SMONET Smart Door Lock M6 Tuya User Manual

1. Introduction

The SMONET Smart Door Lock M6 Tuya is an advanced keyless entry system designed to enhance home security and convenience. This smart deadbolt offers multiple unlocking methods, including fingerprint, keypad code, smart app control, key fobs, and traditional physical keys. With integrated Wi-Fi connectivity, it allows for remote management and voice control via Alexa and Google Home.

Key features include real-time operation logs, auto-lock functionality, and a durable, weather-resistant design. This manual provides detailed instructions for installation, setup, operation, maintenance, and troubleshooting to ensure optimal performance of your SMONET Smart Door Lock.

Overview of the SMONET Smart Door Lock M6 Tuya, showcasing the keypad, fingerprint sensor, and accompanying mobile application interface.

2. Included Components

Before beginning installation, please ensure all components are present:

• Exterior Lock Assembly
• Interior Lock Assembly
• G3 WiFi Gateway
• Latch
• Lock Screws
• Key Fobs (Quantity: 2)
• Physical Keys (Quantity: 3)
• User Manuals
• Diagram Template
• Mounting Plate

3. Product Specifications

4. Installation Guide

The SMONET Smart Door Lock is designed for easy DIY installation. A screwdriver is typically the only tool required. Ensure your door meets the specified dimensions before proceeding.

4.1 Door Compatibility Check

Verify your door's dimensions and type to ensure compatibility. The lock fits standard left or right-hand doors with a thickness between 1.5''-1.9'' (38-48 mm).

Diagram illustrating required door hole diameter, thickness, backset, and minimum distance for proper installation.

4.2 Step-by-Step Installation

For a visual guide, please refer to the official installation video below:

1. Install the Deadbolt: Ensure the deadbolt is adjusted to the correct backset (2-3/8" or 2-3/4"). The word "UP" on the deadbolt should face upwards, and the bolt should be in the retracted (unlocked) position. Insert the deadbolt into the door edge and secure it with two screws.
2. Install the Exterior Assembly: Place the spindle vertically before inserting it into the deadbolt. Pass the cable through the right bottom hole of the mounting plate, ensuring the side with "Cable Hole" faces outside. Keep the spindle vertical and pass the cable under the deadbolt.
3. Secure the Mounting Plate: Screw the mounting plate firmly to the door, ensuring it is flush and stable.
4. Install the Interior Assembly: Keep the knob on the interior assembly vertical. Plug the cable from the exterior assembly into the designated port on the interior assembly. Carefully align the interior assembly with the mounting plate and spindle, then tighten the screws into the interior assembly to secure it.
5. Insert Batteries: Open the battery cover on the interior assembly and insert four (4) AA batteries (not included), ensuring correct polarity. Close the battery cover.

5. Initial Setup and App Pairing

To fully utilize the smart features of your SMONET lock, you need to pair it with the "Smart Life" app and connect the G3 WiFi Gateway.

5.1 Pairing the Lock to Your Phone

Download the "Smart Life" app from Google Play (Android) or the App Store (iOS). Sign up and log into your account.

1. Ensure Bluetooth is enabled on your smartphone.
2. Touch the keypad of the lock to wake it up.
3. In the Smart Life app, tap "Add Device" or the "+" icon. The app should discover the Smart Lock.
4. Add the discovered lock to your account.
5. Change Door Opening Direction: In the app, navigate to Settings → Unlock Direction. Choose Left or Right based on your door's hinge side. Face the touchscreen to determine your door hinge location.
6. Change Admin Passcode: Tap Member Management → Admin → Add Code. Enter a 6-8 digit password and set a code name. Once the lock and phone are paired, the default admin passcode (123456) becomes invalid.

5.2 Adding the Gateway to the App

The G3 WiFi Gateway enables remote control and voice assistant integration.

1. Ensure your smartphone is connected to a 2.4GHz WiFi network (5G is not supported).
2. Plug in the G3 Gateway. Press and hold the reset button on the back until the blue indicator remains solid and the red indicator flashes slowly.
3. In the Smart Life app, tap the "+" icon in the top right corner, then tap "Add".
4. Choose your 2.4GHz WiFi network and enter its password. Tap "Next".
5. Wait for the Gateway to complete the connection. Once connected, the Gateway will appear on the list of "All devices".
6. Tap "Gateway" from the device list, then tap "Add device". The app will automatically search for your Smart Lock.
7. Confirm the Smart Lock to pair it with the Gateway. Gateway and lock pairing is successful when the Smart Lock appears on the list of online devices under the Gateway.

6. Operating Your Smart Lock

6.1 Unlocking Methods

• Fingerprint Unlock: Place your registered finger on the fingerprint sensor. The lock will unlock in approximately 0.3 seconds.
• Keypad Code: Enter your 6-8 digit passcode on the keypad, then press the '#' key to confirm. The lock supports one-time, permanent, and anti-peep codes.
• Key Fob: Present the registered key fob to the lock's sensor.
• Smart App Control: Use the "Smart Life" app to remotely unlock your door from anywhere. The app also provides real-time electronic operation logs.
• Voice Control (Alexa/Google Home): Once connected to the G3 WiFi Gateway, you can use voice commands (e.g., "Alexa, unlock the front door") to operate the lock.
• Physical Key: In case of emergency or battery depletion, use the provided physical keys to unlock the deadbolt.

The lock features a fast fingerprint sensor for quick and secure access.

Control your SMONET Smart Lock hands-free using voice commands with compatible smart home assistants.

6.2 Auto-Lock Feature

The auto-lock feature automatically locks the door after a set period (5-900 seconds) for added security. This can be configured within the "Smart Life" app.

The auto-lock feature provides peace of mind, automatically securing your door after a customizable delay.

7. Maintenance

7.1 Battery Replacement

The lock requires four (4) AA batteries. When the battery level is low, the lock will provide an audible warning. Replace all four batteries simultaneously to ensure optimal performance. The app also provides real-time battery status.

The lock features long battery life and a Type-C emergency port for temporary power if batteries run out.

7.2 Cleaning

Clean the lock's exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or electronic components. Regularly wipe the fingerprint sensor to ensure accurate readings.

8. Troubleshooting

9. Warranty and Support

SMONET is committed to customer satisfaction. Your Smart Door Lock M6 Tuya comes with the following:

• 30-Day Return Policy: If you are not satisfied with your purchase, you may return it within 30 days.
• 1-Year Replacement: SMONET provides a 1-year replacement policy for all parts of the product.

For any issues, questions, or technical assistance, please contact SMONET's professional service team. Refer to the contact information provided in your product packaging or on the official SMONET website.