What is the whitening function on the LOKMAT APPLLP 8 PRO?

The user manual for the LOKMAT APPLLP 8 PRO 4G Android Smartwatch does not mention a 'whitening function'. It's possible this feature is not available on this specific model, or it might be referred to by a different name. The manual details features such as fitness tracking, health monitoring (heart rate, blood oxygen), NFC, GPS, camera functionality, and app installation.

How can I fix an unresponsive touchscreen and 'ghost touching' on my LOKMAT APPLLP 8 PRO smartwatch?

The issues you are describing, such as the screen not responding to touch during calls or items opening by themselves (often called "ghost touching"), are typically related to either software glitches or physical interference with the touchscreen. Based on the LOKMAT APPLLP 8 PRO manual and general troubleshooting for Android smartwatches, please try the following steps:Restart the Device: The manual recommends restarting the device as the first step if the touchscreen becomes unresponsive. Press and hold the power button to perform a reboot.Clean the Screen: Ensure the display is completely clean and dry. Use a soft, lint-free cloth. Moisture, oil, or dirt on the screen can cause the sensor to detect "phantom" touches or fail to recognize your actual finger.Check for Screen Protectors: If you have applied a third-party screen protector, it may be interfering with the touch sensitivity. Try removing it to see if the behavior improves.Check for Water Ingress: While the watch is rated IPX7, ensure the SIM card slot cover is tightly closed. If moisture has entered the casing, it can cause the display to "shake" or act erratically.Factory Reset: Since the watch runs on Android 8.1, you can navigate to Settings > System > Reset options to perform a factory reset. This will rule out any third-party applications causing the instability. Note: This will erase your data.If the screen continues to shake or move items on its own after a factory reset, it likely indicates a hardware defect in the digitizer. The LOKMAT APPLLP 8 PRO comes with a 1-Year Limited Warranty; you should contact LOKMAT customer service or your retailer for a warranty claim.

LOKMAT APPLLP 8 PRO 4G Android Smartwatch User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your LOKMAT APPLLP 8 PRO 4G Android Smartwatch. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

What's in the Box

Verify that all items are present in the package:

LOKMAT APPLLP 8 PRO Smart Watch (x1)
Charging Cable (x1)
SIM Card Pick-up Tool (x1)
User Manual (x1)

Product Overview

The LOKMAT APPLLP 8 PRO is a 4G Android smartwatch featuring a 1.85-inch HD display, 3GB RAM, 32GB storage, and an 1100mAh battery. It supports 4G network connectivity, Wi-Fi, GPS, NFC, and includes a 200MP HD camera. The watch runs on Android 8.1, allowing for a wide range of applications and functionalities.

LOKMAT APPLLP 8 PRO Smartwatch front view

Figure 1: Front view of the LOKMAT APPLLP 8 PRO Smartwatch, showcasing its round display and robust design.

LOKMAT APPLLP 8 PRO Smartwatch with 4G/5G Phone Cards feature

Figure 2: The smartwatch highlighting its 4G/5G phone card support and network capabilities.

Setup

1. SIM Card Installation

The smartwatch supports a Nano SIM card for 4G/3G/2G network connectivity. Use the provided SIM card pick-up tool to open the SIM card slot and insert your Nano SIM card. Ensure the card is correctly oriented.

Smartwatch displaying phone call interface with SIM card details

Figure 3: Illustration of the smartwatch's 4G/5G phone card support, showing an incoming call and network details.

2. Initial Power On and Network Connection

Press and hold the power button to turn on the smartwatch. Follow the on-screen prompts for initial setup, including language selection and connecting to a Wi-Fi network. The watch will automatically detect the 4G network if a SIM card is installed.

Video 1: Demonstrates the smartwatch's interface, including network settings, app navigation, and camera functionality. This video shows how to access settings, connect to Wi-Fi, browse applications like TikTok, and use the phone and camera features directly from the watch.

Operating Instructions

1. Basic Navigation

The smartwatch features a touchscreen display. Swipe left, right, up, or down to navigate through menus and applications. Use the physical buttons for power, back, or quick access functions as defined in the settings.

2. Phone Calls and Messaging

With a Nano SIM card installed, you can make and receive calls directly from the watch. Access the "Phone" app to dial numbers or view contacts. The "Messaging" app allows you to send and receive SMS.

Smartwatch displaying various social media and communication apps

Figure 4: The smartwatch screen showing various social media and communication applications, indicating its capability for online interaction.

