ACTi A422 4MP Outdoor Network Bullet Camera User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ACTi A422 4MP Outdoor Network Bullet Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. The ACTi A422 is designed for secure monitoring of outdoor environments, featuring high-resolution video capture, night vision capabilities, and advanced analytics.

Safety Information

• Ensure all power connections comply with local electrical codes.
• Do not expose the camera to extreme temperatures or humidity beyond its specified operating conditions.
• Avoid direct exposure of the lens to strong light sources for extended periods.
• Only use accessories specified by the manufacturer.
• Disconnect power before performing any maintenance or installation procedures.
• The camera enclosure is IP68 and IK10 rated for outdoor use and vandalism resistance; however, avoid intentional physical damage.

Package Contents

Verify that all items are present in the package:

• ACTi A422 4MP Outdoor Network Bullet Camera (1 unit)
• Mounting Hardware (screws, anchors)
• Quick Start Guide
• Waterproof Connector Kit

Product Overview

The ACTi A422 is a robust bullet-style network camera designed for outdoor surveillance. It features a durable metal enclosure and advanced imaging capabilities.

Figure 1: ACTi A422 4MP Outdoor Network Bullet Camera. This image displays the white bullet camera with its integrated mounting bracket, showcasing the main camera body and the dark lens housing.

Key Components:

• Camera Lens: 2.7-13.5mm varifocal lens with 102.8 to 32.4° horizontal field of view.
• IR LEDs: Three infrared LEDs for night vision up to 279 feet.
• Mounting Bracket: Integrated for wall mounting.
• Ethernet Port: RJ-45 port for network and Power over Ethernet (PoE) connection.
• Audio Input/Output: For two-way audio communication.
• MicroSD Card Slot: Supports Kingston or SanDisk microSD cards up to 256GB for local storage.
• Reset Button: For factory reset.

Setup

1. Mounting the Camera

1. Choose a Location: Select a suitable wall or surface for mounting, ensuring a clear field of view and access to network cabling.
2. Drill Holes: Use the mounting template (if provided) to mark and drill pilot holes for the mounting screws.
3. Secure the Camera: Attach the camera's mounting bracket to the surface using the provided screws and anchors.
4. Adjust Angle: Loosen the adjustment screws on the bracket to position the camera for the desired viewing angle, then tighten securely.

2. Network and Power Connection

The ACTi A422 supports Power over Ethernet (PoE), simplifying installation by delivering both power and data through a single Ethernet cable.

1. Connect Ethernet Cable: Connect one end of an Ethernet cable to the camera's RJ-45 port. Use the waterproof connector kit for outdoor installations to protect the connection.
2. Connect to PoE Switch/Injector: Connect the other end of the Ethernet cable to a PoE-enabled network switch or a PoE injector.
3. Verify Connection: Once connected, the camera will power on and attempt to obtain an IP address from your network's DHCP server.

3. Initial Configuration

Access the camera's web interface for initial setup and configuration.

1. Discover Camera: Use ACTi's IP Utility software or a network scanner to find the camera's IP address on your network.
2. Access Web Interface: Open a web browser (Internet Explorer 11, Chrome, Edge, or Safari are compatible) and enter the camera's IP address in the address bar.
3. Login: Enter the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
4. Basic Settings: Configure network settings (if not using DHCP), date/time, and user accounts.

Operating the Camera

Video and Image Settings

• Resolution: The camera supports up to 2688 x 1520 resolution at 30 fps.
• Compression: Utilizes H.265 video compression for efficient storage and bandwidth usage.
• Image Enhancements: Adjust white balance, brightness, contrast, sharpness, saturation, backlight compensation (BLC), and strong light suppression (HLC) via the web interface. The camera also features 150 dB Wide Dynamic Range (WDR) and 2D-DNR/3D-DNR for clear images in challenging lighting.
• Corridor Mode: Supports 90, 180, and 270° rotation for optimized vertical viewing areas.
• Privacy Masking: Configure up to four configurable regions to mask out sensitive areas from surveillance.

Night Vision

The camera is equipped with three IR LEDs and an IR cut filter for automatic day/night switching, providing clear surveillance up to 279 feet in low-light or no-light conditions.

Deep Learning Analytics

The ACTi A422 includes built-in deep learning analytics for enhanced monitoring:

• Face Detection
• Tampering Detection
• Object-based Motion Detection
• Object Line Crossing Detection
• Object Enter Area Detection
• People Line Crossing Detection
• People Enter Area Detection
• Vehicle Line Crossing Detection
• Vehicle Enter Area Detection

These analytics can be configured to trigger alarms or recordings based on specific events within the camera's field of view.

Audio and Storage

• Two-Way Audio: Connect external microphone and speaker to enable two-way audio communication.
• Local Storage: Insert a Kingston or SanDisk microSD card (up to 256GB) into the onboard slot for local video recording.

System Integration

The camera is fully compatible with ACTi software and complies with ONVIF profiles G, M, S, and T, ensuring broad compatibility with various surveillance devices and Network Video Recorders (NVRs).

Maintenance

• Cleaning: Regularly clean the camera lens and housing with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Firmware Upgrades: Periodically check the ACTi website for firmware updates. Auto firmware upgrades are supported. Keeping the firmware updated ensures optimal performance and security.
• Cable Inspection: Periodically inspect all cables and connections for wear or damage, especially for outdoor installations.

Troubleshooting

Specifications

• Model: A422
• Image Sensor: 1/2.7" Progressive Scan CMOS
• Video Resolution: 2688 x 1520 (4MP) at 30 fps
• Lens: 2.7-13.5mm Varifocal
• Field of View (Horizontal): 102.8° to 32.4°
• Night Vision: 3 IR LEDs, up to 279 ft (85m)
• Minimum Illumination: 0.005 lux (color), 0 lux (IR on)
• Video Compression: H.265, H.264, MJPEG
• Audio: Two-way (input/output)
• Storage: MicroSD card slot (up to 256GB, Kingston/SanDisk recommended)
• Network Interface: RJ-45 Ethernet (10/100 Mbps)
• Power: Power over Ethernet (PoE)
• Ingress Protection: IP68-rated (Dust and Water Resistant)
• Vandal Resistance: IK10-rated
• Operating Temperature: -40°C to 60°C (-40°F to 140°F)
• Dimensions: 6.7 x 2.8 x 2.8 inches (170 x 71 x 71 mm)
• Weight: 1.2 pounds (0.54 kg)
• ONVIF Compliance: Profiles G, M, S, T
• Analytics: Face detection, tampering detection, object-based motion detection, object/people/vehicle line crossing/enter area detection.

Warranty and Support

For warranty information and technical support, please refer to the official ACTi website or contact your authorized ACTi dealer. Keep your purchase receipt as proof of purchase for warranty claims.