mooas Cosy Fabric LED Desk Clock User Manual

1. Introduction

Thank you for choosing the mooas Cosy Fabric LED Desk Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new digital alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

Image: The mooas Cosy Fabric LED Desk Clock, Ash Pink variant, displaying the time 12:45.

2. Key Features

• Time, Date, and Temperature Display: Clearly shows current time, date, and ambient temperature.
• 12/24-Hour Mode: Easily switch between standard 12-hour and military 24-hour time formats.
• Night Mode & Power-Saving Mode: Automatically adjusts display brightness for comfortable viewing and energy efficiency.
• Alarm & Snooze Functions: Set multiple alarms with snooze capability and various repeat options (weekday, Mon-Sat, daily).
• Excellent LED Visibility: Bright and clear LED display for easy readability.
• Cosy Fabric Design: Features a unique fabric material for an aesthetically pleasing and cozy atmosphere.
• Non-Slip Silicone Pad: Ensures stability on various surfaces.
• USB Charging Port: Conveniently charge your devices directly from the clock.

Image: Visual representation of the clock's features and included components.

3. Setup

3.1 Power Connection

1. Connect the provided Type-C USB cable to the power input port on the back of the clock.
2. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port.
3. The clock will automatically power on and enter time display mode.

3.2 Battery Backup (Optional)

For backup functionality during power outages, insert 3 AAA batteries (not included) into the battery compartment on the back of the clock. These batteries will retain time and alarm settings but will not power the display continuously.

4. Operating Instructions

4.1 Time Setting

Image: A visual guide to setting the time, including 12/24-hour format, hour, and minute adjustments.

1. When powered on, the device automatically enters time display mode.
2. Press and hold the MODE button on the top of the device for 2 seconds to start setting the time.
3. Press the +/- buttons to set the desired mode (12/24-hour) and time (hour, minute).
4. After setting each value, press the MODE button to move to the next step.
5. If no button is pressed for 10 seconds, the settings will be saved, and the process will end.

4.2 Date Setting

Image: A visual guide to setting the date, including year, month, and day adjustments.

1. Press the MODE button once to switch to the date display mode.
2. In the date display mode, press and hold the MODE button for 2 seconds to start setting the date.
3. Press the +/- buttons to set the values (year, month, day).
4. Then press the MODE button to move to the next step.
5. Tip: Press and hold the +/- button for more than 3 seconds to scroll through the numbers continuously.
6. The initial setting date is January 1, 2024. The date can be set up to December 31, 2099.

4.3 Alarm Setting

Image: A visual guide to setting the alarm time, snooze duration, and repeat options.

1. In Alarm mode, press and hold the ALARM button for 3 seconds to start setting the alarm.
2. After setting the alarm time (24-hour/12-hour), snooze time (hours - minutes), and repeat options (1-7 for daily, 1-6 for Mon-Sat, or 1-5 for weekday), press the ALARM button to proceed to the next step.
3. If no button is pressed for 10 seconds, the setting will be saved.
4. When the alarm time arrives, it will sound with a "beep-beep" and gradually get faster.
5. Press any button except the SNOOZE button to stop the alarm. If there is no action, the alarm will automatically turn off after 1 minute.

4.4 Brightness Control

Image: The clock demonstrating two brightness levels for optimal viewing.

You can adjust the display brightness to your preference. Press the "+" button on the top of the clock to cycle through available brightness levels. Note that when setting the time or alarm, the brightness cannot be adjusted, and the default brightness is set to the maximum level.

4.5 Night Mode

Image: The clock displaying time in a low-light setting, indicating Night Mode is active.

The LED clock features a Night Mode that automatically adjusts the display to the lowest brightness during a specified time period. This helps with sleep and saves power.

1. In time display mode, press the MODE button three times to display whether Night Mode is activated (ON/OFF).
2. Press the +/- buttons to activate or deactivate Night Mode.
3. The default setting for Night Mode is OFF.

4.6 Cycle Display Mode

Image: Three clocks showing the cyclical display of time, date, and temperature.

The clock can display the time, date, and temperature in a continuous cycle.

• The time is displayed for 10 seconds.
• The date and temperature are displayed for 3 seconds each.

To activate Cycle Display Mode:

1. In temperature display mode, press and hold the MODE button for about 2 seconds.
2. When you hear a 'beep', it will switch to the cycle display mode.

To exit Cycle Display Mode: While in temperature display mode, press and hold the MODE button for about 2 seconds.

4.7 Temperature Display Mode

Image: A hand interacting with the clock, which displays the temperature.

The surrounding temperature is automatically recalibrated every 60 seconds.

1. In time display mode, press the MODE button twice to display the measured temperature.
2. The normal measurement range is -50°F to 122°F.

5. Maintenance

5.1 Cleaning

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the fabric or display.

5.2 Battery Replacement

If you are using the battery backup feature, replace the 3 AAA batteries when the display starts to flicker or when the clock fails to retain settings during a power interruption. Ensure correct polarity when inserting new batteries.

6. Troubleshooting

• Clock display is too bright/dim: Use the "+" button to adjust the brightness levels. Consider activating Night Mode for automatic dimming during specific hours.
• Clock not displaying on battery power: The clock requires continuous USB power for its main display. Batteries are for backup only to preserve settings during power outages, not for continuous display operation.
• Time/Date is incorrect: Follow the instructions in sections 4.1 and 4.2 to manually set the correct time and date.
• Alarm not sounding: Ensure the alarm is set correctly and enabled (check alarm icon on display). Verify the alarm volume setting.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or any inquiries regarding your mooas Cosy Fabric LED Desk Clock, please contact mooas customer service through the official website or your retailer's support channels. Please retain your proof of purchase for warranty claims.