Introduction
This manual provides instructions for the PlusAcc Battery Base, Model E11-A, designed to enhance the portability and functionality of your Spot device. This 5000mAh portable charger stand allows you to power your Spot device wirelessly and also features a USB-C output port for charging other compatible devices. Enjoy extended sound playback and the flexibility to use your Spot in various locations.
What's in the Box
- PlusAcc Battery Base (Model E11-A)
- User Manual
Note: The Spot device, charging cable, and power adapter are not included.
Image: The retail box for the PlusAcc Battery Base, displaying the battery base and the included user manual. The Spot device, charging cable, and power adapter are explicitly noted as not included.
Compatibility
The PlusAcc Battery Base is specifically designed for the Spot device. It is also compatible with various USB-C powered devices such as smartphones, earbuds, tablets, and smartwatches, allowing for simultaneous charging.
- Compatible with: Spot, iPhone, Samsung, Motorola Moto, and other USB-C powered devices.
- Not compatible with: Pop, Dot 4th/5th generation, or other non-Spot devices.
Image: A visual guide illustrating that the battery base is compatible with Spot devices, cellphones, and earphones, but not with Pop or Dot 4th/5th generation devices.
Setup and Installation
Follow these steps to correctly install your Spot device onto the PlusAcc Battery Base:
- Step 1: Lay the bottom of your Spot device flat. Align the edge of the Spot with the inside snaps of the battery base.
- Step 2: Gently press down on the back of the Spot device until you hear a "click" sound. This indicates that the device is securely attached.
- Step 3: Gently shake the bracket to confirm the Spot is firmly attached to the battery base.
Image: Detailed steps for installing the Spot device onto the battery base, showing alignment and the final click to secure it.
Video: A short demonstration on how to correctly install the Spot device onto the battery base and how to remove it.
Operating Instructions
Charging the Battery Base
To charge the PlusAcc Battery Base, use the original power adapter and charging cable that came with your Spot device. Connect the adapter to the battery base's input port. The LED indicators on the base will show the charging status.
Important: Always use the original adapter for your Spot speaker to charge the stand.
Image: The battery base being charged using the original Spot adapter, highlighting the importance of using the correct power source.
Powering On/Off and Battery Indicators
Press the power button on the front of the battery base to turn it on or off. The four LED lights indicate the remaining battery charge:
- One light: 0-25% charge
- Two lights: 25-50% charge
- Three lights: 50-75% charge
- Four lights: 75-100% charge
Using the USB-C Output Port
The battery base includes one USB-C output port (5V 1A) that can be used to charge other compatible devices such as smartphones, earbuds, or smartwatches. Simply connect your device to this port using a compatible USB-C cable.
Image: The battery base simultaneously powering a Spot device and charging a smartphone via its USB-C output port.
Video: A demonstration of the battery base powering a Spot device and charging a cellphone simultaneously.
Features
- Extended Battery Life: The 5000mAh battery provides up to 8 hours of portable playback (at 50% volume) and up to 13 hours of standby time. A full charge takes approximately 3 hours.
Image: Battery performance metrics for the 5000mAh battery base.
- Non-Destructive Sound Quality: The design of the battery holder ensures that it does not interfere with the sound quality of your Spot device, allowing for clear audio playback and voice command recognition.
Image: Visual representation of unaffected sound quality when the Spot is on the battery base.
- Enhanced Portability: Transform your Spot into a portable device, allowing you to move it freely between rooms or even outdoors.
Image: The battery base making the Spot device portable, shown being held in a hand.
- Non-Slip Bottom: Equipped with a non-slip pad on the bottom to ensure stability and prevent accidental sliding on various surfaces.
Maintenance
To ensure the longevity and optimal performance of your PlusAcc Battery Base, follow these maintenance guidelines:
- Keep the device clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Store the battery base in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping the device or subjecting it to strong impacts.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty and may cause damage.
Troubleshooting
If you encounter issues with your PlusAcc Battery Base, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery Base not charging. | Incorrect power adapter or cable; loose connection; power outlet issue. | Ensure you are using the original Spot power adapter and cable. Check all connections are secure. Try a different power outlet. |
| Spot device not powering on when attached. | Battery Base is off; low battery charge; incorrect installation. | Press the power button on the battery base to turn it on. Charge the battery base. Re-install the Spot device, ensuring it clicks into place. |
| USB-C output not charging other devices. | Battery Base is off; low battery charge; incompatible device; faulty cable. | Ensure the battery base is on and has sufficient charge. Verify the connected device is USB-C compatible. Try a different USB-C cable. |
| Blue LED lights are too bright. | Intended design. | If used in a dark environment like a bedroom, consider placing a small piece of electrical tape over the LEDs if they are disruptive. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PlusAcc |
| Model Number | E11-A |
| Battery Capacity | 5000mAh |
| Hardware Interface | USB Type C |
| USB-C Output | 5V 1A |
| Input Voltage | 12 volts (from Spot adapter) |
| Compatible Devices | Spot, Smartphones, Earbuds, Smartwatches, etc. |
| Sound Playback Time | Up to 8 hours (at 50% volume) |
| Standby Time | Up to 13 hours |
Safety Information
Please read and follow these safety guidelines carefully:
- For external use only.
- Do not expose the device to water or excessive moisture.
- Avoid extreme temperatures, direct sunlight, and heat sources.
- Keep out of reach of children.
- Use only the specified charging adapter (original Spot adapter) to charge the battery base.
- Do not short-circuit the battery or dispose of it in fire.
Warranty and Support
The PlusAcc Battery Base (Model E11-A) comes with a 1-Year Warranty from the date of purchase.
For warranty claims, technical support, or any product-related inquiries, please contact PlusAcc customer service through the retailer where the product was purchased (e.g., Amazon.com). Please have your purchase details and model number (E11-A) ready.
You can also visit the official PlusAcc store on Amazon for more information: PlusAcc Store
