1. Safety Warnings
WARNING: Not suitable for children under 3 years. Contains small parts that can be swallowed. Adult supervision is recommended during operation and battery charging.
- Keep batteries away from children.
- Do not mix old and new batteries, or different types of batteries.
- Ensure correct polarity when inserting batteries.
- Do not short-circuit battery terminals.
- Remove batteries from the product if it will not be used for an extended period.
- Dispose of batteries responsibly according to local regulations.
2. Package Contents
The Amewi 2-in-1 RC Truck Kit includes the following items:
- 1x RC Tractor (G836E) with Removable Low Loader
- 1x RC Excavator (G041E)
- 2x Remote Controls (one for truck, one for excavator)
- 2x Li-Ion 1S 3.7V 500mAh Batteries
- 2x USB Charging Cables
- 1x Screwdriver
- 1x Instruction Manual (DE/EN)
Required for Operation (Not Included):
- 4x 1.5V AA Mignon batteries for the remote controls
3. Setup
3.1 Battery Installation
3.1.1 Vehicle Batteries (Tractor and Excavator)
- Locate the battery compartment on the underside of both the tractor and the excavator.
- Open the battery compartment cover using the provided screwdriver.
- Connect the Li-Ion 1S 3.7V 500mAh battery to the vehicle's connector, ensuring correct polarity.
- Carefully place the battery inside the compartment and close the cover. Secure with the screw.
3.1.2 Remote Control Batteries
- Locate the battery compartment on the back of each remote control.
- Open the battery compartment cover.
- Insert 2x 1.5V AA Mignon batteries into each remote control, observing the correct polarity (+/-).
- Close the battery compartment cover.
3.2 Battery Charging
Use the provided USB charging cables to charge the vehicle batteries.
- Connect the vehicle battery to the USB charging cable.
- Plug the USB cable into a standard USB power adapter (not included) or a computer USB port.
- The charging indicator on the USB cable will show the charging status (e.g., red for charging, green for fully charged).
- Charging time for each battery is approximately 120-180 minutes for the truck battery and 120 minutes for the excavator battery.
- Disconnect the battery once fully charged.
4. Operating Instructions
4.1 Powering On/Off
- Turn on the remote controls using their respective ON/OFF switches.
- Turn on the tractor and excavator using their respective ON/OFF switches.
- The vehicles and remotes will automatically pair using the 2.4 GHz anti-interference system.
4.2 Tractor (G836E) Operation
The tractor is controlled by its dedicated remote control.
- Driving: Use the joysticks on the remote to control forward, backward, left, and right movement.
- Lights and Sounds: Activate or deactivate light and sound effects via dedicated buttons on the remote control.
- Low Loader: The low loader is removable. Its supports and access ramp can be manually adjusted (up/down) to load and unload the excavator or other items.
- Steering Adjustment: Manual steering adjustment is available on the vehicle for fine-tuning.
4.3 Excavator (G041E) Operation
The excavator is controlled by its dedicated remote control.
- Driving: Use the joysticks to control the left track (forward/backward) and right track (forward/backward) independently. This allows for precise movement and turning in place.
- Boom and Shovel: Use the designated buttons on the remote control to raise and lower the boom and operate the shovel.
- Upper Carriage Rotation: The upper carriage of the excavator can be rotated manually.
5. Maintenance
- Cleaning: Wipe the vehicles and remote controls with a soft, dry cloth. Do not use water or chemical cleaners.
- Battery Care: Always remove batteries from the vehicles and remote controls when not in use. Store batteries in a cool, dry place. Do not overcharge or deep discharge the Li-Ion batteries.
- Storage: Store the kit in a dry environment, away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Vehicle not responding:
- Ensure both the vehicle and remote control are switched ON.
- Check if batteries in both the vehicle and remote control are fully charged and correctly installed.
- Try re-pairing by turning both off and then on again.
- Short operating time:
- Ensure batteries are fully charged before use.
- Battery performance may decrease over time; consider replacing if significantly reduced.
- Interference during operation:
- Move away from other electronic devices that might cause interference.
- Ensure you are within the specified operating range (approx. 30m).
7. Specifications
7.1 Tractor (G836E) with Low Loader
| Feature | Detail |
|---|---|
| Scale | 1:24 |
| Total Length | 830 mm |
| Width | 100 mm |
| Height | 130 mm |
| Weight (without battery) | 950 g |
| Main Material | Plastic |
| Battery | Li-Ion 1S 3.7V 500mAh |
| Run Time | 15-20 min |
| Remote Control | 9-channel, 2.4 GHz |
| Range | Approx. 30 m |
| Charger | USB Cable |
| Charge Time | Approx. 120-180 min |
7.2 Excavator (G041E)
| Feature | Detail |
|---|---|
| Scale | 1:24 |
| Length | 310 mm |
| Width | 105 mm |
| Height | 220 mm |
| Weight (without battery) | 350 g |
| Main Material | Plastic |
| Battery | Li-Ion 1S 3.7V 500mAh |
| Run Time | Up to 20 min |
| Remote Control | 6-channel, 2.4 GHz |
| Range | Approx. 30 m |
| Charger | USB Cable |
| Charge Time | Approx. 120 min |
8. Warranty and Support
For warranty information and technical support, please refer to the official Amewi website or contact your retailer. Keep your purchase receipt as proof of purchase.