DREO DR-HTF009S

Download PDF
Contents

DREO DR-HTF009S Tower Fan User Manual

Model: DR-HTF009S | Brand: DREO

Important Safety Instructions

Please read all instructions and warnings carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always place the fan on a stable, flat, and level surface to avoid tipping.
  • Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact DREO customer support for assistance.
  • Keep the fan away from water or moist environments. Do not immerse the fan in water or other liquids.
  • Ensure that fingers or other objects do not enter the fan grilles during operation.
  • Unplug the fan from the power outlet when not in use, before cleaning, or before moving it.
  • Do not block air openings or operate near curtains or other materials that may block airflow.
  • This appliance is for household use only. Do not use outdoors.
  • Supervise children when the fan is in use.

Package Contents

Verify that all items listed below are present and in good condition.

  • 1 x DREO Tower Fan Unit
  • 2 x Base Halves
  • 1 x Remote Control (Battery included)
  • 1 x User Manual
  • 1 x Quick Start Guide
DREO Tower Fan components including main unit, base halves, remote, and manual.

This image displays all the components included in the DREO Tower Fan package: the main tower fan unit, two base halves, a remote control, a quick start guide, and the user manual.

Setup

Follow these steps to assemble your DREO Tower Fan.

  1. Base Assembly: Keep the two base halves in a crossed position. Insert the pegs on one half into the slots on the other half. Press down firmly to join the base halves together.
  2. Attach Base to Fan Body: Run the power cord through the central hole of the assembled base. Align the four pegs on the fan body with the corresponding slots on the base. Rotate the base clockwise until it locks securely into place.
  3. Cord Management: Thread the power cord through all rear cord keepers on the base to ensure it is neatly secured and does not interfere with the fan's stability.
  4. Remote Control Preparation: Remove the battery protective film from the remote control before first use.

Video demonstrating the assembly process of the DREO 42-inch Tower Fan, including attaching the base and managing the power cord.

Operating Instructions

Your DREO Tower Fan offers multiple ways to control its functions.

Control Panel

The intuitive touch control panel is located on the top of the fan unit.

Close-up of DREO Tower Fan's top control panel with touch buttons.

A detailed view of the DREO Tower Fan's intuitive touch control panel located on the top of the unit.

Remote Control

Use the included remote control for convenient operation from a distance.

DREO Tower Fan with its included remote control.

The DREO Tower Fan shown alongside its compact remote control for convenient operation.

App Control & Voice Control

Download the DREO app to control your fan via smartphone or integrate with voice assistants like Alexa and Google Assistant.

DREO Tower Fan controlled via smartphone app interface.

A smartphone screen displaying the DREO app interface, demonstrating remote control capabilities for the tower fan.

Modes and Speed Settings

The fan features 9 speed settings and 4 operating modes:

  • Normal Mode: Provides a constant airflow at your selected speed.
  • Natural Mode: Simulates natural breeze by cycling through various speeds.
  • Sleep Mode: Operates at a low, quiet speed with the display dimmed for undisturbed sleep.
  • Auto Mode: Adjusts fan speed automatically based on the ambient room temperature.
DREO Tower Fan display showing different modes: Normal, Natural, Sleep, Auto.

The fan's display indicating the selection of various operating modes, including Normal, Natural, Sleep, and Auto.

Oscillation

The fan offers 90° oscillation to distribute air widely. Oscillation angles can be adjusted via the DREO app.

DREO Tower Fan demonstrating 90-degree oscillation for wide coverage.

The tower fan oscillating 90 degrees, showing its ability to distribute air across a broad area.

Timer

Set the fan to automatically turn off after 1 to 12 hours using the timer function.

Video highlighting the quiet operation and smart functionalities, such as 9 speeds and multiple modes, of the DREO DC Tower Fan, ideal for bedrooms and home offices.

Maintenance

Regular cleaning ensures optimal performance and longevity of your fan.

Cleaning the Rear Grille and Impeller

  1. Unplug the fan from the power outlet.
  2. Remove the screw at the bottom of the rear grille.
  3. Pull down the grille and carefully take it out.
  4. Unscrew the lock at the bottom of the impeller.
  5. Lift the impeller and take it out from the bottom.
  6. Wash the grille and impeller with water and mild soap. Ensure they are completely dry before reassembly.
  7. Reassemble the fan by aligning the shaft with the hole on the top of the fan cavity and pushing upwards. Align the slot on the bottom of the impeller with the motor shaft (ensure the lock thread faces outwards). Screw the impeller lock until tight.
  8. Place the grille back from the bottom, lift it into place, and screw the grille until tight.
Detached grille and impeller of DREO Tower Fan being cleaned under running water.

The removable rear grille and impeller of the DREO Tower Fan shown being cleaned under running water, highlighting easy maintenance.

General Cleaning

  • Use a soft, dry cloth to wipe the exterior surfaces of the fan.
  • Do not use abrasive cleaners or solvents as they may damage the surface.

Troubleshooting

If you encounter any issues, refer to the following common problems and solutions.

ProblemPossible CauseSolution
Fan does not turn onNo power supply; Power cord not properly plugged in; Remote control battery depleted.Check power outlet; Ensure power cord is securely plugged in; Replace remote control battery.
Weak airflowAir inlet/outlet blocked; Fan grilles or impeller are dirty.Ensure no obstructions; Clean the rear grille and impeller as per maintenance instructions.
Fan is noisyFan not on a level surface; Internal components are dirty.Place fan on a stable, level surface; Clean the impeller and grilles.
Remote control not workingBattery depleted; Obstruction between remote and fan.Replace remote control battery; Ensure clear line of sight to the fan's receiver.
App control issuesWi-Fi connectivity issues; Incorrect app settings.Check Wi-Fi connection; Refer to the DREO app's help section or online support.

Specifications

Technical details of your DREO Tower Fan.

FeatureDetail
Model NameDR-HTF009S
Dimensions (D x W x H)13"D x 13"W x 42"H
Weight9.8 Pounds
Power SourceDC
Voltage120.0V
Wattage30 watts
Number of Speeds9
ModesNormal, Natural, Sleep, Auto
Oscillation90 degrees
Noise Level20 Decibels (minimum)
Air Flow Capacity1397 Cubic Feet Per Minute
Speed28 Feet Per Second (maximum)
Timer12 hours
Control MethodApp, Remote, Touch, Voice
MaterialPlastic, Stainless Steel
CertificationsETL, FCC, UL
DREO Tower Fan dimensions: 42.52 inches height, 12.72 inches width, 12.72 inches depth.

A diagram illustrating the precise dimensions of the DREO Tower Fan, including its height, width, and depth.

Warranty and Support

DREO provides a warranty for this product. For detailed warranty information, please refer to the warranty card included in your package or visit the official DREO website. If you have any questions or require technical assistance, please contact DREO customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.