AZZA CSAZ-370 Forest ATX Mid-Tower Computer Case User Manual

Introduction

Thank you for choosing the AZZA CSAZ-370 Forest ATX Mid-Tower Computer Case. This manual provides detailed instructions for setting up, operating, and maintaining your new computer case. Designed for optimal performance and aesthetics, the CSAZ-370 offers excellent airflow, versatile cooling options, and flexible storage solutions for your gaming and computing needs. Please read this manual thoroughly before installation to ensure proper usage and longevity of your product.

Safety Information

• Always disconnect the power supply from the wall outlet before performing any installation, maintenance, or cleaning.
• Handle the tempered glass panel with care. It is fragile and can break if dropped or subjected to impact.
• Keep the case away from water, moisture, and extreme temperatures.
• Ensure proper grounding to prevent electrical hazards.
• Do not attempt to modify the case or its components. Unauthorized modifications may void your warranty and pose safety risks.
• Keep small parts and screws out of reach of children.

Package Contents

Please verify that all components are present in your package:

• AZZA CSAZ-370 Mid-Tower Computer Case
• Accessory Box (screws, cable ties, etc.)
• User Manual (this document)

Note: Specific accessories may vary slightly.

Setup and Installation

1. Case Overview and Dimensions

The AZZA CSAZ-370 is an ATX Mid-Tower case designed for a balance of performance and compact size. Its dimensions are optimized for various component installations.

Front-side view of the AZZA CSAZ-370 computer case, showcasing the mesh front panel with three pre-installed RGB fans and the tempered glass side panel.

Direct front view of the AZZA CSAZ-370 case, highlighting the full mesh front panel and the three vibrant RGB fans.

Diagram illustrating the massive cooling potential of the AZZA CSAZ-370, showing support for up to 280mm or 360mm radiators in the front and top positions.

Diagram detailing the ultimate thermal performance of the AZZA CSAZ-370, indicating support for up to 8 fans in various positions (front, top, rear, and above PSU shroud).

Diagram showing the internal layout of the AZZA CSAZ-370, highlighting motherboard support (ATX, Micro ATX, ITX), maximum CPU cooler height (160mm), and maximum GPU length (330mm) for excellent gaming performance.

2. Motherboard Compatibility

The CSAZ-370 supports ATX, Micro ATX, and Mini ITX motherboards. Ensure your motherboard's form factor is compatible before installation.

3. Fan and Radiator Support

The case is designed for optimal airflow and cooling performance:

• Front: Supports 3 x 120mm or 2 x 140mm fans. Pre-installed with 3 x 120mm ARGB fans.
• Top: Supports 2 x 120mm or 2 x 140mm fans.
• Rear: Supports 1 x 120mm fan.
• Above PSU Shroud: Supports 2 x 120mm fans for direct GPU airflow.
• Radiator Support: Up to 360mm in the front, and up to 280mm in the top.

4. Storage Options

The CSAZ-370 offers flexible storage configurations:

Diagram illustrating the flexible storage options within the AZZA CSAZ-370 case, showing locations for 3.5" HDDs and 2.5" SSDs.

• Multifunctional hard disk bracket supports 3.5" HDD x 1 or 2.5" SSD x 1 (Location A).
• Multifunctional hard disk cage supports 3.5" HDD x 1 or 2.5" SSD x 1 (Location B).
• 2.5" SSD metal tray supports 2.5" SSD x 2 (Location C).

5. Intuitive I/O Panel

The top panel provides convenient access to essential ports and controls:

Close-up view of the top I/O panel of the AZZA CSAZ-370 case, showing the Combo HD Audio jack, two USB 3.0 ports, LED button, and Power button.

• Power Button
• LED Button (for RGB control)
• 2 x USB 3.0 Ports
• Combo HD Audio Jack

Operating Instructions

1. Powering On/Off

Press the Power button located on the top I/O panel to turn your system on or off. A short press typically powers on, while a long press (usually 4-5 seconds) initiates a forced shutdown.

2. RGB Fan Control

The pre-installed ARGB fans can be controlled in two ways:

• LED Button: Press the LED button on the top I/O panel to cycle through different lighting modes and effects.
• Motherboard Software Synchronization: If your motherboard supports Addressable RGB (ARGB) synchronization, connect the case's ARGB cable to the appropriate header on your motherboard. This allows you to control the fan lighting directly through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Maintenance

1. Cleaning

• Exterior: Use a soft, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners or solvents.
• Dust Filters: Regularly clean the removable dust filters (if applicable) to maintain optimal airflow. Gently remove them and clean with a soft brush or rinse with water (ensure they are completely dry before reinstallation).
• Interior: Use compressed air to remove dust buildup from internal components and fans. Ensure the system is powered off and unplugged before cleaning the interior.

2. General Care

• Avoid placing heavy objects on top of the case.
• Ensure adequate ventilation around the case to prevent overheating.
• Periodically check all cable connections to ensure they are secure.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official AZZA website or contact AZZA customer service directly. Keep your proof of purchase for warranty claims.

AZZA Official Website: www.azza.com

For further assistance, please contact your local retailer or distributor.