1. Introduction
This manual provides essential instructions for the proper use and maintenance of your SANSUI W6 True Wireless Earbuds. Please read this guide thoroughly before using the product to ensure optimal performance and longevity.
1.1 Package Contents
Verify that all items are present in your package:
- SANSUI W6 Earbuds (x2)
- Charging Case (x1)
- USB-C Charging Cable (x1)
- User Manual (x1)
Image: Contents of the SANSUI W6 Earbuds package.
2. Safety Information
- Do not disassemble or modify the product.
- Keep the earbuds and charging case away from extreme temperatures, direct sunlight, and moisture.
- Avoid prolonged exposure to high volume levels to prevent hearing damage.
- Use only the provided charging cable or a certified USB-C cable for charging.
- Dispose of the product and its batteries responsibly according to local regulations.
3. Getting Started (Setup)
3.1 Initial Charging
- Place both earbuds into the charging case.
- Connect the USB-C charging cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port).
- The LED indicator on the charging case will show charging status. A full charge typically takes about 1 hour.
- The charging case has a 300mAh battery capacity, providing multiple charges for the earbuds.
3.2 Bluetooth Pairing
The SANSUI W6 earbuds feature Bluetooth 5.4 for enhanced connectivity and low latency.
Image: Benefits of Bluetooth 5.4 technology.
- Ensure the earbuds are charged and inside the charging case.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED on the earbuds.
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for available Bluetooth devices and select "SANSUI W6" from the list.
- Once connected, the earbud LEDs will stop flashing, and you will hear a confirmation tone.
- The earbuds will automatically reconnect to the last paired device when removed from the case, if Bluetooth is enabled on the device.
4. Operation
4.1 Wearing the Earbuds
The SANSUI W6 earbuds are designed for an ergonomic and comfortable fit, weighing approximately 3.0g each.
Image: Ergonomic design and comfortable fit of the earbuds.
- Identify the left (L) and right (R) earbuds.
- Gently insert each earbud into your ear canal, twisting slightly to find a secure and comfortable position.
- Ensure the earbud stem points downwards.
4.2 Touch Controls
The earbuds feature intuitive touch controls for various functions:
Image: SANSUI W6 Earbuds Touch Control Functions.
| Function | Action |
|---|---|
| Play/Pause Music | Double tap either earbud |
| Previous Song | Triple tap left earbud |
| Next Song | Triple tap right earbud |
| Activate Voice Assistant | Press & hold left earbud for 2 seconds |
| Answer/Hang Up Call | Double tap either earbud |
| Reject Call | Press & hold either earbud for 2 seconds |
| Game/Music Mode | Press right earbud for 2 seconds |
4.3 Audio Quality and Game Mode
The W6 earbuds are equipped with 13mm dynamic drivers for clear audio. They also feature a low-latency mode suitable for gaming.
Image: Internal structure of the earbud driver.
Image: Low latency feature for gaming.
5. Maintenance
5.1 Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove any earwax or debris from the earbud mesh and charging contacts using a dry cotton swab or a small, soft brush.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
5.2 Water Resistance (IPX7)
The SANSUI W6 earbuds are IPX7 water-resistant, meaning they can withstand immersion in water up to 1 meter for 30 minutes. This makes them suitable for workouts and light rain, but they are not recommended for swimming or showering.
- Ensure the earbuds are completely dry before placing them back into the charging case to prevent damage to the charging contacts.
- The charging case is not water-resistant.
5.3 Storage
When not in use, store the earbuds in their charging case to protect them and keep them charged. Store the case in a cool, dry place.
6. Troubleshooting
If you encounter issues with your SANSUI W6 earbuds, refer to the following common solutions:
| Problem | Solution |
|---|---|
| Earbuds not pairing |
|
| Only one earbud working |
|
| No sound or low volume |
|
| Charging case not charging |
|
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | W6 |
| Bluetooth Version | 5.4 |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Audio Driver Size | 13 mm |
| Frequency Range | 20 Hz - 20,000 Hz |
| Impedance | 32 Ohm |
| Earbud Battery Life | Up to 6 hours (single charge) |
| Total Playtime (with case) | Up to 30 hours |
| Charging Case Capacity | 300 mAh |
| Charging Time | Approx. 1 hour (earbuds & case) |
| Water Resistance | IPX7 (Earbuds only) |
| Earbud Weight | Approx. 3.0 grams each |
| Charging Case Dimensions | 57.5 x 49.5 x 23.5 mm |
| Control Type | Touch |
| Compatible Devices | Cellphones, Desktops, Laptops, Tablets |
8. Warranty and Support
8.1 Warranty Information
SANSUI products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official SANSUI website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase.
8.2 Customer Support
For technical assistance, troubleshooting, or any product-related inquiries, please contact SANSUI customer support through their official website or the contact information provided in your product packaging.