3. Camera Functionality

The smartwatch is equipped with a 200MP HD camera. Open the camera application to take photos or record videos. Tap the screen to capture an image or start/stop video recording.

Smartwatch with a camera lens visible and a photo displayed on screen

Figure 5: The smartwatch showcasing its 200MP high-definition camera, with an image displayed on the screen.

4. Fitness Tracking and Health Monitoring

Utilize the built-in PPG biosensor and multiple exercise modes to track your daily activities. The watch monitors steps, distance, calories, workout time, heart rate, and blood oxygen levels. Access these features through the dedicated fitness and health apps.

Heart Rate Monitoring: Real-time heart rate tracking.
Blood Oxygen Detection: Measures blood oxygen levels.
Breathing Training: Guided breathing exercises.
Multiple Sports Modes: Supports various activities like running, skipping rope, climbing, etc.
SOS Emergency Feature: One-touch emergency function for outdoor safety.

Smartwatch displaying health metrics and sports activity icons

Figure 6: The smartwatch illustrating its health monitoring capabilities (heart rate, blood oxygen, breathing) and various sports modes.

5. NFC Access Control

The smartwatch includes NFC functionality for access control. Configure NFC commands to simulate access cards, allowing you to open compatible doors or access points with a simple touch of your wrist.

Smartwatch being used for NFC access control at a gate

Figure 7: A user demonstrating the NFC access control feature of the smartwatch at an entry gate.

6. GPS Navigation

With support for nine types of positioning (GPS, BeiDou, GLONASS, AGPS, LBS, WIFI), the smartwatch provides precise trajectory navigation. Use compatible navigation applications from the Google Play Store for travel assistance.

7. App Installation (Google Play Store)

Running on Android 8.1, the smartwatch allows you to download and install third-party applications directly from the Google Play Store. This includes games, social media, video entertainment, and productivity apps.

Smartwatch displaying a game on its screen

Figure 8: The smartwatch screen showing a game, illustrating its capability to run playable applications.

Smartwatch displaying a video streaming service

Figure 9: The smartwatch screen displaying a video streaming service, highlighting its large screen for media consumption.

Maintenance

1. Charging

Connect the provided charging cable to the smartwatch and a compatible USB power source. Ensure the charging contacts are clean and dry before charging. A full charge typically takes several hours.

2. Cleaning

Wipe the smartwatch screen and body with a soft, lint-free cloth. Avoid using abrasive materials or harsh chemicals. For the metal band, a slightly damp cloth can be used, followed by drying.

3. Water Resistance

The smartwatch has an IPX7 water resistance rating. This means it can withstand immersion in water up to 1 meter for up to 30 minutes. It is suitable for everyday use and splashes but should not be used for swimming or diving. Ensure the SIM card slot cover is securely closed to maintain water resistance.

Troubleshooting

Watch not turning on: Ensure the watch is fully charged. Connect it to the charger for at least 30 minutes before attempting to power it on again.
No network connection: Check if the Nano SIM card is correctly inserted. Verify that your SIM card has an active data plan. Ensure Wi-Fi is enabled and connected to a stable network.
Apps not downloading/installing: Check your internet connection (Wi-Fi or 4G). Ensure there is sufficient storage space on the device.
Inaccurate health data: Ensure the watch is worn snugly on your wrist, with the sensors making proper contact with your skin. Avoid excessive movement during measurements.
Touchscreen unresponsive: Restart the device. If the issue persists, ensure the screen is clean and dry.

Specifications

Model Name	APPLLP 8 PRO
Operating System	Android 8.1
Display	1.85-inch HD Circular Screen, 360x360 Resolution
Memory	3GB RAM + 32GB Storage
Battery Capacity	1100mAh Lithium Polymer
Connectivity	4G (GSM, WCDMA, LTE-FDD, LTE-TDD), Wi-Fi, Bluetooth, NFC
GPS	Built-in GPS (GPS, BeiDou, GLONASS, AGPS, LBS, WIFI)
Camera	200MP HD Camera
Water Resistance	IPX7
Sensors	Optical Heart Rate Sensor
Material	Metal Case, Metal Band
SIM Card Size	Nano SIM

Warranty and Support

The LOKMAT APPLLP 8 PRO Smartwatch comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.

For technical support, warranty claims, or further assistance, please contact LOKMAT customer service through the official website or your retailer.