1. Introduction
The LOKITHOR JT400 is a versatile 2-in-1 device designed for automotive emergency situations. It functions as both a powerful jump starter and a comprehensive 12V battery tester. This manual provides essential instructions for safe and effective use, ensuring optimal performance and longevity of your device.
With a peak starting current of 2500 Amps, the JT400 is suitable for 12V vehicles with gasoline engines up to 8.5 liters and diesel engines up to 6.5 liters. Its integrated battery testing capabilities allow for real-time monitoring of battery health, cranking performance, and charging status via a mobile application.

Image 1.1: LOKITHOR JT400 device shown alongside a smartphone displaying the battery testing app interface.
2. Important Safety Information
Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
General Safety Precautions:
- Keep the device away from children.
- Do not expose the device to rain or wet conditions.
- Do not operate the device if it has been damaged or modified.
- Ensure proper ventilation during use and charging.
- Wear eye protection when working with batteries.
- Do not short-circuit the jump starter clamps.
- Do not attempt to jump start a frozen battery.
- Always ensure the product has more than 50% battery power for a reliable boost.
Integrated Safety Features:
The LOKITHOR JT400 is equipped with an integrated Battery Management System (BMS) and smart self-identifying clips to ensure maximum safety during operation. These features provide:
- Spark-Proof Protection: Prevents sparks during connection.
- Reverse-Polarity Protection: Alerts and protects against incorrect connections.
- Over-Charge Protection: Prevents overcharging of the internal battery.
- Over-Current Protection: Safeguards against excessive current flow.
- Short-Circuit Protection: Automatically shuts off in case of a short circuit.
- Reverse-Charge Protection: Prevents current flow back into the jump starter from the vehicle battery.
- Low-Temperature Protection: Ensures safe operation in cold conditions.
- High-Temperature Protection: Prevents overheating of the device.
- Over-Voltage Protection: Protects against voltage spikes.
- Over-Load Protection: Prevents damage from excessive load.

Image 2.1: Visual representation of the 10 safety protection technologies integrated into the JT400.
3. Package Contents
Verify that all items are present in the package:
- LOKITHOR JT400 Portable Lithium Jump Starter & Battery Tester
- Smart Jumper Cables
- User Manual
- USB-A to USB-C Cable
- Accessories Storage Bag

Image 3.1: All items included in the LOKITHOR JT400 product package.
4. Setup
4.1 Charging the JT400
Before first use, fully charge the LOKITHOR JT400. Use the provided USB-A to USB-C cable and a compatible USB charger (not included). The device features USB-C input for charging.
- Connect the USB-C end of the cable to the JT400's input port.
- Connect the USB-A end to a power adapter.
- The display will indicate charging status.
For optimal performance, ensure the JT400 is charged above 50% before attempting to jump start a vehicle.
4.2 Connecting to the BattGuard App (Bluetooth)
The JT400 features Bluetooth 5.3 for real-time battery monitoring via the BattGuard mobile app. The app supports English, German, French, Italian, Spanish, and Russian.
- Download the BattGuard App: Search for "BattGuard" on the App Store (iOS) or Google Play Store (Android) and install it on your smartphone.
- Open the App and Connect: Launch the BattGuard app. Ensure Bluetooth is enabled on your phone. The app will search for nearby devices. Select "JT400" to connect.
- Begin Testing: Once connected, attach the jump clamps to the vehicle battery to initiate testing functions within the app.

Image 4.1: Instructions for downloading the BattGuard app and connecting to the JT400 via Bluetooth.
5. Operating Instructions
5.1 Jump Starting a Vehicle
The JT400 can jump start 12V vehicles with up to 8.5L gas and 6.5L diesel engines. Ensure the JT400 is charged above 50%.
- Connect Clamps: Attach the red (+) clamp to the positive terminal of the vehicle battery and the black (-) clamp to the negative terminal. The smart clamps feature "ConnectMax Technology" to detect optimal connection impedance.
- Power On: Turn on the LOKITHOR JT400. The device will perform a self-check.
- Start Vehicle: Once the device indicates it's ready (usually a solid green light or specific display message), start your vehicle.
- Disconnect: After the vehicle starts, disconnect the clamps from the vehicle battery, first the black (-) clamp, then the red (+) clamp.

