1. Introduction
This manual provides detailed instructions for the installation, configuration, and operation of your WAVLINK AC1200 Outdoor Long Range Wi-Fi Extender, Model WN570HA2. This device is designed to extend your wireless network coverage in outdoor environments, offering reliable dual-band Wi-Fi connectivity.
2. Product Overview
2.1 Package Contents
Verify that all items are present in your package:
- 1x AC1200 Dual Band Access Point
- 2x 7dBi High-gain Antennas
- 1x RJ-45 Ethernet Cable
- 1x Power Adapter
- 1x PoE Converter
Image: Contents of the WAVLINK AC1200 Outdoor Wi-Fi Extender package, including the main unit, antennas, Ethernet cable, power adapter, and PoE converter.
2.2 Device Features
- Dual-Band AC1200 Wi-Fi: Supports Wi-Fi 5 technology with speeds up to 1200Mbps (300Mbps on 2.4GHz and 867Mbps on 5GHz).
- Long Range Coverage: Provides a maximum coverage range of 200 meters (656 feet) and supports up to 32 connected devices.
- Multiple Working Modes: Functions as a Repeater, Router, AP, or AP+Repeater.
- Power Over Ethernet (PoE): Integrated active and passive PoE for flexible power and data transmission via a single RJ-45 cable.
- IP67 Weatherproof Enclosure: Designed for harsh outdoor environments, resistant to dust and water.
- Environmental Durability: Operates in temperatures from -10°C to 50°C (-14°F to 122°F), with 15KV ESD and 6KV lightning protection.
- High-Gain Antennas: Equipped with two 7dBi omni-directional antennas for enhanced signal range and stability.
- WPA2 Encryption: Strengthens Wi-Fi encryption for increased security.
Image: The WAVLINK AC1200 Outdoor Wi-Fi Extender unit, showing its camouflage design and two external antennas.
Image: Diagram illustrating the IP67 waterproof enclosure, temperature resistance (-10°C to 50°C), 15KV ESD, and 6KV lightning protection features of the device, set against a rainy outdoor background.
Image: Close-up of the WAVLINK AC1200 device highlighting its IP67 waterproof case, with a stormy sky background, emphasizing its durability against harsh weather.
Image: Graphic showing the WAVLINK AC1200 device with "2.4G+5G Dual Channel" and "656 FT" (200 meters) coverage, indicating its long-range dual-band capabilities in an urban setting.
2.3 Physical Interface
The device features a WAN/LAN port, a reset button, and LED indicators for power, Wi-Fi, and WAN/LAN status.
Image: Bottom view of the WAVLINK AC1200 device, showing the WAN/LAN (PoE) port, reset button (8s), and default Wi-Fi parameters (5G SSID: WAVLINK-AC XXXX, 2.4G SSID: WAVLINK-N XXXX, Default IP: 192.168.10.1, Password: admin).
3. Setup and Installation
3.1 Antenna Installation
- Carefully screw the two 7dBi high-gain antennas onto the corresponding connectors on the top of the device.
- Ensure they are securely tightened but do not overtighten.
3.2 Cable Connection and Sealing
Proper sealing of the Ethernet cable is crucial for maintaining the IP67 weatherproof rating.
- Pass the RJ45 Ethernet cable through the spiral cover.
- Thread the cable through the rubber seal.
- Pass the cable through the holder.
- Connect the RJ45 cable to the RJ45 port on the device.
- Screw up the holder.
- Plug the rubber seal into the holder.
- Secure the spiral cover by screwing it on tightly.
Image: Step-by-step diagram illustrating how to properly connect the RJ45 cable and seal the port for the WAVLINK AC1200 Outdoor Wi-Fi Extender, ensuring weather resistance.
3.3 Mounting the Device
The device can be mounted on a pole or wall using the provided mounting kit.
- Fasten the main body holder to your desired mounting location (e.g., pole).
- Plug the device into the holder.
- After connecting to PoE, turn on the power to use the device.
Image: Three-step diagram showing how to mount the WAVLINK AC1200 Outdoor Wi-Fi Extender to a pole using the provided holder, and then powering it on.
3.4 Powering the Device (PoE)
The device supports both active and passive Power over Ethernet (PoE).
- Connect the Ethernet cable from the device to the PoE converter's "PoE" port.
