Introduction
This manual provides detailed instructions for the safe and effective use of your KEMEI Professional Hair Clippers and Trimmer Set (models PG2290D and PG2293). Please read this manual thoroughly before first use and retain it for future reference.
Image: KEMEI Professional Hair Clippers (left) and Trimmer (right) with charging base.
Safety Information
- Avoid contact with eyes.
- Do not use the device while charging.
- Keep away from heat sources and open flames.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Package Contents
Your KEMEI Hair Clippers Set includes the following items:
- 1x Main Hair Clipper (PG2290D)
- 1x Hair Trimmer (PG2293)
- 6x Guide Combs for Main Clipper (1mm, 2mm, 3mm, 4mm, 10mm, 13mm)
- 3x Guide Combs for Trimmer (1mm, 2mm, 3mm)
- 1x Charging Base (for main clipper)
- 1x USB Charging Cable
- 1x Cleaning Brush
- 1x Lubricating Oil
- User Manual
Image: Overview of the KEMEI Hair Clippers and Trimmer Set, including accessories.
Setup
1. Initial Charging
Before first use, fully charge both the main clipper and the trimmer. Connect the USB charging cable to the respective charging port on each device or use the charging base for the main clipper. A full charge takes approximately 90 minutes for the main clipper and provides up to 300 minutes of runtime. The trimmer battery lasts for 120 minutes.
Image: Illustration showing the main clipper and trimmer charging, with battery indicators.
2. Attaching Guide Combs
Select the desired guide comb for your preferred hair length. Align the comb with the clipper blade and push it firmly until it clicks into place. Ensure the comb is securely attached before operating the device.
- Main Clipper Combs: 1mm, 2mm, 3mm, 4mm, 10mm, 13mm
- Trimmer Combs: 1mm, 2mm, 3mm
Image: KEMEI Hair Clipper with various guide combs for different cutting lengths.
Operating Instructions
1. Powering On/Off
Press the power button located on the device to turn it on. Press the button again to turn it off. The LCD display will show the battery percentage and other reminders.
Image: Close-up of KEMEI Hair Clippers showing the digital LCD display with battery percentage and reminder icons.
2. Adjusting Blade Length (Main Clipper)
The main clipper features a taper lever on the side. Use this lever to fine-tune the blade length for precise cutting and blending, even when a guide comb is attached.
3. Hair Cutting
Ensure hair is clean and dry before cutting. For best results, cut against the direction of hair growth. Use smooth, even strokes. Start with a longer guide comb and gradually switch to shorter ones if a closer cut is desired.
Video: Demonstration of the KEMEI Professional Hair Clippers Set for Men, showcasing its features and use.
Maintenance
1. Cleaning the Blades
After each use, turn off the device and remove the guide comb. Use the provided cleaning brush to remove any loose hairs from the blades. For a more thorough cleaning, the blades can be carefully detached and rinsed under running water. Ensure blades are completely dry before reattaching.
2. Oiling the Blades
Regular oiling ensures optimal performance and extends blade life. Apply a few drops of the provided lubricating oil to the blades after cleaning, especially if the LCD display shows an oil reminder. Turn on the clipper for a few seconds to distribute the oil evenly.
Image: Internal view of KEMEI Hair Clippers highlighting the powerful motor, which benefits from proper maintenance.
3. Storage
Store the clippers and all accessories in their original case in a cool, dry place, away from direct sunlight and moisture. Keep out of reach of children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or device not charged. | Charge the device fully. Ensure charging cable is properly connected. |
| Poor cutting performance. | Blades are dull, dirty, or not oiled. | Clean and oil the blades. If blades are dull, consider professional sharpening or replacement. |
| Device pulls hair. | Blades are dirty, not oiled, or hair is not dry. | Clean and oil blades. Ensure hair is dry before cutting. Cut against the direction of hair growth. |
| Excessive noise or vibration. | Blades may be misaligned or require oiling. | Check blade alignment. Apply lubricating oil to the blades. |
Specifications
- Product Dimensions: 7.48 x 2.36 x 1.57 inches; 1.22 Pounds
- Item Model Number: KM-PG2290D/2293/PG2290D+2293
- Batteries: 1 Lithium Ion battery required (included)
- Charging Time: 90 minutes (main clipper)
- Runtime: Up to 300 minutes (main clipper), 120 minutes (trimmer)
- Power Source: Battery Powered
- Blade Material: Stainless Steel
- Manufacturer: KEMEI
Warranty
KEMEI products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included in your product packaging or contact KEMEI customer support.
Support
For further assistance, product inquiries, or technical support, please visit the official KEMEI website or contact their customer service department. Contact information can typically be found on the product packaging or the official brand website.