Introduction
Welcome to your new Feonase King Size Bed Frame. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your bed frame. Please read all instructions carefully before beginning assembly or use.
Important Safety Information
Failure to follow these safety guidelines may result in injury or damage to the product.
- Do not exceed the maximum weight capacity of 1000 lbs.
- Be cautious of sharp edges and keep fingers away from drawer openings during use.
- Follow assembly instructions carefully to prevent instability or collapse.
- Ensure all electrical connections for the charging station are properly secured and connected to a suitable power source.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 4" Storage Wingback Headboard x 1
- Bed Frame Components (Side Rails, Center Support, Legs)
- Wooden Slats
- Drawers with pulley and lock x 4
- Assembly Hardware (Bolts, Screws, Washers)
- Installation Tools (Hex Key, Wrench)
- Instruction Manual
Assembly Instructions
Assembly is recommended for two people and typically takes approximately 30 minutes. Follow these steps carefully.
Step 1: Prepare the Area and Unpack
Clear a spacious area for assembly. Unpack all components and lay them out, referring to the package contents list to ensure everything is present.
Step 2: Assemble the Main Frame
Connect the side rails and center support beams using the provided hardware. Ensure all bolts are finger-tightened initially, then fully tightened once the frame structure is complete.
Step 3: Install Wooden Slats
Place the wooden slats across the frame. The slats are designed with EVA foam covering and Velcro to minimize noise and secure them in place. Ensure each slat is properly seated and secured.
Step 4: Attach Headboard
Secure the upholstered wingback headboard to the main frame using the designated hardware. Ensure it is firmly attached and stable.
Step 5: Insert Storage Drawers
Position the four storage drawers under the bed frame. The integrated pulleys allow for smooth gliding, and clips help secure them in place when closed.
Operating Your Bed Frame
Using the Charging Station
The headboard is equipped with a convenient charging station featuring 2 AC outlets, 1 USB port, and 1 Type-C port. To use, ensure the bed frame's power cord is plugged into a functional wall outlet. You can then connect your electronic devices for charging.
Utilizing Storage Drawers
The four oversized drawers are designed for efficient under-bed storage. They feature integrated pulleys for smooth gliding and clips to secure them in place when closed. These drawers are suitable for storing clothing, shoes, bedding, and other personal items.
Care and Maintenance
- Regular Inspection: Periodically inspect all bolts and connections to ensure they remain tight. Tighten any loose hardware as necessary to maintain stability.
- Upholstery Cleaning: Clean the upholstered headboard and drawer fronts with a soft, damp cloth. For spills, blot immediately. Avoid using harsh chemicals or abrasive cleaners, which can damage the fabric.
- Frame Cleaning: For the metal frame, wipe with a dry or slightly damp cloth to remove dust and debris.
- Drawer Maintenance: Ensure drawers glide smoothly and are free of obstructions. Clean the wheels and tracks if necessary.
Troubleshooting
Squeaking Noises
If you experience squeaking, check all frame connections and slat placements. Ensure all bolts are tightened securely and that the wooden slats are properly seated. The EVA foam on the slats is designed to minimize noise, but loose connections can still cause sound.
Drawers Not Gliding Smoothly
Check for any obstructions under the bed or within the drawer mechanism. Ensure the pulleys are clean and functioning correctly. Verify that the drawers are properly aligned within their designated spaces.
Charging Station Not Working
Verify that the bed frame's main power cord is securely plugged into a functional wall outlet. Check for any loose connections at the charging ports on the headboard. If the issue persists, try plugging another device into the outlet to confirm power supply.
Product Specifications
| Size | King |
| Product Dimensions | 85.4"L x 79.4"W x 45.7"H |
| Special Features | No Box Spring Needed, Squeak Resistant, Storage Drawer, USB Port |
| Color | Black |
| Finish Type | Laminated |
| Included Components | 4" Storage Wingback Headboard x 1, Installation Tools & Accessories, Slats, With pulley and lock Drawer x 4 |
| Compatible Mattress Size | King (Recommended Mattress: 8"-12" thickness) |
| Brand | Feonase |
| Furniture Finish | Black |
| Assembly Required | Yes |
| Manufacturer | Feonase |
| Form Factor | Rectangular with Wingback Headboard |
| Item Weight | 132.3 pounds |
| Model Number | 840C5 |
| Weight Capacity | 1000 lbs |
Warranty and Customer Support
Warranty Information
For specific warranty details regarding your Feonase King Size Bed Frame, please refer to the documentation included with your purchase. This documentation outlines the terms and conditions of the product warranty.
Customer Support
If you encounter any issues, have questions, or require assistance with your Feonase bed frame, please contact our dedicated customer support team. You can find contact information in your product packaging or by visiting the official Feonase store.
Visit the Feonase Store on Amazon for additional product information and support resources.