Introduction
Thank you for choosing the Outdoor Tech Orbit Bluetooth Headphones. These over-the-ear headphones are designed to provide a high-quality audio experience with active noise cancellation, offering both wired and wireless connectivity. They are suitable for various activities including music listening, phone calls, and travel.
This manual provides detailed instructions on setting up, operating, and maintaining your Orbit headphones to ensure optimal performance and longevity.
What's in the Box
- Outdoor Tech Orbit Bluetooth Headphones
- USB-C Charging Cable
- 3.5mm Audio Cable
- Carrying Case
- User Manual (this document)
Figure 1: Included components of the Outdoor Tech Orbit Headphones.
Setup
Charging the Headphones
Before first use, fully charge your Orbit headphones. A full charge takes approximately 2 hours.
- Connect the small end of the USB-C charging cable to the USB-C port on the headphone earcup.
- Connect the large end of the USB-C cable to a USB power source (e.g., computer USB port, wall adapter).
- The LED indicator on the headphones will show charging status (refer to the LED indicator section for details).
Bluetooth Pairing
To connect your Orbit headphones wirelessly to a device:
- Ensure the headphones are charged and powered off.
- Press and hold the Power button on the headphones until the LED indicator flashes blue and red, indicating pairing mode.
- On your device (smartphone, laptop, etc.), enable Bluetooth and search for available devices.
- Select "Outdoor Tech Orbit" from the list of found devices.
- Once connected, the LED indicator will turn solid blue or flash blue slowly (refer to the LED indicator section for details).
The headphones will automatically attempt to reconnect to the last paired device when powered on.
Operating Instructions
Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds.
- Power Off: Press and hold the Power button for approximately 5 seconds.
Controls
The Orbit headphones feature intuitive controls located on the earcups for easy management of audio and calls.
Figure 2: Earcup controls for the Orbit Headphones.
| Function | Action |
|---|---|
| Play/Pause | Single press the Multi-function button. |
| Volume Up | Short press the Volume + button. |
| Volume Down | Short press the Volume - button. |
| Next Track | Long press the Volume + button. |
| Previous Track | Long press the Volume - button. |
| Answer/End Call | Single press the Multi-function button. |
| Reject Call | Long press the Multi-function button. |
| Activate Voice Assistant | Double press the Multi-function button. |
| Active Noise Cancellation (ANC) On/Off | Press the ANC button. |
Active Noise Cancellation (ANC)
The Orbit headphones feature Active Noise Cancellation to reduce ambient noise. Press the dedicated ANC button to toggle this feature on or off. When ANC is active, you will experience a significant reduction in surrounding sounds, enhancing your listening experience.
Wired Connection
For situations where Bluetooth is not available or preferred, you can use the included 3.5mm audio cable.
- Plug one end of the 3.5mm audio cable into the audio jack on the headphone earcup.
- Plug the other end into the audio output of your device.
- The headphones will automatically switch to wired mode. Note that some features like ANC may still function in wired mode, depending on battery level.
Outdoor Tech Sound Adapt App
Enhance your audio experience by downloading the Outdoor Tech Sound Adapt app. This app allows you to customize sound equalization (EQ) settings via TruTone Audio, tailoring the sound profile to your personal preferences.
Learn more about the Sound Adapt App
Video: An overview of the Outdoor Tech Orbit Headphones, highlighting key features such as premium ANC, wired and wireless connection, oversized drivers, and gaming mode for low latency. The video also showcases the 55-hour playtime, TruTone technology for customized sound EQ, swivel and foldable function for travel, and the included rigid case.
Maintenance
Cleaning
- Use a soft, dry cloth to clean the exterior of the headphones.
- Do not use abrasive cleaners, solvents, or spray directly onto the headphones.
- Gently wipe the earpads with a slightly damp cloth if necessary, then dry thoroughly.
Storage
When not in use, store your Orbit headphones in the provided carrying case to protect them from dust, scratches, and impacts.
Figure 3: Orbit headphones stored in their carrying case.
Avoid storing the headphones in extreme temperatures or high humidity.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Headphones won't turn on. | Ensure the headphones are fully charged. Connect to a power source using the USB-C cable. |
| Cannot pair via Bluetooth. |
|
| No sound or low volume. |
|
| Active Noise Cancellation (ANC) not working. | Ensure the ANC button has been pressed to activate the feature. Check battery level. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Orbit |
| Model Number | OT5903 |
| Connectivity | Bluetooth Wireless, 3.5mm Wired |
| Wireless Technology | Bluetooth |
| Noise Control | Active Noise Cancellation (ANC) |
| Earpiece Shape | Over-Ear |
| Battery Life (Wireless) | Up to 12 hours playtime |
| Standby Time | Up to 60 hours |
| Charging Time | Approximately 2 hours |
| Material | Plastic |
| Color | Black |
| Weight | 1.19 pounds |
| Water Resistance | Not Water Resistant |
| Compatible Devices | Smartphones, Laptops, Desktops, Tablets, Media Players |
Figure 4: Physical dimensions and weight of the Orbit Headphones.
Warranty and Support
Outdoor Tech products are designed for durability and performance. For warranty information and customer support, please visit the official Outdoor Tech website or contact their customer service directly.
Please retain your proof of purchase for any warranty claims.
