1. Introduction
Figure 1.1: Angled front view of the Marantz Model 60n amplifier, highlighting its sleek design and controls.
The Marantz Model 60n is a high-performance Network Integrated Amplifier designed to deliver exceptional audio quality and versatile connectivity. It combines traditional Marantz sound engineering with modern network streaming capabilities, including HEOS Built-in, allowing access to a wide range of music services and multi-room audio. This manual provides detailed instructions for setting up, operating, and maintaining your Model 60n amplifier.
2. Safety Instructions
Please read these safety instructions carefully before operating the unit. Keep this manual for future reference.
- Ventilation: Ensure adequate space around the unit for proper ventilation to prevent overheating. Do not block ventilation openings.
- Power Source: Connect the unit only to the specified power supply voltage.
- Power Cord: Protect the power cord from being walked on or pinched. Do not pull the cord to disconnect from the outlet.
- Moisture: Do not expose the unit to rain or moisture. Do not place objects filled with liquids, such as vases, on the unit.
- Foreign Objects: Do not insert any foreign objects into the unit's openings.
- Servicing: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel.
- Cleaning: Unplug the unit from the power outlet before cleaning. Use a dry cloth only.
3. Package Contents
Verify that all items listed below are included in the package:
- Marantz Model 60n Network Integrated Amplifier
- Power Cord
- Remote Control (with 2 AA batteries)
- Bluetooth/Wi-Fi Antennas (x2)
- Quick Start Guide
- Safety Instructions
4. Product Overview
4.1 Front Panel
Figure 4.1: Front view of the Marantz Model 60n Network Integrated Amplifier, showing the central display, input selector, volume knob, tone controls, and power button.
- Power Button (⑂): Turns the unit on or off.
- Input Selector: Rotates to select the desired audio input source (e.g., CD, Phono, Network).
- Source Direct: Bypasses tone controls for a purer audio signal.
- Bass/Treble: Adjusts the low and high frequency response.
- Balance: Adjusts the left/right channel balance.
- Volume: Controls the overall output volume.
- Headphone Jack: For connecting headphones.
- Display: Shows current input, volume level, and network information.
4.2 Rear Panel
Figure 4.2: Rear view of the Marantz Model 60n Network Integrated Amplifier, displaying various input and output terminals including speaker terminals, HDMI ARC, network port, and analog inputs.
- Bluetooth/Wi-Fi Antennas: Connect the included antennas for wireless connectivity.
- 5V/1A USB: For firmware updates or powering small USB devices.
- Network Port: For wired Ethernet connection.
- HDMI ARC: Audio Return Channel for TV audio.
- Coaxial/Optical Digital Inputs: For connecting digital audio sources.
- Phono Input (MM): For connecting a turntable with a Moving Magnet cartridge. Includes a ground terminal.
- Analog Inputs (CD, Line 1, Line 2): For connecting analog audio sources.
- Subwoofer Pre-Out: For connecting an active subwoofer.
- Remote Control (IN/OUT): For integration with external control systems.
- Speaker Terminals: Connect your passive speakers (4-16 ohms impedance).
- AC IN: Power cord connection.
5. Setup
5.1 Placement
Place the Model 60n on a flat, stable surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight. Ensure there is at least 4 inches (10 cm) of space above and around the unit for proper airflow.
5.2 Connecting Speakers
Connect your passive speakers to the speaker terminals on the rear panel. Observe correct polarity (+ to + and - to -) for each speaker. The Model 60n supports speakers with an impedance of 4-16 ohms.
- Twist the speaker terminal knob counter-clockwise to loosen.
- Insert the bare wire or banana plug into the terminal.
- Twist the knob clockwise to tighten and secure the connection.
5.3 Connecting Audio Sources
- CD Player/Analog Sources: Use RCA cables to connect your CD player or other analog devices to the CD, Line 1, or Line 2 inputs.
- Turntable: Connect your turntable to the PHONO input. Ensure your turntable has a Moving Magnet (MM) cartridge. Connect the turntable's ground wire to the GND terminal on the amplifier.
- Digital Sources: Use optical or coaxial digital cables to connect devices like a TV, Blu-ray player, or game console to the DIGITAL AUDIO IN (OPTICAL/COAXIAL) ports.
