Introduction
The CHUWI Hipen H7 Stylus Pen is an active stylus designed for precise input on compatible devices. Featuring 4096 levels of pressure sensitivity and MPP 2.0 protocol support, it offers a natural writing and drawing experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your Hipen H7.
Package Contents
Please check the package for the following items:
- CHUWI Hipen H7 Stylus Pen
- AAAA Battery (pre-installed or separate)
- Replacement Pen Tip (if included)
Setup
1. Battery Installation
The Hipen H7 is powered by an AAAA battery. If the battery is not pre-installed, follow these steps:
- Gently twist the top cap of the stylus counter-clockwise to open the battery compartment.
- Insert one AAAA battery with the positive (+) end facing towards the pen tip.
- Twist the top cap clockwise to securely close the battery compartment.
This image illustrates the components of the Hipen H7, including the AAAA battery location.
2. Device Compatibility
The Hipen H7 stylus supports the MPP (Microsoft Pen Protocol) protocol. It is compatible with:
- CHUWI Hi10 Max
- CHUWI FreeBook
- Other devices that support the MPP protocol.
Models not supported: Hipad Xpro, Hipad 11, Minibook X, Hi10 XPro.
This image demonstrates the stylus's compatibility with Microsoft Surface PC series and other MPP-enabled devices.
3. Pairing
The Hipen H7 stylus does not require Bluetooth pairing. It works with Windows Ink and is ready to use once the battery is installed and the device supports MPP.
Operating Instructions
1. Basic Usage
Simply touch the pen tip to the screen of your compatible device to begin writing, drawing, or navigating. The stylus offers 4096 levels of pressure sensitivity for varied line thickness and shading.
This image illustrates the Hipen H7 in use for various creative and productivity tasks on different devices.
2. Side Buttons
The Hipen H7 features two side buttons:
- Right-Click Button: Press and hold this button while touching the screen to activate the right-click function, similar to a mouse.
- Eraser Button: Press and hold this button while touching the screen to activate the eraser function. Note: The eraser function is only available for Intel devices.
This diagram highlights the physical features of the Hipen H7, including the side buttons.
3. Palm Rejection
The stylus supports palm rejection, allowing you to rest your hand naturally on the screen while writing or drawing without interfering with the stylus input.
4. Automatic Sleep Function
To conserve battery life, the Hipen H7 will automatically enter a sleep state after 60 seconds of inactivity. It will reactivate automatically when you touch the tip to the screen again.
This image visually represents the automatic sleep function, which helps extend battery life.
Maintenance
1. Cleaning
Wipe the stylus body with a soft, dry cloth. Do not use harsh chemicals or abrasive materials, as they may damage the finish or internal components.
2. Pen Tip Replacement
If the pen tip becomes worn or damaged, it can be replaced. Gently pull out the old tip and insert a new one firmly until it clicks into place. (Replacement tips may be sold separately or included in the package).
This image demonstrates the replaceable fine tip of the Hipen H7 stylus.
3. Battery Replacement
When the stylus performance degrades or it stops responding, replace the AAAA battery following the instructions in the "Battery Installation" section.
Troubleshooting
- Stylus not responding:
- Ensure the AAAA battery is correctly installed and has sufficient charge. Replace the battery if necessary.
- Verify that your device supports the MPP protocol.
- Restart your device.
- Inaccurate input or jitter:
- Ensure the pen tip is clean and not damaged. Replace if necessary.
- Check for any magnetic interference near your device.
- Ensure your device's screen is clean.
- Side buttons not working:
- Confirm that the eraser function is only supported on Intel devices.
- Ensure the stylus is properly connected (no pairing needed, but ensure battery is good).
Specifications
| Feature | Detail |
|---|---|
| Model | CHUWI H7 Stylus Pen (Hipen H7) |
| Pressure Sensitivity | 4096 levels |
| Protocol | MPP 2.0 |
| Pen Tip Size | 1.0mm (fine tip) |
| Battery Type | AAAA Battery |
| Battery Life | Up to 180 days (approximate, based on usage) |
| Automatic Sleep | After 60 seconds of inactivity |
| Dimensions | Length: 144mm, Diameter: 9.5mm |
| Weight | 16g (stylus only) / 45g (with battery) |
| Material | Plastic |
| Compatible Devices | CHUWI Hi10 Max, FreeBook, and other MPP-enabled devices |
This image provides a visual overview of the stylus's key features and specifications.
Warranty and Support
Warranty Information
CHUWI products typically come with a limited warranty. Please refer to the warranty card included with your purchase or visit the official CHUWI website for detailed warranty terms and conditions specific to your region.
Customer Support
For technical assistance, troubleshooting, or further inquiries, please contact CHUWI customer support through their official website or the contact information provided in your product packaging.
