lulunemo Hook On Chair with Removable Dining Tray

lulunemo Hook On Chair with Removable Dining Tray User Manual

Model: Hook On Chair with Removable Dining Tray

Introduction

Thank you for choosing the lulunemo Hook On Chair with Removable Dining Tray. This manual provides essential information for the safe and proper assembly, use, maintenance, and care of your product. Please read all instructions carefully before use and retain this manual for future reference.

Important Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

Always secure your child in the restraint system.
Never leave child unattended.
This product is intended for children who can sit upright unassisted and weigh up to 15 kg (33 pounds).
Ensure the chair is securely attached to the table before placing the child in it.
Do not use on glass table tops, loose table tops, single pedestal tables, table cloths or placemats, table leafs, or card tables.
Ensure the table thickness is between 0.8 inches (20mm) and 3.3 inches (85mm).
Regularly check all parts for wear, damage, or missing components. Discontinue use if any part is damaged.

Diagram showing types of tables not suitable for the hook-on chair — Figure 1: Types of tables not suitable for use with the hook-on chair, including glass, loose, single pedestal, table cloths, table leafs, and card tables.

Figure 2: Visual guide for table compatibility, showing correct and incorrect table edge profiles for secure attachment.

Diagram showing acceptable table thickness range for the hook-on chair — Figure 3: The chair is compatible with table thicknesses between 0.8 inches and 3.3 inches (20-85 mm).

Image demonstrating table thickness compatibility for the hook-on chair — Figure 4: The chair securely attaches to tables with a thickness up to 3.3 inches.

Image showing the weight capacity and dimensions of the hook-on chair — Figure 5: The chair has a maximum weight capacity of 15 kg (33 pounds) and approximate dimensions of 12.2 x 12.2 x 16.5 inches.

Parts List

Before assembly, ensure all parts are present and undamaged:

Hook On Chair Unit (fabric seat with integrated frame and clamps)
Removable Dining Tray
Storage Bag

Setup and Installation

Follow these steps to securely attach the hook-on chair to a table:

Prepare the Chair: Unfold the chair unit. Ensure the metal clamps are in the open position.
Position on Table: Place the chair on the table edge, ensuring the non-slip serrated pads are flush with the table surface and the clamps are positioned underneath.
Secure the Clamps: Rotate the clamp handles to tighten the chair firmly onto the table. Ensure both clamps are equally tight and the chair does not wobble. The table thickness must be between 0.8 inches and 3.3 inches.
Attach Dining Tray: Slide the removable dining tray onto the designated slots on the chair's arms until it clicks securely into place.
Verify Security: Before placing your child in the chair, always push down and pull up on the chair to confirm it is stable and securely attached to the table.

Diagram showing one-step installation process of the hook-on chair — Figure 6: Illustration of the one-step installation process, highlighting the non-slip serrated clamp and tightening mechanism.

Close-up of the non-slip serrated clamp mechanism — Figure 7: Detail of the non-slip serrated clamp designed for firm attachment to the table.

Image showing the sturdy metal clamps of the hook-on chair — Figure 8: The durable metal clamps provide secure support for the child in the hook-on chair.

Operating Instructions

Securing Your Child

The chair features a 3-point safety harness to keep your child secure:

Place your child in the seat.
Bring the waist straps around your child's waist and connect them to the crotch strap buckle.
Adjust the straps to ensure a snug but comfortable fit.
Always ensure the harness is properly fastened and adjusted before use.

Diagram of the three-point safety harness system — Figure 9: The three-point safety harness system ensures your child is securely fastened in the chair.

Using the Removable Dining Tray

To attach: Align the tray with the slots on the chair arms and push down until it locks into place.
To remove: Press the release tabs (if present) or lift the tray firmly upwards from the slots.

lulunemo Hook On Chair with Removable Dining Tray attached to a table — Figure 10: The lulunemo Hook On Chair with its removable dining tray securely attached to a table.

Baby sitting in the hook-on chair with dining tray, being fed by an adult — Figure 11: A child comfortably seated in the hook-on chair with the dining tray in use.

Maintenance and Cleaning

Fabric Seat Cover and Cushion

The removable seat cover and cushion are designed for easy cleaning:

Remove the fabric seat cover and cushion from the chair frame.
Machine wash in cold water on a gentle cycle.
Do not bleach.
Tumble dry on low heat or air dry.
Ensure all fabric components are completely dry before reattaching to the frame.

Dining Tray and Frame

Wipe the dining tray and metal frame with a damp cloth and mild soap.
Rinse thoroughly and dry completely.
Avoid abrasive cleaners or solvents.

Storage and Portability

The lulunemo Hook On Chair is designed for convenient storage and travel:

Remove the dining tray.
Loosen the clamps and detach the chair from the table.
Fold the chair unit flat.
Place the folded chair and dining tray into the provided storage bag.

Diagram showing how to fold and pack the hook-on chair into its storage bag — Figure 12: The chair folds flat and fits into the included storage bag for easy transport and storage.

Image showing the storage pocket on the back of the hook-on chair — Figure 13: The integrated storage pocket on the back of the seat is useful for small items like bottles or toys.

Troubleshooting

Problem	Possible Cause	Solution
Chair feels unstable or wobbly.	Clamps not tightened sufficiently or unevenly. Table surface is unsuitable.	Ensure both clamps are tightened firmly and evenly. Verify table compatibility and thickness (0.8-3.3 inches).
Cannot attach chair to table.	Table thickness is outside the acceptable range (0.8-3.3 inches). Table type is unsuitable.	Check table thickness. Refer to "Important Safety Information" for unsuitable table types.
Harness is too tight or too loose.	Straps are not adjusted correctly.	Adjust the harness straps to achieve a snug and secure fit for your child.

Specifications

Brand: lulunemo
Model: Hook On Chair with Removable Dining Tray
Maximum Weight Recommendation: 15 kg (33 pounds)
Product Dimensions: Approximately 12 x 12 x 16 inches (30.5 x 30.5 x 40.6 cm)
Item Weight: Approximately 4 pounds (1.8 kg)
Material Type: Aluminum (frame), Polyester (fabric)
Table Thickness Compatibility: 0.8 inches (20mm) to 3.3 inches (85mm)
Portability: Yes, foldable with included storage bag

Warranty and Support

This lulunemo Hook On Chair comes with a one-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For support, questions, or warranty claims, please contact lulunemo customer service through the retailer where the product was purchased or visit the official lulunemo store page on Amazon: lulunemo Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.