- TV (HDMI ARC): Connect an HDMI cable from your TV's HDMI ARC port to the HDMI ARC port on the Model 60n. This allows audio from your TV to be sent to the amplifier.
- Subwoofer: Connect an active subwoofer to the SUBWOOFER PRE-OUT using an RCA cable.
5.4 Network Connection
- Wireless (Wi-Fi): Attach the two included Wi-Fi/Bluetooth antennas to the rear panel. The unit will guide you through Wi-Fi setup during initial configuration.
- Wired (Ethernet): Connect an Ethernet cable from your router to the NETWORK port on the rear panel.
5.5 Power Connection
After all audio and network connections are made, connect the supplied power cord to the AC IN terminal on the rear panel and then to a wall outlet.
5.6 Initial Setup Wizard
Upon first power-on, the Model 60n will guide you through an initial setup process on its front display. Follow the on-screen instructions to configure network settings, language, and other basic preferences.
6. Operating Instructions
6.1 Basic Operation
- Power On/Off: Press the power button (⑂) on the front panel or remote control.
- Input Selection: Rotate the Input selector knob on the front panel or use the input buttons on the remote control to choose your desired audio source.
- Volume Control: Rotate the Volume knob on the front panel or use the VOLUME +/- buttons on the remote control.
- Tone Controls: Use the BASS, TREBLE, and BALANCE knobs to adjust the sound to your preference.
- Source Direct: Press the SOURCE DIRECT button to bypass the tone control circuits for a more direct and uncolored sound. Press again to re-engage tone controls.
- Headphone Use: Plug headphones into the front panel headphone jack. Speaker output will automatically mute.
6.2 Network Features and HEOS
The Model 60n features HEOS Built-in, allowing you to stream music from various online services, network-attached storage (NAS), and other HEOS-enabled devices. To utilize these features:
- Download the HEOS App on your smartphone or tablet (available on iOS App Store and Google Play Store).
- Ensure your Model 60n is connected to your home network (Wi-Fi or Ethernet).
- Follow the instructions in the HEOS App to add your Model 60n to your HEOS system.
- Once added, you can browse and play music from streaming services (e.g., Spotify, Tidal, Amazon Music), internet radio, or your local music library.
The HEOS app also allows for multi-room audio, enabling you to group multiple HEOS devices to play the same music simultaneously or different music in different rooms.
7. Maintenance
- Cleaning: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, waxes, or solvents.
- Ventilation: Regularly check that the ventilation openings are not blocked by dust or debris.
- Power Cord: Inspect the power cord periodically for any damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power outlet faulty; Unit in standby mode. | Ensure power cord is securely connected. Try a different outlet. Press the power button to turn on. |
| No sound | Incorrect input selected; Volume too low; Speakers not connected properly; Mute function active. | Select correct input. Increase volume. Check speaker connections and polarity. Deactivate mute. |
| Poor sound quality | Source Direct enabled; Incorrect speaker impedance; Poor cable connections. | Disable Source Direct if tone adjustments are desired. Ensure speakers match impedance. Check all cable connections. |
| Network connection issues | Wi-Fi signal weak; Router issues; Incorrect network settings. | Move unit closer to router or use wired connection. Restart router. Re-run network setup via HEOS app. |
9. Specifications
- Model: Marantz Model 60n
- Output Power: 60 Watts x 2 (8 ohms, 20 Hz - 20 kHz, 0.07% THD)
- Speaker Impedance: 4 - 16 ohms
- Connectivity: Wi-Fi, Bluetooth, Ethernet, HDMI ARC, Optical, Coaxial, RCA Analog (CD, Line 1, Line 2), Phono (MM), USB
- Streaming Services: HEOS Built-in (Spotify, Tidal, Amazon Music, etc.)
- Dimensions (W x H x D): Approximately 17.3 x 5.1 x 17.4 inches (442 x 130 x 444 mm)
- Weight: 35 pounds (15.9 kg)
- Batteries for Remote: 2 AA batteries
- Date First Available: September 10, 2024
- Manufacturer: Marantz
10. Warranty and Support
Marantz products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Marantz website. For technical support, troubleshooting assistance, or service inquiries, please contact Marantz customer support or your authorized dealer.
Marantz Official Website: www.marantz.com
