Important Safety Information
Always follow the assembly instructions carefully to prevent instability or injury.
Be cautious when handling sharp edges and avoid overloading the bed frame beyond its recommended capacity of 1,000 pounds.
Ensure all connections are secure before use.
Keep small parts away from children during assembly.
Package Contents
Verify that all parts and hardware are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Included Components
- Headboard with integrated storage and charging station
- Metal Bed Frame components
- Metal Slats
- LED Light Strip with remote control
- Installation Manual
- All necessary screws, washers, and tools (e.g., Allen wrench)
Setup & Assembly
Follow the step-by-step instructions below for proper assembly. It is recommended to assemble the bed frame with two people.
Step 1: Assemble the Headboard Charging Station
Install the charging station into the designated slot on the headboard panel. Secure it with the provided screws.
Step 2: Attach Headboard Frame Components
Connect the main headboard frame pieces using the provided hardware. Ensure all connections are finger-tight initially.
Step 3: Install LED Light Strip
Carefully attach the LED light strip to the underside of the headboard's top shelf. Ensure it is securely adhered and the wiring is neatly tucked away.
Step 4: Assemble Bed Frame Side Rails and Support Legs
Connect the side rails to the headboard and footboard. Attach the central support legs and ensure they are stable.
Step 5: Install Metal Slats
Place the metal slats across the bed frame. The noise-free design includes EVA mute stickers to prevent creaking. Ensure all slats are properly seated and secured.
Step 6: Final Tightening
Once all components are in place, fully tighten all screws using the provided Allen wrench. Do not overtighten.
Operating Instructions
Charging Station
The headboard features a built-in charging station with 2 standard outlets, 1 USB port, and 1 Type-C port. Simply plug your devices into the appropriate ports for convenient charging.
LED Lights
The multi-color RGB LED light strips can be controlled via a phone app or the included remote control.
- Use the remote to change colors, adjust brightness, and select modes (e.g., dynamic, music sync).
- Download the compatible app (refer to the headboard for QR code or app name) for extended control options, including over 60,000 colors and timer settings.
Maintenance & Care
To maintain the appearance and longevity of your bed frame, follow these simple care instructions:
- Wipe the wood surfaces with a dry cloth to remove dust and spills. Avoid abrasive cleaners.
- Regularly check all screws and connections to ensure they remain tight. Tighten if necessary.
- The metal frame is treated for rust resistance; however, avoid prolonged exposure to moisture.
Troubleshooting
Squeaking Noises
Ensure all screws are tightly fastened. The bed frame is designed with EVA mute stickers on the slats to prevent noise. If squeaking persists, recheck slat placement and connections.
Mattress Sliding
The bed frame features an embedded design to hold the mattress in place. Ensure the mattress is correctly positioned within the frame's edges.
LED Lights Not Working
Check if the power cord for the LED lights is securely plugged into a working outlet and into the headboard. Ensure the remote control has working batteries.
Specifications
- Model: LEDH05-01
- Size: Full
- Product Dimensions: 82.7"L x 54.1"W x 40"H
- Weight Capacity: Up to 1,000 pounds
- Material: Iron Alloy (frame), Wood (headboard)
- Finish: Powder Coated (metal), Rustic Brown (wood)
- Special Features: Charging Station (2 AC outlets, 1 USB, 1 Type-C), Multi-color RGB LED Lighting, Noise-Free Metal Slats, No Box Spring Needed, Under-bed Clearance (10.4 inches)
- Assembly Required: Yes
Warranty & Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the LOEWAY official website.