Nathan James Beacon Bohemian Boucle Bar Stool Instruction Manual

Introduction

This manual provides essential information for the assembly, use, and maintenance of your Nathan James Beacon Bohemian Boucle Bar Stool. Please read these instructions carefully before assembly and retain for future reference.

Safety Information

• Maximum Weight Recommendation: Do not exceed 250 pounds (113 kg) on the stool.
• Stability: Ensure all components are securely fastened before use to prevent instability.
• Intended Use: This product is designed for residential use only. It is not recommended for commercial use.

Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged.

• Stool Components (Wood frame, woven seagrass back, boucle upholstered seat)
• Hardware (Screws, Allen wrench, etc.)

Materials: Natural Woven Seagrass, Boucle Upholstery Fabric, Rubberwood, Plywood, Foam Seat.

Setup and Assembly Instructions

Assembly is estimated to take approximately 20 minutes. A packaging carton can be used as a working surface to protect components during assembly.

1. Unpack Components: Carefully remove all parts from the packaging. Verify all components are present against the parts list.
2. Identify Parts: Familiarize yourself with the different parts of the stool, including the legs, seat frame, and backrest. Pay close attention to the orientation of each piece as indicated in the diagrams.
3. Attach Legs to Seat Frame: Securely attach the legs to the seat frame using the provided hardware. Ensure all screws are tightened evenly. Crucial: Ensure the footrest bars are oriented correctly. Incorrect orientation can lead to uneven stool height.
4. Attach Backrest: Fasten the woven seagrass backrest to the assembled seat and leg frame.
5. Final Tightening: Once all components are loosely assembled, place the stool on a flat surface and apply gentle downward pressure to ensure all legs are evenly touching the floor. Then, fully tighten all screws.

Image: Front view of the assembled Nathan James Beacon Bar Stool, showing overall dimensions.

Image: Side view of the assembled Nathan James Beacon Bar Stool, showing overall dimensions.

Image: Back view of the assembled Nathan James Beacon Bar Stool, highlighting the woven seagrass backrest.

Image: Detailed view of the stool, illustrating the boucle fabric cushion, 24.5" seat height, 300 lb. weight limit, solid wood frame, counter height design, and woven black seagrass back.

Operating Instructions

The Nathan James Beacon Bar Stool is designed for comfortable seating at counter-height surfaces. Ensure the stool is placed on a flat, stable surface before use. Avoid standing on the stool or using it as a ladder.

Maintenance

• Cleaning: Wipe the wood frame with a dry cloth. For the boucle upholstery, spot clean with a mild detergent and damp cloth as needed. Avoid harsh chemicals.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Protection: Avoid prolonged exposure to direct sunlight or excessive moisture to preserve the wood and seagrass materials.

Troubleshooting

Uneven Stool After Assembly

If your stool appears uneven or wobbly after assembly, it is likely due to the footrest bars being installed in the incorrect direction. The instructions emphasize the importance of correct orientation for these bars. Disassemble the affected section, carefully re-read the instructions for footrest bar placement, and reassemble, ensuring the correct direction is followed. Then, place the stool on a flat surface and tighten all screws evenly.

Specifications

Warranty and Support

Your Nathan James Beacon Bar Stool comes with a lifetime manufacturer warranty. For any quality issues or support needs, please contact Nathan James customer service. Refer to the product packaging or the official Nathan James website for contact details.

For more information, visit the official Nathan James Store.