NOVAMAISON 6-Drawer Fluted White and Gold Dresser Instruction Manual (Model FH0021WHN)

Introduction

Thank you for choosing the NOVAMAISON 6-Drawer Fluted White and Gold Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Important Safety Information

• Always assemble the dresser on a soft, clean surface to prevent scratches.
• Ensure all parts are present and undamaged before assembly. Do not use damaged parts.
• For your safety, it is highly recommended to use the provided anti-tipping kit to secure the dresser to a wall. This prevents accidental tipping, especially in households with children or pets.
• Do not allow children to climb on or play with the dresser.
• Keep small parts and packaging materials away from children.
• Use appropriate tools as specified in the assembly instructions.

Package Contents

Before starting assembly, verify that all components and hardware are included in your package. A detailed list with specific quantities is typically found in the included paper manual. If any parts are missing or damaged, please contact customer support.

Typical Components:

• Top Panel
• Bottom Panel
• Side Panels (2)
• Middle Support Panels (2)
• Drawer Boxes (6 sets of sides, back, and bottom)
• Drawer Fronts (6)
• Legs (6)
• Drawer Slides (12 pairs)
• Hardware Pack (various screws, cam locks, dowels)
• Anti-Tipping Kit

Setup and Assembly Instructions

Follow these general steps carefully to assemble your dresser. It is recommended to have two people for assembly. Refer to the detailed instructions and diagrams provided in your physical manual for precise guidance.

1. Unpack and Identify Parts: Lay out all components and hardware on a clean, soft surface. Cross-reference with your parts list.
2. Assemble Main Frame: Connect the side panels, top panel, bottom panel, and internal support panels using the provided hardware (e.g., cam locks, cam bolts, dowels).
3. Attach Legs: Secure the legs to the bottom panel of the dresser.
4. Assemble Drawers: For each of the six drawers, assemble the drawer box using the side, back, and bottom panels. Attach the drawer front and handle.
5. Install Drawer Slides: Attach the remaining parts of the drawer slides to the sides of each assembled drawer.
6. Insert Drawers: Carefully slide each assembled drawer into its corresponding slot in the dresser frame.
7. Install Anti-Tipping Kit: Secure the dresser to the wall using the provided anti-tipping kit. This is a critical safety step.

Assembly Video Guide

For a visual walkthrough of the assembly process, please refer to the official product video below:

Operating Instructions

Drawer Usage

The NOVAMAISON dresser features six spacious drawers designed for smooth operation. Each drawer is equipped with metal slides for effortless opening and closing.

• To open a drawer, gently pull the gold handle.
• To close a drawer, push it firmly until it is fully seated within the frame.
• Avoid overloading drawers to ensure smooth operation and prevent damage to the slides.

Figure 1: An open drawer demonstrating the interior storage capacity.

Figure 2: Visual representation of the dresser's storage capabilities for various items.

Figure 3: Diagram showing efficient use of drawer space.

Maintenance

Cleaning Instructions

To maintain the appearance and longevity of your dresser, follow these cleaning guidelines:

• Wipe the dresser surfaces with a dry, soft cloth.
• Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the finish.
• For minor spills, wipe immediately with a slightly damp cloth and then dry thoroughly.
• Regularly check and tighten any loose hardware to ensure stability.

Troubleshooting

If you encounter any issues with your dresser, please refer to the following common solutions:

• Drawers not closing smoothly: Check if the drawer slides are properly aligned and free of obstructions. Ensure drawers are not overloaded.
• Wobbling dresser: Verify that all cam locks and screws are tightened. Ensure the dresser is placed on a level surface. If necessary, adjust the anti-tipping kit for added stability.
• Missing or damaged parts: If you find any parts missing or damaged during assembly, please contact NOVAMAISON customer support immediately for assistance.

Specifications

Figure 4: Detailed product dimensions.

Warranty and Support

NOVAMAISON is committed to customer satisfaction. If you encounter any issues with assembly, damaged or missing parts, or other product quality concerns, please do not hesitate to contact our customer support team. We aim to respond within 24 hours and provide effective solutions, including replacements, returns, or refunds.

For support, please visit the NOVAMAISON Store on Amazon or contact us directly through your purchase platform.