1. Introduction
Thank you for purchasing the BEPER P203TER011 Ceramic Column Fan Heater. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your appliance. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:
- Read all instructions before using this heater.
- Do not use this heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
- Always unplug the heater when not in use.
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and away from the sides and rear.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Close supervision is necessary when any heater is used by or near children or invalids.
3. Product Overview
The BEPER P203TER011 is a versatile ceramic column fan heater designed for efficient heating and air circulation. It features a modern design with advanced functionalities.
Key Features:
- 2000W Power: Provides rapid and effective heating.
- Ceramic Heating Elements: Ensures stable and safe heat distribution.
- LED Flame Effect: Creates a cozy ambiance.
- Fan Function: Allows for air circulation without heat.
- Oscillation: Horizontal swing for wider heat distribution.
- 8-Hour Timer: Programmable shutdown for convenience and energy saving.
- Touch Control Panel: Intuitive interface for easy operation.
- Remote Control: For convenient adjustment from a distance.
4. Setup
Follow these steps to set up your BEPER P203TER011 heater:
- Unpacking: Carefully remove the heater from its packaging. Retain the packaging for storage or in case of return.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from walls, furniture, and other objects. Do not place it on soft surfaces like beds or rugs where openings may be blocked.
- Power Connection: Ensure the power cord is fully extended and plug it into a grounded electrical outlet. The heater is designed for 220-240V, 50Hz power supply.
5. Operating Instructions
Your BEPER P203TER011 heater can be operated using the touch control panel on the unit or the included remote control.
Control Panel and Remote Control:
Functions:
- Power On/Off: Press the power button (⏻) on the control panel or remote control to turn the unit on or off.
- Mode Selection: Cycle through heating modes (low heat, high heat) and fan-only mode using the mode button (often represented by a fan or sun icon).
- Temperature Adjustment: Use the '+' and '-' buttons to set your desired temperature. The LED display will show the current and set temperature.
- Timer Function: Press the timer button (often represented by a clock icon) to set the automatic shutdown time, up to 8 hours. Each press typically increases the time by 1 hour.
- Oscillation: Press the oscillation button (often represented by a double-arrow icon) to activate or deactivate the horizontal swing function, distributing heat more widely.
- LED Flame Effect: Press the flame effect button (often represented by a flame icon) to turn the decorative LED flame on or off. This function can be used independently of the heating function.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
Cleaning:
- Always unplug the heater and allow it to cool completely before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
- Gently vacuum the air intake and exhaust grilles to remove dust and lint.
- Never immerse the heater in water or spray water directly onto it.
Storage:
When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
7. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power switch off; safety feature activated. | Ensure plug is securely in outlet; turn power switch on; check for tip-over or overheating activation (unplug, wait 30 min, plug in). |
| No heat, only fan. | Heater is in fan-only mode. | Press the mode button to select a heating mode (low or high heat). |
| Heater stops unexpectedly. | Overheating protection or tip-over switch activated. | Unplug the heater, wait 30 minutes for it to cool down. Ensure it is on a stable surface and not obstructed. Plug back in. |
| Remote control not working. | Batteries are dead or incorrectly inserted. | Replace batteries with new ones, ensuring correct polarity. |
8. Specifications
- Brand: BEPER
- Model Number: P203TER011
- Color: Black
- Power: 2000W
- Heating Element: Ceramic
- Special Features: LED Display, Programmable Timer, Oscillation, LED Flame Effect, Remote Control, Overheating Protection, Tip-Over Switch
- Product Dimensions: Approximately 20 x 20 x 66 cm
- Product Weight: Approximately 2 kg
- Power Supply: 220-240V ~ 50Hz
9. Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or contact BEPER customer service through their official website or the retailer where the product was purchased. Please have your model number (P203TER011) and proof of purchase ready when contacting support.