Image 5.1: The JT400 connected to a vehicle battery for jump starting.
5.2 Battery Testing Functions
The JT400 can test 12V lead-acid batteries (Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB) with CCA ratings from 100-2000. Connect the JT400 to the BattGuard app via Bluetooth for detailed results.
- Connect to Battery: Attach the red (+) clamp to the positive terminal and the black (-) clamp to the negative terminal of the 12V vehicle battery.
- Open BattGuard App: Ensure the app is connected to the JT400 via Bluetooth.
- Select Test: Choose from the following tests within the app:
- Battery Health Test: Accurately measures charge level and battery status, detects issues, and predicts remaining lifespan. Provides SOH (State of Health) and SOC (State of Charge).
- Cranking Test: Monitors voltage and instant power to assess battery start-up performance. Helps prevent starting issues.
- Charging Test: Monitors charging status to detect undercharging, overcharging, or inefficiencies.
- Real-Time Voltage Monitoring: Provides continuous monitoring of battery voltage.

Image 5.2: The JT400 conducting a battery test, showing detailed results on the connected mobile app.

Image 5.3: The JT400 performing a cranking test, displaying voltage readings and performance status.

Image 5.4: The JT400 conducting a charging test, showing voltage fluctuations and charging status.
5.3 Portable Power Bank Functionality
The JT400 can also serve as a portable power bank to recharge smartphones, tablets, and other USB-powered devices.
- The device features USB-C output (5V/3A) and USB-A output (5V/3A).
- Connect your device to the appropriate USB port on the JT400 using a compatible charging cable.

Image 5.5: The JT400 being used to charge a smartphone, highlighting its portable power bank capability.
5.4 LED Flashlight
The built-in LED flashlight offers multiple modes for various situations:
- 100% Brightness
- 50% Brightness
- 10% Brightness
- Blink Mode
- SOS Mode
- Strobe Mode
Press the flashlight button to cycle through the modes. This feature is useful for emergencies, camping, or general illumination.

Image 5.6: The JT400's multi-purpose LED flashlight in operation.
6. Maintenance
6.1 Charging and Storage
- Recharge the JT400 after each use, especially after jump starting a vehicle.
- For long-term storage, charge the device to approximately 75% every 3-6 months to maintain battery health.
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures (-4°F to 140°F operating range).
- The JT400 has an ultra-long standby time of up to 24 months when fully charged, with a self-discharge rate of only 0.35mAh.

Image 6.1: The JT400 stored in a vehicle, emphasizing its long standby capability.
6.2 Cleaning
- Wipe the device with a dry, soft cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Keep the ports free from dust and debris.
7. Troubleshooting
If you encounter issues with your LOKITHOR JT400, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the JT400 fully. |
| Vehicle does not jump start. | JT400 battery level too low (<50%). Poor connection to vehicle battery. Vehicle battery is severely damaged. | Ensure JT400 is charged above 50%. Check clamp connections; ensure they are clean and secure. The "ConnectMax Technology" helps optimize this. Consult a professional mechanic. |
| Bluetooth app connection fails. | Bluetooth not enabled on phone. App permissions not granted. Device out of range. | Enable Bluetooth on your smartphone. Check app settings to ensure Bluetooth permissions are granted. Bring the phone closer to the JT400. |
| Error message on display. | Safety protection activated (e.g., reverse polarity, short circuit). | Refer to the specific error code in the full user manual or contact customer support. Disconnect and re-connect clamps carefully. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | LOKITHOR |
| Model | JT400 |
| Peak Output Current | 2500 Amps |
| Vehicle Compatibility | 12V vehicles, up to 8.5L Gas, 6.5L Diesel Engines |
| Battery Type | Lithium Polymer (internal) |
| Battery Test Range | 100-2000 CCA |
| Supported Battery Types | Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB |
| Connectivity | Bluetooth 5.3 (for BattGuard App) |
| USB-C Input | 5V/3A |
| USB-A Output | 5V/3A |
| USB-C Output | 5V/3A |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Product Dimensions | 3.46"D x 6.92"W x 1.73"H |
| Item Weight | 450 Grams (0.99 lbs) |
9. Warranty and Support
9.1 Warranty Information
The LOKITHOR JT400 comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by misuse, unauthorized modification, accident, or neglect.
9.2 Customer Support
For any questions, technical assistance, or warranty inquiries, please contact LOKITHOR customer service. We offer 7x24 customer service to assist you.
Contact information can typically be found on the official LOKITHOR website or through the retailer where the product was purchased.