the 2-way diverter.
  • Rotate or pull/push this diverter to switch between the overhead rainfall shower and the handheld spray.
  • Ensure the diverter is fully engaged in one position for optimal water pressure to the selected outlet.
Close-up of shower valve control

Figure 4: Detailed view of the single-lever and diverter controls.

Shower system showing dual functionality

Figure 5: Illustration of the dual functionality in use.

Maintenance and Care

Proper maintenance will ensure the longevity and optimal performance of your WELLFOR shower system. The matte black finish and stainless steel/brass components require specific care.

Cleaning the Finish:

  • Use a soft, damp cloth and mild soap (non-abrasive) for regular cleaning.
  • Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the matte black finish and metal surfaces.
  • Rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.

Shower Head Nozzle Maintenance:

  • The silicone nozzles on the rainfall shower head can be prone to mineral buildup (limescale).
  • Periodically rub the nozzles with your finger or a soft brush to dislodge any mineral deposits.
  • For stubborn buildup, a solution of white vinegar and water can be used, applied with a soft cloth. Do not soak metal parts in vinegar for extended periods.

General Care:

  • Regularly check for any signs of leaks around connections. Tighten connections if necessary, but do not overtighten.
  • If water flow significantly decreases, check for blockages in the shower head or handheld spray.

Troubleshooting

This section addresses common issues you might encounter with your WELLFOR shower system. For problems not listed here or if solutions do not resolve the issue, please contact customer support or a qualified plumber.

ProblemPossible CauseSolution
Low Water Pressure
  • Mineral buildup in shower head nozzles.
  • Partially closed shut-off valve.
  • Debris in the valve or supply lines.
  • Clean shower head nozzles (refer to Maintenance).
  • Ensure all water supply valves are fully open.
  • Consult a plumber to check for blockages in lines or valve.
Water Temperature Fluctuations
  • Issue with pressure balance cartridge.
  • Inconsistent hot/cold water supply.
  • Ensure hot water heater is functioning correctly.
  • If problem persists, the pressure balance cartridge may need inspection or replacement by a professional.
Leaking from Shower Head or Handheld
  • Loose connections.
  • Damaged O-rings or seals.
  • Faulty diverter.
  • Check and tighten all connections (do not overtighten).
  • Inspect O-rings and seals for wear; replace if necessary.
  • If diverter is faulty, professional repair or replacement may be needed.
Diverter Not Switching Properly
  • Debris in diverter mechanism.
  • Worn diverter cartridge.
  • Attempt to flush the system by running water through both outlets.
  • If issue persists, the diverter cartridge may need professional inspection or replacement.

Specifications

AttributeDetail
BrandWELLFOR
Model NumberNK0711
ColorMatte Black
MaterialBrass, Stainless Steel
Finish TypeMatte
Number of Handles1
Mounting TypeWall Mount
Head Size10 inches (Rainfall Shower Head)
Handheld Hose Length59 inches
Flow Rate1.5 GPM (Gallons Per Minute)
Item Weight9 pounds
Product Dimensions10 x 10 x 10 inches (approximate, as per product info)
UPC769047274569

Warranty and Support

For specific warranty information regarding your WELLFOR 10-Inch Wall Mounted Shower Faucet Set, please refer to the documentation included with your purchase or contact WELLFOR customer service directly. Warranty terms typically cover manufacturing defects and material flaws for a specified period from the date of purchase.

If you require technical assistance, have questions about installation, or need to report a defect, please contact the manufacturer or the seller, WELLFOR-USA. Keep your purchase receipt as proof of purchase for any warranty claims.

Visit the WELLFOR Store on Amazon

© 2024 WELLFOR. All rights reserved.

This manual is for informational purposes only. WELLFOR reserves the right to make changes to products without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.