Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Casanoov VOGEL 1x1.2m Anthracite Grey Aluminum Garden Gate. Please read all instructions carefully before beginning installation to ensure safe and correct usage.
The VOGEL gate is designed for modern aesthetics and practicality, featuring spaced slats that allow light to pass through while maintaining privacy. Its robust aluminum structure is powder-coated for durability and resistance to weather and corrosion.
1. Setup and Installation
Before starting, ensure you have all components listed in the kit. A clear installation guide is included to facilitate quick assembly.
1.1. Package Contents
- 5 powder-coated aluminum blades
- 1 reinforced blade (for potential motorization)
- Hinges
- Barrel lock
- Black handle
- 5 keys
- Finishing covers
- Gate stop
- All necessary screws
For detailed visual instructions, please refer to the official installation manual available as a PDF: Download Installation Manual (PDF).
1.2. Dimensions and Site Preparation
The gate measures 100 cm (width) x 120 cm (height). It requires a space of 103 cm between pillars for proper installation. Ensure the minimum height of your pillars is 140 cm.
The opening direction is reversible, offering flexibility during installation. Plan the gate's swing direction before mounting.
Figure 1: Detailed dimensions and included components for the VOGEL gate. This diagram illustrates the gate's overall size, the required pillar spacing, and a breakdown of parts like blades, hinges, and lock mechanism.
Figure 2: The Casanoov VOGEL gate installed between two pillars, providing a secure and aesthetically pleasing entrance to a property.
Figure 3: Side profile of the VOGEL gate, highlighting its slim design and the spacing between the horizontal slats.
Figure 4: Technical drawing showing a cross-section of the gate's frame, detailing material thickness and structural elements.
Figure 5: Technical drawing illustrating a cross-section of one of the gate's aluminum blades, showing its internal structure and dimensions.
Figure 6: Technical drawing showing a cross-section of a gate blade with an attached finishing cover, detailing how components fit together.
1.3. Assembly Steps (Summary)
- Unpack all components and verify against the parts list.
- Assemble the gate frame according to the provided diagram.
- Insert the aluminum blades into the frame, ensuring correct orientation.
- Install the hinges onto the gate and the prepared pillars.
- Mount the barrel lock and black handle.
- Adjust the gate for smooth opening and closing.
- Secure all finishing covers and the gate stop.
Note: A power drill may be required to pre-drill holes in metal components for secure fastening.
2. Operating Instructions
The Casanoov VOGEL gate is designed for simple manual operation.
2.1. Opening and Closing
- To open: Turn the handle to disengage the latch, then push or pull the gate in the desired direction.
- To close: Guide the gate until it meets the gate stop, then turn the handle to engage the latch.
2.2. Locking
Use one of the provided keys to lock the barrel lock mechanism for enhanced security. Ensure the gate is fully closed and the latch is engaged before locking.
Figure 7: A close-up view of the black handle and barrel lock mechanism on the VOGEL gate, showing the keyhole for locking.
3. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your aluminum gate.
3.1. Cleaning
- Clean the aluminum surfaces with mild soap and water.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the powder coating.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
3.2. Hardware Check
- Periodically check all screws, hinges, and the lock mechanism for tightness.
- Lubricate hinges and the lock cylinder annually with a silicone-based lubricant to ensure smooth operation.
- Inspect for any signs of wear or damage and address them promptly.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate does not open/close smoothly. | Misaligned hinges, debris in hinges, lack of lubrication. | Check hinge alignment, clean hinges, apply lubricant. |
| Lock mechanism is stiff or not working. | Lack of lubrication, internal damage, debris. | Lubricate the lock cylinder. If the issue persists, contact customer support for a replacement part. |
| Gate appears to be installed in the wrong opening direction. | Incorrect initial assembly for desired swing. | The gate is designed to be reversible. Refer to the installation manual for instructions on reversing the opening direction. If a specific "reversibility kit" is mentioned by the manufacturer, it may be required for certain configurations. |
| Missing components upon delivery. | Packaging error. | Contact Casanoov customer service immediately with your order details. |
5. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Casanoov |
| Model Number | STW-000036 (VOGEL 100P120) |
| Material | Aluminum |
| Color | Anthracite Grey (RAL 7016) |
| Product Dimensions (L x W) | 125 cm x 100 cm (Actual gate: 100 cm width x 120 cm height) |
| Required Pillar Spacing | 103 cm |
| Minimum Pillar Height | 140 cm |
| Assembly Required | Yes |
| Weight | Approximately 16 kg |
| Wind Resistance | Up to 60 km/h (due to open-slat design) |
| Country of Origin | China |
6. Warranty and Support
Casanoov is committed to providing a serene and satisfying purchasing experience.
6.1. Customer Service
Our after-sales service team, based in France, is available to answer your questions and provide assistance. We ensure secure delivery, availability of spare parts if needed, and post-purchase follow-up.
For any inquiries, missing parts, or technical support, please contact Casanoov customer service through your purchase platform or the official Casanoov website.
6.2. Warranty Information
This product is covered by legal guarantees. Please retain your proof of purchase for warranty claims.
