1. Introduction
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the BDPQKPDV Motorized Brass Valve, including models VC6013 and VC4013. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent damage or injury.
1.1 Safety Information
- Always disconnect power before installation, maintenance, or troubleshooting.
- Ensure all electrical connections comply with local codes and regulations.
- Installation should be performed by qualified personnel.
- Do not exceed the specified voltage or pressure ratings.
- Wear appropriate personal protective equipment (PPE) during installation and maintenance.
2. Product Overview
The BDPQKPDV Motorized Brass Valve is designed for controlling the flow of water in various applications. It features a durable brass body and an electric actuator for reliable operation. This series includes 2-way and 3-way configurations, with models like VC6013 (three lines, two controls) and VC4013 (three lines, one control), operating on 220VAC power.
Figure 1: BDPQKPDV Motorized Brass Valve body. This image shows the robust brass construction of the valve, with the spring-loaded mechanism visible at the top, indicating its motorized function. Ports are visible on the sides for connection to plumbing.
3. Specifications
| Model Numbers | VC6013 (3 lines, 2 controls), VC4013 (3 lines, 1 control) |
| Control Method | Switch Type |
| Voltage | 220VAC (±10%) |
| Power Consumption | 6 watts (during actuation) |
| Action Time | 6 seconds (at 60Hz) |
| Cable Connection | 0.5m cable included |
| Port Size (Current Variant) | DN15 (1/2 inch) |
| Media | Water |
| Material | Brass |
| Temperature of Media | Normal Temperature |
| Pressure | Low Pressure |
| Item Weight | 1.76 ounces (approx. 50g) |
| Package Dimensions | 1.18 x 0.79 x 0.39 inches (approx. 3 x 2 x 1 cm) |
4. Setup and Installation
4.1 Mounting the Valve Body
- Ensure the system is depressurized and drained before installation.
- Identify the inlet and outlet ports on the valve body. An arrow on the valve body typically indicates the direction of flow.
- Thread the valve into the plumbing system. Use appropriate thread sealant (e.g., PTFE tape) to ensure a watertight connection. Do not overtighten.
- Ensure the valve is installed in an accessible location for future maintenance.
4.2 Electrical Wiring
The valve operates on 220VAC. Wiring configurations vary between VC6013 (three lines, two controls) and VC4013 (three lines, one control). Refer to the specific wiring diagram provided with your valve model for precise connections.
- General Wiring Precaution: Always ensure power is OFF at the circuit breaker before making any electrical connections.
- Connect the power supply (220VAC) to the designated terminals on the actuator.
- For switch-type control, connect the control wires to a suitable switch or control system.
- Ensure all connections are secure and insulated to prevent short circuits.
5. Operating Instructions
The BDPQKPDV Motorized Brass Valve uses a switch-type control method. When the control signal is applied, the actuator will move the valve to its open or closed position. The action time for a full cycle (open to close or close to open) is approximately 6 seconds at 60Hz.
- To Open/Close the Valve: Activate the connected switch or control system. The actuator will energize and move the valve to the commanded position.
- The valve will hold its position once the actuation is complete and power is removed from the motor (power is only consumed during the 6-second actuation period).
- Observe the flow indicator (if present) or listen for the change in flow to confirm valve operation.
6. Maintenance
Regular maintenance ensures the longevity and reliable operation of your motorized brass valve.
- Annual Inspection: Periodically inspect the valve for any signs of leaks, corrosion, or physical damage.
- Electrical Connections: Check electrical connections for tightness and signs of wear or overheating.
- Actuator Function: Test the valve's operation periodically to ensure the actuator moves smoothly and completes its full travel.
- Cleaning: Keep the exterior of the valve and actuator clean and free from dust or debris. Do not use harsh chemicals that could damage the brass or plastic components.
- No User-Serviceable Parts: The internal components of the actuator and valve body are not designed for user servicing. Do not attempt to disassemble the unit beyond what is described in this manual.
7. Troubleshooting
If you encounter issues with your BDPQKPDV Motorized Brass Valve, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Valve does not operate (no movement) | No power to actuator; faulty wiring; actuator failure. | Check power supply (220VAC). Verify all wiring connections are secure. If power is present and wiring is correct, the actuator may need replacement. |
| Valve operates slowly or partially | Low voltage; obstruction in valve; actuator malfunction. | Verify stable 220VAC supply. Check for debris in the pipeline (requires system shutdown and valve removal). If issues persist, actuator may be faulty. |
| Leakage from valve body | Improperly sealed connections; damaged valve body. | Ensure pipe threads are properly sealed with PTFE tape and tightened correctly. If the valve body is damaged, it must be replaced. |
If troubleshooting steps do not resolve the issue, contact customer support for further assistance.
8. Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact BDPQKPDV customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Contact Information: Please refer to the manufacturer's official website or product packaging for the most current contact details.
