ANCHEER AMAK00032
ANCHEER Foldable Electric Bike User Manual
Model: AMAK00032
Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ANCHEER Foldable Electric Bike. Please read this manual thoroughly before your first ride and retain it for future reference. Adherence to these instructions will ensure optimal performance and longevity of your e-bike.

Image: The ANCHEER Foldable Electric Bike, black in color, shown in its unfolded state. It features a compact design with 14-inch wheels, disc brakes, and a central battery housing. The handlebars are equipped with a display, bell, and throttle.
Safety Guidelines
Your safety is paramount. Always wear a helmet and appropriate safety gear when riding. Observe all local traffic laws and regulations. Do not operate the e-bike under the influence of alcohol or drugs.
- Ensure the battery is securely installed before riding.
- Check tire pressure and brake functionality before each use.
- Be aware of your surroundings and ride defensively.
- Do not exceed the maximum weight recommendation of 265 lbs (120 kg).
- The e-bike is UL 2849 Certified, ensuring safety of the electrical drive system.

Image: A certificate of compliance from SGS, indicating UL 2849 certification for the e-bike, confirming its electrical safety standards.
Setup and Assembly
The ANCHEER Foldable Electric Bike arrives 95% pre-assembled. Follow these steps for final setup:
- Unfolding the Bike: Carefully unfold the frame until it locks into place. Ensure all quick-release levers are securely fastened.
- Handlebar Adjustment: Adjust the handlebar height to a comfortable riding position and secure the stem clamp.
- Seat Adjustment: Adjust the seat post height. Ensure the seat post is inserted beyond the minimum insertion mark and the quick-release clamp is tightened securely. The recommended height range for riders is 4'6''-5'6''.
- Pedal Installation: Attach the pedals, ensuring they are tightened firmly. Note that pedals are often marked 'L' for left and 'R' for right.
- Initial Battery Charge: Fully charge the battery before the first use. Connect the charger to the charging port on the battery and then to a power outlet. A full charge typically takes approximately 5 hours.

Image: A person demonstrating the folding process of the ANCHEER electric bike, showing how it can be compactly stored or transported in a car trunk. The bike weighs 49.6 lbs.

Image: Close-up view of the ANCHEER electric bike's seat post adjustment mechanism, highlighting the safety line to prevent over-extension.
Operating Instructions
Battery and Charging
The e-bike is equipped with a 48V 7.8Ah/374.4Wh Lithium-ion battery. The charging port is located on the battery housing. Always use the provided charger.
- Charging Time: Approximately 5 hours for a full charge.
- Range: Up to 30 miles per charge in Pedal-Assist System (PAS) mode.

Image: A detailed view of the 48V 7.8Ah Lithium-ion battery integrated into the ANCHEER electric bike's frame, showing the internal cell structure and the charging port. The battery is UL 2271 certified.
Working Modes
Your ANCHEER e-bike offers three distinct riding modes:
- Pure Electric Mode (Throttle): Ride directly using the throttle without pedaling. Ideal for effortless cruising.
- Pedal-Assist Mode (PAS): The motor provides assistance as you pedal, making cycling easier and extending range. The LED display shows the current pedal-assist level.
- Normal Bike Mode (Manpower): Ride the bike like a traditional bicycle without any electrical assistance. No power is needed for this mode.

Image: An illustration depicting the three riding modes: Pure Electric Mode (scooter icon), Boost Mode (bicycle with power assist icon), and Manpower Model (bicycle icon). A person is shown riding the e-bike in an urban setting.
Controls and Display
The handlebars feature a meter display, bell, and throttle. The LED display provides key information such as pedal-assist levels and battery life.
- Speed Limit: There are 3 levels for throttle and PAS mode: LOW (<=6mph), MED (<=14mph), HIGH (<=20mph).
- Cruise Control: When speed is >= 6 mph, press and hold the "6km" button for 3 seconds to activate cruise control.
- Headlight Control: The headlight can be controlled via the meter display.
- Push Assist: This feature provides low-speed assistance for walking the bike.

Image: A close-up view of the ANCHEER electric bike's handlebars, highlighting the meter display, bell, and throttle. Text overlays indicate features like Cruise Mode, Headlight Control, and Push Assist.
Maintenance
Regular maintenance ensures the safety and longevity of your ANCHEER electric bike.
- Brakes: The bike is equipped with dual disc brakes. Regularly inspect brake pads and rotors for wear. Adjust brake tension as needed to ensure responsive braking.
- Tires: Check tire pressure before each ride. The 14-inch tires feature an anti-slip rubber layer, sealed steel rims, and anti-puncture properties. Maintain proper inflation for optimal performance and safety.
- Chain: Keep the chain clean and lubricated to prevent rust and ensure smooth operation.
- Battery Care: Store the battery in a cool, dry place. Avoid fully discharging the battery frequently. Charge it regularly, even if not in use, to maintain battery health.
- General Cleaning: Clean the bike with a damp cloth. Avoid using high-pressure washers directly on electrical components.

Image: A close-up view of the ANCHEER electric bike's 14-inch wheel and dual disc brakes. Text highlights features like anti-slip rubber layer, sealed steel rims, and anti-puncture design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike not powering on | Battery not charged or improperly installed; loose electrical connection. | Ensure battery is fully charged and securely seated. Check all visible cable connections. |
| Motor not assisting | Low battery; PAS level set to zero; brake levers engaged; motor connection issue. | Charge battery. Increase PAS level on display. Ensure brake levers are fully released. Check motor cable connection. |
| Brakes feel weak | Worn brake pads; loose brake cable; air in hydraulic system (if applicable). | Inspect and replace brake pads if worn. Adjust brake cable tension. If problem persists, consult a professional bike mechanic. |
| Unusual noises during ride | Loose components; dry chain; rubbing brakes. | Check all bolts and quick releases. Lubricate chain. Inspect brake alignment. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact ANCHEER customer service.
Specifications
| Model Name | AMAK00032 |
| Bike Type | Electric Bike |
| Motor | 350W (Peak 500W) Brushless Motor |
| Battery | 48V 7.8Ah / 374.4Wh Lithium-ion |
| Top Speed | 20 MPH |
| Max Range (PAS Mode) | Up to 30 miles |
| Wheel Size | 14 Inches |
| Frame Material | Aluminum |
| Brake Style | Disc (Dual Disc Brakes) |
| Net Weight | 49.6 lbs |
| Maximum Load | 265 lbs (120 kg) |
| Recommended Height | 4'6'' - 5'6'' |
| Certification | UL 2849 Certified (Whole Electric Bike) |

Image: A diagram illustrating the dimensions of the ANCHEER electric bike, including height, length, and folded size. Key specifications such as recommended height, load capacity (Max 265 LBS), and bicycle weight (49.6 LBS) are also displayed.
Warranty and Support
ANCHEER provides comprehensive customer support and warranty coverage for your electric bike.
- Warranty: 1-year guarantee on the motor, battery, and charger.
- Customer Service: Lifelong technical support and update services are provided. For any questions or assistance, please contact ANCHEER customer service.

Image: A graphic illustrating ANCHEER's after-sales service, including "24-Hour Rapid Response," "Free Parts Replacement," and a "1 Year Warranty" badge.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
