COSTWAY Vanity Desk with Lights and Cushioned Stool User Manual

1. Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your COSTWAY Vanity Desk with Lights and Cushioned Stool. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Figure 1.1: The COSTWAY Vanity Desk with Lights and Cushioned Stool.

2. Safety Information

Observe the following safety guidelines to prevent injury or damage to the product:

• Always assemble the vanity according to the provided instructions.
• Use caution when moving the vanity due to its weight and height.
• Keep the vanity away from heat sources and moisture.
• Do not attempt to repair or modify the electrical components.
• Always turn off the power before cleaning the vanity.
• Keep the vanity stable and secure to prevent tipping.
• Do not place heavy objects on the vanity that could cause it to tip over.

Figure 2.1: Illustration of the anti-tipping device. Attach the table to the wall to improve safety.

3. Package Contents

Verify that all components are present before beginning assembly:

• 1 x Vanity Desk
• 1 x Vanity Stool
• 1 x User Manual
• Hardware Pack (screws, tools, etc.)

4. Assembly Instructions

Follow these steps for proper assembly. Refer to the included detailed assembly diagram for visual guidance.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify all components against the package contents list.
2. Assemble Desk Base: Attach the four pine wood legs to the main desk tabletop using the provided hardware. Ensure all connections are secure.
3. Assemble Stool: Attach the legs to the cushioned stool seat using the provided hardware.
4. Install Mirror Unit: The mirror unit, including the LED mirror and tabletop drawers, is designed to be detachable. Place this unit securely onto the main desk tabletop.
5. Secure Anti-Tipping Device: For safety, attach the anti-tipping device to the back of the vanity desk and secure it to a wall stud.

Figure 4.1: The 2-in-1 design allows the mirror unit to be detached, converting the vanity into a writing desk.

Figure 4.2: Overview of storage options including an open shelf, two tabletop drawers, and two larger drawers.

Figure 4.3: Key features including the 360° rotatable mirror, exquisite drawer handles, solid wood legs, and non-slip foot pads.

5. Operating Instructions

5.1. LED Mirror Operation

The vanity mirror is equipped with 10 LED bulbs offering adjustable lighting modes and brightness.

• Power On/Off: Press the power button on the controller to turn the LED lights on or off.
• Change Light Mode: Short press the controller button to cycle through the three available light modes: Warm Yellow, Warm White, and Cool White.
• Adjust Brightness: Long press the controller button to smoothly adjust the brightness level of the lights. Release the button when the desired brightness is achieved.

Figure 5.1: The LED mirror offers three light modes and adjustable brightness via a touch controller.

5.2. Mirror Rotation

The mirror features a 360° rotatable design, allowing you to adjust it to your preferred angle for optimal viewing.

6. Care and Maintenance

To maintain the appearance and longevity of your vanity desk, follow these care instructions:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish. For the mirror, use a glass cleaner and a lint-free cloth.
• Dusting: Regularly dust the vanity with a dry, soft cloth.
• Spills: Clean up spills immediately to prevent staining or damage to the wood.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration.
• Check Connections: Periodically check and tighten all screws and fasteners to ensure stability.

7. Troubleshooting

If you encounter issues with your vanity desk, refer to the following common problems and solutions:

• LED Lights Not Working:
  • Ensure the power adapter is securely plugged into both the vanity and a working electrical outlet.
  • Check if the power button on the controller has been pressed.
  • Verify there are no visible damages to the power cord or controller.
• Vanity Feels Unstable:
  • Ensure all assembly screws are tightened.
  • Confirm the anti-tipping device is properly installed and secured to the wall.
  • Place the vanity on a flat, level surface.
• Drawers Do Not Slide Smoothly:
  • Check for any obstructions in the drawer slides.
  • Ensure the drawers are correctly aligned within their tracks.

8. Product Specifications

Figure 8.1: Detailed dimensions of the vanity desk and stool.

9. Warranty and Customer Support

For warranty information, missing parts, or any questions regarding your COSTWAY Vanity Desk, please contact COSTWAY customer support. Refer to the contact information provided with your purchase or visit the official COSTWAY website for assistance.