OCOOPA UT4 Young+ & UT4 Extreme Rechargeable Hand Warmer User Manual

Introduction

Thank you for choosing the OCOOPA UT4 Young+ or UT4 Extreme Rechargeable Hand Warmer. These devices are designed to provide reliable and portable warmth in various conditions, featuring a durable, waterproof, and dustproof design, along with multiple heat settings and a magnetic attachment system for convenience. Please read this manual thoroughly to ensure safe and efficient operation of your hand warmer.

The OCOOPA UT4 hand warmer is built to withstand splashes, ensuring durability in various environments.

Product Features

• Durable Construction: Heavy-duty design for outdoor use.
• IP56 Waterproof & Dustproof: Provides protection against water splashes and dust ingress.
• Multiple Heat Modes: Includes a standard mode and an extra heat mode for rapid warming.
• High Capacity Battery: Equipped with a 10000mAh battery for extended warmth.
• Magnetic Design: Units can snap together for easy storage and portability.
• Compact and Portable: Slim and sleek design fits easily into gloves and pockets.

The OCOOPA UT4 series offers robust features for outdoor enthusiasts, including a large battery capacity and durable construction.

The OCOOPA UT4 hand warmer is significantly more compact than traditional disposable warmers, making it ideal for portability.

Setup

Charging the Device

1. Locate the charging port on your OCOOPA UT4 hand warmer.
2. Connect the provided USB charging cable to the hand warmer and a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
3. The indicator lights will illuminate to show charging status. A full charge is indicated when all lights are solid.
4. Allow for a full charge, indicated when all lights are solid.

Ensure the charging port is dry before connecting the cable to prevent damage.

Operating Instructions

Turning On/Off and Adjusting Heat Settings

1. To turn on the hand warmer, press and hold the power button for a few seconds until the indicator lights illuminate.
2. Press the power button briefly to cycle through the heat settings (Low, Medium, High). The number of illuminated indicator lights will correspond to the heat level.
3. For an extra burst of heat, activate the dedicated "Extra Heat Mode" button (if available on your model). This provides a rapid increase in heating rate.
4. To turn off the hand warmer, press and hold the power button again until the indicator lights turn off.

The Extra Heat Mode provides a significant boost in warmth when needed most.

Using the Magnetic Feature

The OCOOPA UT4 hand warmers feature a magnetic design, allowing two units to snap together. This is ideal for:

• Enhanced Warmth: Hold both units together for concentrated heat.
• Easy Storage: Keep both units securely together when not in use.
• Portability: Carry them as a single, compact unit.

The magnetic design allows for convenient pairing and storage of the hand warmers.

Optimal Placement for Warmth

For best results, place the hand warmer directly into your gloves or pockets. Its slim profile is designed to fit comfortably without bulging, allowing your hands to cup around the warmth effectively.

The slim design ensures the hand warmer fits discreetly and comfortably in gloves or pockets.

Enjoy long-lasting warmth with up to 8 hours of heat per unit.

Maintenance

• Cleaning: Wipe the surface of the hand warmer with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the hand warmer in a cool, dry place when not in use. Ensure it is fully charged before long-term storage to preserve battery life.
• Water Exposure: While IP56 rated, avoid prolonged submersion in water. Always ensure the charging port cover is securely closed when exposed to moisture.

The IP56 rating provides protection against water splashes and dust, making it suitable for rugged use.

Troubleshooting

Specifications

• Model: OCOOPA UT4 Young+ / UT4 Extreme
• Battery Capacity: 10000mAh (per unit, if applicable for Young+/Extreme distinction, otherwise total)
• Heat Settings: Low, Medium, High, Extra Heat Mode
• Waterproof Rating: IP56 (Splash and dust resistant)
• Charging Port: USB-C (Assumed, common for modern devices)
• Dimensions: Approximately 2.9 inches (height) x 1.8 inches (width) x 0.6 inches (thickness) per unit.
• Weight: Approximately 65g per single unit.

Warranty and Support

OCOOPA products are designed for durability and performance. For warranty information, product registration, or technical support, please visit the official OCOOPA website or contact their customer service team directly. Keep your purchase receipt as proof of purchase for warranty claims.

Official OCOOPA Store: Visit the OCOOPA Store on Amazon