Trevi XR 8A 202 Portable Wireless Speaker User Manual

1. Introduction

Thank you for choosing the Trevi XR 8A 202 Portable Wireless Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use and retain it for future reference.

2. Safety Information

• Do not expose the speaker to extreme temperatures, direct sunlight, or open flames.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not disassemble, repair, or modify the device yourself. Contact qualified service personnel for assistance.
• Keep the speaker away from medical devices.
• Ensure the charging port is dry before connecting the USB Type-C cable.
• Dispose of batteries and electronic components responsibly according to local regulations.

3. Package Contents

Verify that all items are present in the package:

• Trevi XR 8A 202 Portable Wireless Speaker
• USB Type-C Charging Cable
• Warranty Card
• User Manual (this document)

4. Product Overview

Familiarize yourself with the speaker's components and controls.

Image 1: Front view of the Trevi XR 8A 202 speaker, showcasing its turquoise color, black body, and dynamic LED lighting on the speaker grille.

Image 2: The Trevi XR 8A 202 speaker with a smartphone resting in the integrated holder on top, demonstrating its use as a media station.

Controls and Ports:

• Power Button: Press and hold to turn on/off.
• Play/Pause Button: Controls music playback.
• Volume Up/Next Track Button: Short press for volume up, long press for next track.
• Volume Down/Previous Track Button: Short press for volume down, long press for previous track.
• Mode Button: Switches between Bluetooth, USB, Micro SD, and AUX-IN modes.
• USB Port: For USB flash drive playback.
• Micro SD Card Slot: For Micro SD card playback.
• AUX-IN Port: For wired audio connection.
• USB Type-C Charging Port: For charging the internal battery.
• LED Indicator: Displays charging status and connection mode.

5. Setup

5.1. Charging the Speaker

1. Connect the provided USB Type-C cable to the speaker's charging port.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will illuminate during charging and turn off when fully charged.
4. A full charge typically takes approximately 3-4 hours.

5.2. Power On/Off

• To Power On: Press and hold the Power button for 2-3 seconds. You will hear an audible prompt, and the LED lights will activate.
• To Power Off: Press and hold the Power button for 2-3 seconds. You will hear an audible prompt, and the LED lights will turn off.

6. Operating Instructions

6.1. Bluetooth Connection

1. Ensure the speaker is powered on and in Bluetooth mode (the LED indicator will flash blue). If not, press the Mode button to switch to Bluetooth.
2. Enable Bluetooth on your smartphone or other compatible device.
3. Search for "Trevi XR 8A 202" in your device's Bluetooth settings.
4. Select the speaker to pair. Once connected, the LED indicator will stop flashing and remain solid blue, and you will hear a confirmation sound.
5. You can now play audio from your device through the speaker.

6.2. True Wireless Stereo (TWS) Function

The TWS function allows you to pair two Trevi XR 8A 202 speakers together for a stereo sound experience.

1. Ensure both speakers are powered on and in Bluetooth mode, but not yet connected to any device.
2. On one of the speakers (this will be the primary speaker), double-press the Play/Pause button. The speaker will emit a sound indicating it is searching for another TWS speaker.
3. The two speakers will automatically pair with each other. Once connected, you will hear a confirmation sound.
4. Now, connect your smartphone or device to the primary speaker via Bluetooth as described in section 6.1.
5. Audio will now play in stereo through both speakers.

6.3. USB/Micro SD Playback

1. Insert a USB flash drive or a Micro SD card (with supported audio files) into the corresponding port.
2. The speaker will automatically switch to USB or Micro SD mode and begin playing audio. If not, press the Mode button to select the correct source.
3. Use the Play/Pause, Volume Up/Next Track, and Volume Down/Previous Track buttons to control playback.

6.4. AUX-IN Connection

1. Connect one end of a 3.5mm audio cable (not included) to the AUX-IN port on the speaker.
2. Connect the other end of the cable to the audio output of your external device (e.g., smartphone, MP3 player).
3. Press the Mode button to switch the speaker to AUX-IN mode.
4. Control playback and volume from your external device.

6.5. LED Light Modes

The speaker features integrated LED lights. These lights typically activate automatically when the speaker is powered on and can cycle through various patterns. Specific controls for changing LED modes may vary or be automatic.

7. Water Resistance (IPX5)

The Trevi XR 8A 202 speaker is rated IPX5, meaning it is protected against low-pressure water jets from any direction. This makes it suitable for outdoor use and can withstand splashes or light rain. However, it is not designed to be submerged in water. Ensure all ports are securely closed before exposure to water.

8. Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the speaker in a cool, dry place when not in use.
• Avoid blocking the speaker grilles to ensure optimal sound quality.
• Charge the battery regularly, even if the speaker is not used for extended periods, to maintain battery health.

9. Troubleshooting

10. Specifications

11. Warranty and Support

This product is covered by a manufacturer's warranty. Please refer to the included warranty card for detailed terms and conditions. For technical support, service, or warranty claims, please contact your retailer or the official Trevi customer service channels.

For more information, visit the official Trevi website or contact their support team.