Product Overview
This product consists of a 5-pack of replacement filter bags designed for use with various Shop Vac vacuum models. These disposable collection bags are essential for capturing dust and debris during dry vacuuming operations, helping to maintain vacuum efficiency and cleanliness.
Image: Five replacement filter bags, indicating 5-8 gallon capacity.
Image: Close-up of a single filter bag, highlighting its 5-8 gallon capacity and dry-only use.
Compatibility
These replacement filter bags are compatible with Shop Vac vacuum models requiring Type E (90661, 906-61, 9066100) and Type H (90671, 9067100) bags, specifically designed for 5-8 gallon vacuums. They are suitable for dry pick-up only and are not intended for use with Wall Mount or Hang Up Vacs.
Compatible models include, but are not limited to:
- 12RT300, 4045, 6045AH
- 84L250B, 84L300, 84M250B
- 85L350, 85M300, 86L350, 86M300
- 87L350, 87L450, 87M300, 87M350
- 90M300, 92L350, 92M300
- H87S550A, H87S650C
- QL20ATS, QL20ATSP, QPL40, QPL650
Also compatible with vacmater VHBS VDBS, stanley 19-3100, craftsman cmxzvbe38775, cmxzvbe38767, and ridgid VF3503. The vacuum nozzle attachment diameter should be 2-1/2 inches (6.3 cm).
Image: Visual representation of compatible vacuum models.
Image: Detail of the bag's opening, showing the 2 1/2 inch diameter of the circular hole in the cardboard.
Setup and Installation
Proper installation of the filter bag ensures optimal performance and prevents dust leakage. Follow these steps for correct setup:
- Open Vacuum Lid: Unlatch and remove the lid of your Shop Vac vacuum cleaner.
- Insert Bag: Carefully insert the new filter bag into the vacuum drum. Ensure the bag is fully unfolded inside the drum.
- Seal Around Inlet: Position the bag's cardboard collar firmly around the vacuum's inlet port. The rubber gasket on the bag's opening should create a tight seal to prevent dust from escaping. The opening of the rubber gasket is 1 1/2 inches.
- Close Lid: Once the bag is securely in place, reattach and latch the vacuum lid.
Image: Step-by-step visual guide for filter bag installation.
Operation
After successful installation, the vacuum cleaner can be operated as normal. The filter bag will effectively capture most small particles and dust, including wood dust, construction debris, and general dirt, preventing them from recirculating into the air or damaging the vacuum's motor.
These bags are designed for dry pick-up applications only. Do not use for wet vacuuming, as this can damage the bag and the vacuum.
Maintenance
To ensure optimal performance and longevity of your vacuum, regular replacement of the filter bag is recommended. The filtration bags have a long life, but for best results, replace the Shop Vac bags approximately every month, or sooner if the bag becomes full or suction power noticeably decreases.
Disposal: When the bag is full, or after use, carefully remove the bag from the vacuum. The collar system is designed to prevent dust from escaping during disposal. Discard the used bag into a proper receptacle.
Image: Benefits of using a dust bag, including extending vacuum life.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1 x 1 x 0.1 inches |
| Item Weight | 10.23 ounces (for 5-pack) |
| Model Number | GDFFD |
| Brand | FDHF |
| Material | Paper |
| Special Feature | Easy Installation |
| Color | White |
| Compatible Devices | Vacuum Cleaner (Shop Vac 5-8 Gallon) |
Important Information
Legal Disclaimer
This product is a compatible replacement and is not manufactured by Shop-Vac. Shop-Vac is a registered trademark of its respective owners. Any use of the Shop-Vac brand name or model designation for this product is made solely for purposes of demonstrating compatibility. This product is not covered under any Shop-Vac manufacturer's safeguard or warranty.
Image: Packaging details including installation options and legal disclaimers.