GoPro HERO13 Black Creator Edition

Download PDF
Contents

GoPro HERO13 Black Creator Edition Instruction Manual

Model: CHDFB-131CN_EDI_1

Introduction

This manual provides essential information for setting up, operating, and maintaining your GoPro HERO13 Black Creator Edition. This kit includes the HERO13 Black camera, Volta (Battery Grip, Tripod, Remote), Media Mod, Light Mod, an Enduro Battery, and a comprehensive accessory bundle. Please read these instructions carefully before use to ensure optimal performance and longevity of your device.

GoPro HERO13 Black Creator Edition with Volta, Media Mod, and Light Mod

Image: The GoPro HERO13 Black Creator Edition kit, showcasing the camera, Volta grip, Media Mod, and Light Mod.

What's Included

Your GoPro HERO13 Black Creator Edition package contains the following items:

  • GoPro HERO13 Black Camera
  • GoPro Enduro Rechargeable Li-Ion Battery
  • Curved Adhesive Mount
  • Mounting Buckle + Thumbscrew
  • USB-C Cable
  • GoPro Volta Battery Grip (with integrated tripod and remote)
  • GoPro Media Mod (with removable windscreen, vertical mounting buckle, thumbscrew)
  • GoPro Light Mod (with diffuser, 2-finger adapter, USB Type-C cable)
  • GoPro Magnetic Latch Mount
  • USB Pass-Through Door
  • Carrying Case
  • SanDisk Extreme Pro 64GB microSDXC Card
  • DigiNerds 50-In-1 Action Camera Accessory Kit (includes suction cup, floating handle grip, straps, mounts, monopod, etc.)
  • 6AVE Electronics Microfiber Cloth
GoPro HERO13 Black with Volta Battery Grip

Image: GoPro HERO13 Black camera attached to the Volta Battery Grip.

GoPro HERO13 Black with Media Mod and Light Mod

Image: GoPro HERO13 Black camera with the Media Mod and Light Mod attached, enhancing audio and lighting capabilities.

Setup

1. Charging the Battery

Before first use, fully charge the included Enduro battery. Insert the battery into the camera. Connect the USB-C cable to the camera's USB-C port and then to a USB power adapter (not included) or computer.

2. Inserting the microSD Card

Open the side door of the camera. Insert the SanDisk Extreme Pro 64GB microSDXC card into the card slot with the label facing the front of the camera. Close the side door securely.

3. Attaching Mods (Volta, Media Mod, Light Mod)

  • Media Mod: Slide the HERO13 Black camera into the Media Mod housing until it clicks into place. Ensure the USB-C connector aligns.
  • Light Mod: The Light Mod can be attached to the cold-shoe mounts on the Media Mod.
  • Volta Battery Grip: The Volta connects to the camera's USB-C port (or the Media Mod's USB-C port) and provides extended power and remote control. Align the mounting fingers of the camera (or Media Mod) with the Volta's mount and secure with the thumbscrew.
GoPro HERO13 Black with mounting fingers extended

Image: The GoPro HERO13 Black camera with its integrated mounting fingers extended, ready for attachment to accessories.

Operating Instructions

1. Power On/Off

  • Power On: Press the Mode button (side of camera) briefly.
  • Power Off: Press and hold the Mode button for 3 seconds.

2. Changing Modes

Press the Mode button repeatedly to cycle through Video, Photo, and TimeWarp modes. The current mode will be displayed on the front and rear LCD screens.

3. Recording Video / Taking Photos

  • Start/Stop Recording: In Video mode, press the Shutter button (top of camera) once to start recording. Press again to stop.
  • Take Photo: In Photo mode, press the Shutter button once to capture a photo.

4. Using the Touch Screen

The rear touch screen allows you to navigate menus, change settings, and preview your shots. Swipe down from the top for settings, swipe left/right to change modes, and tap to select options.

5. Volta Remote Control

When connected, the Volta grip's buttons can control the camera. The large red button acts as the Shutter/Record button, and the smaller button cycles through modes.

6. Light Mod Operation

Press the button on the Light Mod to cycle through different brightness levels and strobe modes. Refer to the Light Mod's specific instructions for detailed usage.

Video: A short overview of the GoPro HERO13 Black Creator Edition, demonstrating its key features and components.

Video: Detailed demonstration of the GoPro HERO13 Black's capabilities, including video recording, photo capture, and stabilization features.

Maintenance

1. Cleaning the Camera

After use, especially in saltwater or dirty environments, rinse the camera with fresh water and dry thoroughly with a soft, lint-free cloth. Do not use harsh chemicals or abrasive materials. Clean the lens with a lens cloth only.

2. Battery Care

Store batteries in a cool, dry place. Avoid extreme temperatures. If storing for extended periods, charge batteries to approximately 50% capacity.

3. Firmware Updates

Periodically check for firmware updates via the GoPro Quik app or GoPro's official website to ensure your camera has the latest features and performance improvements.

Troubleshooting

IssuePossible Solution
Camera not powering onEnsure the battery is fully charged and correctly inserted. Try a different battery if available.
Recording stops unexpectedlyCheck if the microSD card is full or corrupted. Use a recommended, high-speed microSD card. Ensure the camera is not overheating.
Poor video qualityClean the camera lens. Ensure proper lighting conditions. Check resolution and frame rate settings.
Volta remote not connectingEnsure Bluetooth is enabled on the camera. Re-pair the Volta with the camera. Check Volta battery level.
Camera frozen/unresponsiveRemove and reinsert the battery to perform a hard reset.

Specifications

FeatureDetail
Model NumberCHDFB-131CN_EDI_1
Photo Resolution27MP
Video ResolutionUp to 5.3K60, 4K120, 2.7K240
Image Sensor1/1.9" CMOS
StabilizationHyperSmooth 6.0 with AutoBoost
Waterproof DepthUp to 33 feet (10 meters)
Battery Type1900mAh Enduro Rechargeable Li-Ion
ConnectivityWi-Fi, Bluetooth
StorageMicro SDXC (64GB card included)
Product Dimensions1.3 x 2.8 x 2 inches
Item Weight5.21 pounds (total package weight)

Warranty and Support

Warranty Information

Your GoPro HERO13 Black Creator Edition is covered by a manufacturer's warranty. Please refer to the official GoPro website or the warranty card included in your original packaging for specific terms and conditions, including warranty duration and coverage details.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact GoPro Customer Support directly. You can find support resources, FAQs, and contact information on the official GoPro website:

Visit the Official GoPro Store for Support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.