intasting Gooseneck Electric Kettle User Manual

1. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or the appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Scalding may occur if the lid is removed during the heating cycle.
• This appliance is for household use only.
• Ensure the kettle is filled between the MIN and MAX fill lines.

2. Product Overview

The intasting Gooseneck Electric Kettle is designed for precise temperature control, ideal for pour-over coffee and various teas. It features a fine gooseneck spout for controlled pouring, a digital display, and a temperature hold function.

Components

• Gooseneck Kettle (0.9L capacity)
• 360° Swivel Base with Control Panel
• User Manual (this document)
• Warranty Card

Figure 1: The intasting Gooseneck Electric Kettle and its base. The kettle is forest green with a wooden-look handle, sitting on a black control base with a digital display.

Key Features

• ±1℉ Precise Temperature Control: Smart power adjustment maintains water temperature within 1 degree of the target.
• 9mm Fine Gooseneck Spout: Designed for smooth and steady water flow, ideal for pour-over methods.
• 2-Hour Temperature Hold: Keeps water at the set temperature for up to 2 hours.
• °F / °C Switch: Easily toggle between Fahrenheit and Celsius display.
• 100% Stainless Steel Interior: Food-grade 304 stainless steel, BPA-free and rust-resistant.
• Built-in Brew Stopwatch: Integrated timer on the display for consistent brewing.
• 1500W Rapid Boil: Quickly heats 0.9L of water.

3. Setup and First Use

Unpacking

1. Carefully remove all components from the packaging.
2. Remove any protective films or stickers from the kettle and base.
3. Retain packaging for future storage or transport.

Initial Cleaning

Before first use, or if the kettle has been stored for a long period, it is recommended to clean it.

1. Fill the kettle with clean water to the MAX fill line.
2. Boil the water (see "Operating Instructions" for details).
3. Discard the boiled water.
4. Repeat this process 2-3 times to ensure the kettle is clean and free of any manufacturing residues.
5. Wipe the exterior of the kettle and the base with a damp cloth. Do not immerse the base in water.

Placement

• Place the kettle base on a flat, stable, heat-resistant, and dry surface.
• Ensure the power cord is not dangling where it can be pulled or tripped over.
• Keep the kettle away from heat sources and direct sunlight.

4. Operating Instructions

Filling the Kettle

1. Remove the kettle from its base.
2. Open the lid.
3. Fill the kettle with fresh, cold water. Do not fill below the MIN mark or above the MAX mark (0.9L). Overfilling may cause boiling water to spill out.
4. Close the lid securely.
5. Place the kettle back onto its base.

Setting Temperature and Heating

Figure 2: Close-up of the kettle's control base, showing the digital display and temperature adjustment buttons.

1. Plug the power cord into a grounded wall outlet. The display will illuminate.
2. Use the + and - buttons on the base to adjust the desired target temperature. The temperature can be set in 1-degree increments.
3. Press the Power button (usually indicated by a power symbol) to start heating. The display will show the current water temperature and the set target temperature.
4. The kettle will automatically stop heating once the target temperature is reached. A beep will sound to indicate completion.

Temperature Hold Function

The kettle can maintain your desired temperature for up to 2 hours.

• After setting your desired temperature and starting the heating process, press the Hold Temp button (often indicated by a thermometer or hold symbol).
• The kettle will heat to the set temperature and then maintain it for 2 hours.
• To deactivate the hold function, press the Hold Temp button again or remove the kettle from the base.

Switching Between Fahrenheit and Celsius

To switch the temperature display unit:

• With the kettle on the base and powered on, press and hold the Temp button and the - button simultaneously for 3 seconds.
• The display will switch between °F and °C.

Using the Brew Stopwatch

Figure 3: The digital display showing the integrated brew timer function.

The built-in stopwatch helps time your pour-over brewing process.

• Once the water has reached your desired temperature, press the Timer button (often indicated by a clock symbol).
• The timer will start counting up on the display.
• Press the Timer button again to pause or reset the timer.

Pouring

Figure 4: Demonstrates the precise control offered by the gooseneck spout for pour-over coffee preparation.

The gooseneck spout is designed for controlled and even pouring. Lift the kettle from the base and pour slowly and steadily for optimal results, especially for pour-over coffee.

5. Care and Maintenance

Cleaning

• Always unplug the kettle and allow it to cool completely before cleaning.
• Exterior: Wipe the exterior of the kettle and the base with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Interior: The kettle interior is 100% stainless steel. For general cleaning, rinse with water. For stubborn stains or mineral deposits (limescale), use a descaling solution specifically designed for kettles or a mixture of white vinegar and water. Fill the kettle with the solution, let it sit for an hour (or boil if using vinegar), then rinse thoroughly several times.
• Do not immerse the power base or cord in water or any other liquid.
• This kettle is not dishwasher safe. Hand wash only.

Storage

When not in use, store the kettle in a dry place, away from direct sunlight and out of reach of children.

6. Troubleshooting

7. Specifications

8. Warranty and Support

Warranty Information

This intasting Gooseneck Electric Kettle comes with an 18-Month Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use.

The warranty does not cover:

• Damage caused by accident, misuse, abuse, or neglect.
• Damage from unauthorized repair or modification.
• Normal wear and tear.
• Damage from failure to follow operating instructions.

Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, concerns, or warranty claims, please contact our U.S. based customer support team. Refer to the warranty card included in your packaging for specific contact details or visit the official intasting website.

We are committed to providing lasting quality and support for your product.