PSOS Keyless Entry Deadbolt User Manual

Introduction

Thank you for choosing the PSOS Keyless Entry Deadbolt. This smart door lock offers advanced security features and convenient access options, including app control, a touchscreen keypad, and multiple unlocking methods. This manual will guide you through the installation process, operational procedures, and maintenance tips to ensure optimal performance and longevity of your device.

Image: Front and back view of the PSOS Keyless Entry Deadbolt.

Safety Information

• Read all instructions carefully before installation and use.
• Ensure proper door preparation and alignment for correct lock function.
• Use only specified battery types (4 AA batteries) and replace all batteries simultaneously.
• Do not expose the lock to extreme temperatures or direct water immersion.
• Keep keys and access codes in a secure location.

Package Contents

Verify that all components are present before beginning installation:

• Front Panel Assembly
• Back Panel Assembly
• Mounting Plate
• Deadbolt Latch (60mm, stretchable to 70mm)
• M4*30mm Screws (E)
• M4*8mm Screws (F)
• M4*30mm Black Screws (G)
• M4*25mm Screws (H)
• Spare Screws for door thickness > 45mm
• User Manual

Specifications

Setup and Installation

For a visual guide, please refer to the official installation video below. Ensure your door meets the minimum distance and thickness requirements before proceeding.

1. Install Deadbolt Latch

Insert the deadbolt latch into the door edge. If the latch is too short for your door, stretch the 60mm latch to 70mm. Ensure the "UP" mark on the latch is facing upwards. Secure the latch to the door using the M4*25mm screws (H).

Image: Illustration of deadbolt latch installation and door compatibility check, showing minimum distance and door thickness requirements.

2. Install Front Panel

Carefully feed the cable from the front panel underneath the deadbolt latch. Align the front panel with the door hole and press it firmly into place.

3. Install Mounting Plate

Position the mounting plate over the deadbolt latch and the front panel cable. Ensure the cable passes through the designated opening in the mounting plate. Secure the mounting plate to the door using the long M4*30mm screws (E). If your door thickness is greater than 45mm, use the provided spare longer screws.

Image: Exploded view of the smart lock components, including the mounting plate, showing internal structure and security features.

4. Connect Cable and Install Back Panel

Ensure the knob on the back panel is in the vertical position. Connect the cable from the front panel to the corresponding port on the back panel. Carefully align the back panel with the mounting plate and secure it using the M4*8mm screws (F) and the M4*30mm black screw (G).

5. Install Batteries

Open the battery compartment on the back panel. Insert four (4) AA batteries, ensuring correct polarity. Close the battery compartment cover.

Image: The internal view of the smart lock's back panel, showing the battery compartment and electronic components.

6. Test the Lock

After installation, test the lock's functionality. The lock will prompt you to set up a Bluetooth administrator. Verify that the deadbolt extends and retracts smoothly when operated manually and via the keypad/app.

Image: A hand interacting with the smart lock's touchscreen keypad, demonstrating the testing phase after installation.

Operating Instructions

Unlocking Methods

The PSOS Keyless Entry Deadbolt offers five convenient ways to unlock your door:

• Fingerprint: Place your registered fingerprint on the sensor for quick access. The lock identifies fingerprints with high recognition rate in under 0.2 seconds.
• Keypad: Enter your programmed passcode on the touchscreen keypad.
• Key: Use the physical key as a traditional backup unlocking method.
• IC Card: Tap the provided IC card on the designated area of the lock.
• App Control: Use the dedicated mobile application to unlock the door remotely via Bluetooth.

Image: Visual representation of the five unlocking methods: Fingerprint, Keypad, Key, IC Card, and App.

App Control Features

Download the companion app to manage your lock. Through the app, you can:

• Add and manage up to 200 users, 150 fingerprints, and 150 passwords.
• Set auto-lock duration from 5 to 200 seconds.
• Generate temporary passwords for guests or deliveries, which expire after a set time (e.g., 5 minutes).
• Adjust the lock's volume or set it to mute mode for quiet operation, especially useful for bedroom doors.
• Monitor lock activity and access logs.

Image: Screenshot of the mobile app interface demonstrating user management and auto-lock settings.

Anti-Peeping Password

Enhance security by using the anti-peeping feature. You can enter random digits before or after your actual passcode (up to 16 digits total) to prevent others from guessing your code. The lock will still recognize the correct sequence within the longer string.

Image: Illustration of the anti-peeping password feature, showing how random digits can be added before and after the correct passcode.

Voice Control (Gateway Required)

For remote control and voice assistant integration (e.g., Alexa), a compatible gateway (sold separately) is required. Pair your lock with the gateway to enable these advanced features.

Image: Depiction of voice control functionality with a smart speaker and gateway, allowing remote unlocking.

Maintenance

• Cleaning: Wipe the lock's surface with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Battery Replacement: When the low battery indicator appears, replace all four AA batteries promptly. Using high-quality alkaline batteries is recommended for optimal performance.
• Regular Checks: Periodically check that all screws are tight and the lock operates smoothly.

Troubleshooting

Warranty and Support

Your PSOS Keyless Entry Deadbolt is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official PSOS website. Keep your purchase receipt for warranty claims.