havit TW931

Download PDF
Contents

Havit TWS Mini Size Wireless Earbuds User Manual

Model: TW931

Introduction

This manual provides detailed instructions for the Havit TWS Mini Size Wireless Earbuds (Model: TW931). Please read this manual carefully before using the product to ensure proper operation and to maximize your listening experience. These earbuds offer true wireless stereo sound, smart touch control, and a lightweight design, making them ideal for sports and travel.

Product Overview

Havit TWS Mini Size Wireless Earbuds in their orange and white charging case, with the lid open showing both earbuds inside.

Figure 1: Havit TWS Mini Size Wireless Earbuds and Charging Case

The image displays the Havit TWS Mini Size Wireless Earbuds, white in color, resting inside their compact charging case. The case features an orange interior, contrasting with its white exterior. The lid of the charging case is open, revealing both earbuds securely nestled within their respective slots. Below the earbuds, three small indicator lights are visible, suggesting the charging status or battery level of the case.

Components:

  • Left Earbud
  • Right Earbud
  • Charging Case
  • USB Type-C Charging Cable
  • User Manual (this document)

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

  1. Connect the provided USB Type-C cable to the charging port on the case and the other end to a USB power adapter (5V/1A recommended).
  2. The indicator lights on the charging case will illuminate to show charging status. Once fully charged, the lights may turn solid or turn off, depending on the model.
  3. Place the earbuds into the charging case. Ensure they are correctly seated; the earbuds will automatically begin charging. The earbud indicators will show charging status.

2. Pairing with Your Device

The earbuds support Bluetooth connectivity for seamless pairing.

  1. Open the charging case. The earbuds will automatically enter pairing mode (or manually activate by pressing and holding the touch area on both earbuds if they don't pair automatically).
  2. On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
  3. Search for available devices and select "Havit TW931" (or similar name) from the list.
  4. Once connected, you will hear a confirmation tone, and the earbud indicator lights will change.
  5. If pairing fails, turn off Bluetooth on your device, place the earbuds back in the case, close the lid, wait a few seconds, then repeat the steps.

Operating Instructions

Wearing the Earbuds:

Gently insert each earbud into your ear canal. Adjust them slightly until they feel secure and comfortable, ensuring the best sound quality and fit.

Touch Controls:

FunctionAction
Play/PauseSingle tap on either earbud
Next TrackDouble tap on the Right earbud
Previous TrackDouble tap on the Left earbud
Answer/End CallSingle tap on either earbud
Reject CallPress and hold either earbud for 2 seconds
Activate Voice AssistantTriple tap on either earbud
Volume UpPress and hold Right earbud
Volume DownPress and hold Left earbud

Note: Specific touch controls may vary slightly. Refer to the quick start guide included with your product for precise details.

Maintenance

Cleaning:

  • Use a soft, dry, lint-free cloth to clean the earbuds and charging case.
  • Do not use abrasive cleaners, alcohol, or chemical sprays.
  • Regularly clean the charging contacts on both the earbuds and the case to ensure proper charging.

Storage:

  • When not in use, always store the earbuds in their charging case to protect them and keep them charged.
  • Store the product in a cool, dry place, away from extreme temperatures and direct sunlight.

Troubleshooting

ProblemSolution
Earbuds not pairing with device
  • Ensure earbuds are charged.
  • Turn off and on Bluetooth on your device.
  • Place earbuds back in case, close lid, wait 5 seconds, then reopen to re-enter pairing mode.
  • Forget "Havit TW931" from your device's Bluetooth list and try pairing again.
Only one earbud working
  • Ensure both earbuds are charged.
  • Place both earbuds back in the charging case, close the lid, and then take them out again.
  • Reset the earbuds (refer to product-specific reset instructions if available, usually involves holding touch areas for an extended period).
Low volume or poor sound quality
  • Adjust volume on your device and earbuds.
  • Ensure earbuds are properly seated in your ears.
  • Clean any debris from the earbud speaker mesh.
  • Move closer to your connected device to avoid interference.
Charging case not charging
  • Check the USB cable and power adapter.
  • Ensure the charging port is clean and free of debris.
  • Try a different charging cable or power source.

Specifications

FeatureDetail
Model NumberTW931
BrandHavit
Form FactorTrue Wireless In-Ear
ConnectivityBluetooth
Impedance32 Ohm
Battery Life (Earbuds)Up to 4 hours (continuous playback)
Battery Life (with Charging Case)Additional 16 hours
Charging PortType-C
ColorOrange + White
Dimensions (Package)12.3 x 9.5 x 4.4 cm
Weight (Package)100 g

Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Havit website. You may also contact your retailer for assistance.

Extended warranty options may be available from third-party providers. For example, 1-Year Extended Warranty by Salama Care and 2-Year Extended Warranty by Salama Care are offered for this product.

For further assistance, please contact Havit customer service through their official channels.

© 2024 Havit. All rights reserved.

This manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.