ODK B040104
ODK Gaming Desk User Manual
Model: B040104 | Brand: ODK
Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your ODK Gaming Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Figure 1: ODK Gaming Desk, showcasing its integrated monitor stand, LED lighting, and accessories.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Follow assembly instructions carefully. Do not overtighten screws.
- Keep small parts away from children to prevent choking hazards.
- Do not exceed the maximum weight capacity of the desk.
- Place the desk on a level surface to prevent instability.
- Disconnect power before cleaning or moving the desk.
Package Contents
Verify that all the following components are included in your package:
- Desk tabletop (main piece)
- Monitor stand shelf
- Desk legs (T-shaped design)
- Integrated power strip with 3 AC outlets and 2 USB ports
- LED lighting strips
- RGB light controller
- Headphone hook
- Cup holder
- Assembly hardware (screws, bolts, Allen wrench)
- Instruction manual
Setup and Assembly
This gaming desk is designed for quick and straightforward installation. Follow the steps below for assembly.
1. Unpack and Identify Components
Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list to ensure all components are present.

Figure 2: Desk dimensions. The desk measures 80cm (length) x 50cm (width) x 88.1cm (height). The monitor stand is 80cm long and 18.8cm deep, positioned 13.2cm above the main desk surface.
2. Assemble the Desk Frame
Attach the T-shaped desk legs to the main tabletop using the provided screws and tools. Ensure all connections are secure but do not overtighten until the desk is fully assembled and leveled.
3. Install the Monitor Stand
Secure the monitor stand shelf to the designated mounting points on the main tabletop. This stand is designed to accommodate multiple monitors and accessories, promoting a comfortable posture.

Figure 3: The full-size monitor shelf provides ample space for monitors and helps maintain proper seating posture compared to desks without a raised shelf.
4. Attach Accessories
Install the headphone hook and cup holder to the sides of the desk as desired. These are designed for convenience and organization.

Figure 4: The integrated headphone hook and cup holder offer convenient storage solutions for your gaming setup.
Operating Instructions
1. Power and LED Lighting
The desk features an integrated power strip and LED lighting system. Connect the desk's power cable to a standard wall outlet.

Figure 5: The integrated power strip includes 3 AC outlets (220-250V/16A) and 2 USB ports (5V/2A) for convenient device charging.

Figure 6: The LED lighting offers 7 lighting modes, 10 bright colors, and 20 dynamic modes to customize your gaming atmosphere.

Figure 7: The RGB lights controller allows you to switch between static colors (C button), dynamic modes (M button), and adjust brightness/speed (ON/OFF button).
- Power Outlets: Use the 3 AC outlets and 2 USB ports to power and charge your devices.
- LED Control: Use the included RGB light controller to cycle through 7 lighting modes, 10 bright colors, and 20 dynamic modes.
- Controller Functions:
- C Button: Static Color selection.
- M Button: Dynamic Mode selection.
- ON/OFF Button: Power on/off, also used to increase speed/brightness in dynamic modes.
Maintenance
- Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cable Management: Regularly check and organize cables to prevent tangles and damage.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk is wobbly/unstable. | Uneven floor; loose fasteners. | Ensure desk is on a level surface. Tighten all assembly screws. |
| LED lights not working. | Power cable disconnected; controller issue. | Check if the desk is plugged in. Ensure the LED strip is properly connected to the controller. Try pressing the ON/OFF button on the controller. |
| Power outlets/USB ports not working. | Desk not plugged in; power surge. | Verify the desk's power cable is securely plugged into a working wall outlet. Check if the wall outlet itself is functional. |
Specifications
| Brand | ODK |
| Model Number | B040104 |
| Dimensions (L x W x H) | 80 cm x 50 cm x 88.1 cm (31.5 in x 19.7 in x 34.7 in) |
| Weight | 9.6 kg (21.2 lbs) |
| Color | Black |
| Power Outlets | 3 x AC (220-250V/16A) |
| USB Ports | 2 x USB (5V/2A) |
| LED Lighting | 20 dynamic modes, 10 bright colors, 7 lighting modes |
| Assembly Required | Yes |
| Included Components | Integrated USB port, Headphone hook, Cup holder |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact ODK customer service directly. Keep your purchase receipt for warranty claims.
For further assistance, please visit the official ODK website or contact their support team.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.