SUNMORY FL21022A Arc Floor Lamp User Manual

1. Introduction

Thank you for purchasing the SUNMORY FL21022A Arc Floor Lamp. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new lamp. Please read these instructions thoroughly before use and retain them for future reference.

Figure 1: SUNMORY Arc Floor Lamp with 3 Color Temperature options.

2. Important Safety Instructions

• Read all instructions: Before assembling or using this lamp, read and understand all safety and operating instructions.
• Electrical Safety: Ensure the power outlet voltage matches the lamp's requirements. Do not use with extension cords unless the cord can be fully inserted.
• Avoid Water: Do not use this lamp near water or in damp locations.
• Stable Placement: Always place the lamp on a firm, level surface to prevent tipping. The heavy base is designed for stability.
• Bulb Type: Use only the specified bulb type (E26, 9W LED, 800 lumens). Replacing with an incorrect bulb may cause damage or fire.
• Disconnect Power: Always unplug the lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
• Children and Pets: Keep the lamp out of reach of children and pets to prevent accidents.
• Ventilation: Ensure adequate air circulation around the lamp to prevent overheating.
• Damage: Do not operate the lamp if the cord or plug is damaged, or if the lamp has been dropped or damaged in any way. Contact customer support for assistance.

3. Assembly Instructions

Follow these steps to assemble your SUNMORY Arc Floor Lamp. It is recommended to assemble the lamp on a soft, clean surface to prevent scratches.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Ensure all components listed in the package contents are present.
2. Attach Lamp Poles: Connect the lamp pole sections by screwing them together clockwise. Each connection position uses a metal threaded interface. Ensure each pole is tightened securely to maintain stability.
3. Secure Base: Attach the assembled lamp pole to the heavy round base. The base is made of cast iron for stability.
4. Install Bulb: Screw the provided 9W A19 LED E26 bulb into the lamp socket. Do not overtighten.
5. Assemble Lampshade: Follow the instructions provided with the lampshade to assemble it. Typically, this involves attaching the fabric to the metal rings.
6. Attach Lampshade: Secure the assembled lampshade to the lamp head.
7. Position Lamp: Place the lamp in your desired location, ensuring the power cord can reach an outlet without being strained or creating a tripping hazard.

Figure 2: Lamp dimensions and bulb type.

Figure 3: Key features including adjustable lampshade and foot switch.

4. Operating Instructions

Your SUNMORY Arc Floor Lamp is designed for ease of use with adjustable lighting features.

• Power On/Off: Plug the lamp into a standard electrical outlet. Use the foot switch located on the power cord to turn the lamp ON or OFF.
• Adjusting Color Temperature: The included LED bulb offers three color temperature settings. Each press of the foot switch will cycle through the following temperatures:
  • 3000K Warm Light: For a cozy and relaxing ambiance.
  • 4000K Cool White Light: Ideal for general illumination and daily activities.
  • 5000K White Daylight: Bright and crisp light, suitable for tasks and reading.
  The lamp features a memory function that will recall your last selected color temperature setting when turned back on.
• Adjusting Lampshade: The lamp head can be rotated up to 350° horizontally and 180° vertically. Gently adjust the lampshade to direct light as needed. Note: To avoid damage, hold the topmost joint end of the lamp pole simultaneously when rotating the lamp head.

5. Maintenance

Proper care and maintenance will ensure the longevity and optimal performance of your lamp.

• Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the lamp pole and base. For the linen lampshade, a lint roller or a soft brush can be used to remove dust. Do not use abrasive cleaners or solvents.
• Bulb Replacement:
  1. Ensure the lamp is unplugged and the bulb has cooled down.
  2. Carefully unscrew the old E26 bulb from the socket.
  3. Screw in a new E26 base, 9W LED, 800 lumen bulb. Ensure it is securely fastened but do not overtighten.
• Cord Care: Regularly inspect the power cord for any signs of damage. Do not place heavy objects on the cord or run it under carpets.

6. Troubleshooting

If you encounter any issues with your lamp, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact SUNMORY customer support.

7. Specifications

8. Warranty and Support

SUNMORY products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or contact SUNMORY customer support.

If you have any questions, require technical assistance, or need to report a problem, please contact our customer support team through the retailer's platform or the official SUNMORY website. Please have your model number (FL21022A) and purchase date ready when contacting support.