- Connect an Ethernet cable from your router/modem to the PoE converter's "LAN" port.
- Connect the power adapter to the PoE converter and then to a power outlet.
- Alternatively, if using an active PoE switch, connect the device directly to the PoE-enabled port on the switch.
Image: Diagram illustrating flexible support for Active and Passive PoE for the WAVLINK AC1200 device, showing connections to a PoE adapter and a modem/router, with a maximum cable length of 100m.
4. Operating Modes
The WAVLINK AC1200 supports four primary operating modes:
4.1 AP/Router Mode
In AP (Access Point) mode, the device converts a wired network connection into a wireless one. In Router mode, it creates a private wireless network, allowing multiple devices to share an internet connection.
Image: Diagram showing the three main working modes: AP/Router Mode (device connected to modem/router, broadcasting Wi-Fi), Repeater Mode (device extending existing router's Wi-Fi), and AP+Repeater Mode (one device as AP, another as Repeater for long-distance extension).
Image: Visual representation of Repeater Mode, Router Mode, and AP Mode, showing how the WAVLINK AC1200 device connects to a router/modem and provides Wi-Fi to various client devices.
4.2 Repeater Mode
Repeater mode extends the coverage of an existing wireless network by amplifying and relaying the signal from your main router.
4.3 AP+Repeater Mode
This mode involves two devices: one configured as an Access Point and another as a Repeater, working together to extend Wi-Fi over longer distances.
Image: Diagram illustrating the AP+Repeater Mode, showing a router/modem connected to an AP device, which then extends its signal to a Repeater device for further long-distance Wi-Fi coverage to client devices.
4.4 Configuration
To configure the device, connect to its default Wi-Fi network (SSID: WAVLINK-AC XXXX or WAVLINK-N XXXX) or connect directly via Ethernet. Access the web-based management interface by navigating to the default IP address: 192.168.10.1. The default password is admin. Follow the on-screen instructions to select your desired operating mode and network settings.
5. Maintenance
- Regular Checks: Periodically inspect the device and cable connections for any signs of wear or damage, especially after severe weather conditions.
- Cleaning: Gently wipe the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Firmware Updates: Check the WAVLINK official website for available firmware updates to ensure optimal performance and security.
- Resetting: If the device is unresponsive or you forget the configuration password, press and hold the reset button for 8 seconds to restore factory default settings.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| No power/LEDs off | Ensure the power adapter is securely connected to the PoE converter and a working power outlet. Check the Ethernet cable connection between the device and the PoE converter. |
| Cannot connect to Wi-Fi | Verify the correct SSID and password. Ensure the device is within range. Try restarting the device. If issues persist, perform a factory reset and reconfigure. |
| Poor Wi-Fi signal or speed | Adjust the device's position and antenna orientation. Ensure there are no major obstructions. Check for interference from other devices. Consider changing Wi-Fi channels in the configuration. |
| Cannot access web management interface | Ensure your device is connected to the extender's network (either wirelessly or via Ethernet). Verify your computer's IP address is in the same subnet as the extender (e.g., 192.168.10.x). Try clearing your browser's cache or using a different browser. Confirm the default IP address is 192.168.10.1. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | WN570HA2 |
| Wireless Standard | 802.11a/b/g/n/ac (Wi-Fi 5) |
| Data Transfer Rate | Up to 1167 Mbps (300Mbps 2.4GHz + 867Mbps 5GHz) |
| Frequency Band | Dual-Band (2.4GHz & 5GHz) |
| Antennas | 2x 7dBi Omni-directional |
| Ports | 1x WAN/LAN (100Mbps) with PoE support |
| Weatherproof Rating | IP67 |
| Operating Temperature | -10°C to 50°C (-14°F to 122°F) |
| Protection | 15KV ESD, 6KV Lightning Protection |
| Power Supply | Passive PoE / Active PoE (via PoE converter or compatible switch) |
| Dimensions (approx.) | 11.42 x 4.88 x 2.24 inches (Package) |
| Item Weight | 1.12 pounds |
8. Warranty and Support
For warranty information, technical support, and further assistance, please visit the official WAVLINK website or contact their customer service.
- WAVLINK Store: Visit the WAVLINK Store on Amazon
- Customer Service:
- Phone: +1 8889730883 (UTC -5) Mon - Fri 9AM - 6PM
- Email: Contact@wavlink.com