Tecnock Remote Control Car, Transform Dinosaur Robot User Manual

Introduction

Thank you for purchasing the Tecnock Remote Control Car, Transform Dinosaur Robot. This innovative toy combines the excitement of a remote control car with the dynamic transformation into a dinosaur robot. Designed for engaging play, it features one-button transformation, 360-degree rotation capabilities, and a long-lasting rechargeable battery. Please read this manual thoroughly to ensure proper setup, operation, and maintenance for optimal performance and enjoyment.

Image: The Tecnock Remote Control Car displayed in its car form (front) and transformed robot form (back), alongside its remote control. This illustrates the product's dual functionality.

What's in the Box

Verify that all components are present in the package:

• 1 x Tecnock Remote Control Car / Transform Dinosaur Robot
• 1 x Remote Control
• 1 x Rechargeable Lithium Ion Battery (for the car)
• 1 x USB Charging Cable
• 1 x Small Screwdriver (for battery compartment)
• 1 x User Manual (this document)

Image: A visual representation of the product's dimensions in both car and robot modes, along with an illustration of all included accessories: the remote control, a screwdriver, the 3.7V 500mAh battery, a charging cable, and the user manual.

Setup

Battery Installation

1. For the Remote Control:
   • Locate the battery compartment on the back of the remote control.
   • Use the included screwdriver to open the battery cover.
   • Insert 2 x AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
   • Replace the battery cover and secure it with the screw.
2. For the Remote Control Car:
   • Locate the battery compartment on the underside of the car.
   • Use the included screwdriver to open the battery cover.
   • Connect the included rechargeable Lithium Ion battery to the car's battery connector.
   • Place the battery neatly inside the compartment.
   • Replace the battery cover and secure it with the screw.

Charging the Car Battery

The car's battery provides approximately 70 minutes of playtime on a full charge.

1. Ensure the car's power switch is in the OFF position.
2. Connect the USB charging cable to the car's battery port.
3. Plug the other end of the USB charging cable into a standard USB power adapter (e.g., computer USB port, wall charger, power bank).
4. The charging indicator light on the cable will illuminate during charging and turn off or change color when fully charged (refer to cable instructions if specific light behavior is not observed).
5. Charging typically takes 1-2 hours. Do not overcharge the battery.
6. Once fully charged, disconnect the charging cable from both the car and the power source.

Image: The Tecnock Remote Control Car in its car form, depicted in a dynamic setting, highlighting its 70-minute run time with a rechargeable battery. Icons represent key features: one-key deformation, 360-degree rotation, 2.4GHz remote, and extended battery life.

Operating Instructions

Powering On/Off

• To turn on the car, slide the power switch located on the underside of the car to the ON position. The car's lights will illuminate.
• To turn on the remote control, slide its power switch to the ON position. An indicator light on the remote will turn on.
• To turn off, slide both switches to the OFF position.

Remote Control Functions

Familiarize yourself with the remote control layout:

• Left Joystick: Controls forward and backward movement.
• Right Joystick: Controls left and right turning.
• One-Button Transformation: Press the designated transformation button (often labeled with a car/robot icon) to switch between car and robot modes.
• 360-Degree Rotation/Drift: Specific button or combination of joystick movements may activate these stunts. Refer to the remote's markings for precise controls.

Image: The Tecnock Remote Control Car in various stages of transformation, from car to robot, emphasizing its 'One-Click Deformation' feature and ability to perform '360° Rotation' stunts.

Multiplayer Operation (2.4GHz)

The 2.4GHz remote control system allows multiple Tecnock cars to be operated simultaneously without interference. This is ideal for races and group play.

• Ensure each car and its corresponding remote are paired correctly before starting multiplayer play.
• Typically, turning on the car first, then the remote, will automatically pair them. If issues arise, turn both off and try again.

Image: A child and an adult are shown enjoying the Tecnock Remote Control Car, with one car in robot mode and another in car mode, illustrating the 2.4GHz interference-free operation for multiple players.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the car and remote control. Do not use water or cleaning solvents, as this may damage the electronic components.
• Storage: When not in use for extended periods, remove all batteries from both the car and the remote control to prevent leakage and corrosion. Store the toy in a cool, dry place away from direct sunlight.
• Battery Care: Always fully charge the car's battery before first use and after each play session. Do not leave batteries charging unattended.
• Avoid Impacts: While durable, avoid severe impacts or drops, as this can damage internal mechanisms or external casing.

Troubleshooting

Specifications

Warranty and Support

Tecnock products are manufactured to high-quality standards. For any questions, technical support, or warranty inquiries, please contact Tecnock customer service through your original purchase platform or the official Tecnock website. Please have your model number (8889) and purchase details ready when contacting support.