Product Overview
These Shootingstar Refill Glue Cards are designed for use with Dynatrap DT3007 and DT3007W Indoor Plug-in Fly Traps. They provide an effective, non-toxic solution for trapping various indoor flying insects.
- Compatibility: Specifically designed for Dynatrap DT3007 and DT3007W indoor insect traps.
- Longevity: Each replacement card can be used for up to 2 weeks, depending on insect activity. This pack contains 20 sticky glue boards.
- Effectiveness: The super sticky surface efficiently traps mosquitoes, fruit flies, gnats, and other small flying insects.
- Safety: The glue cards are non-toxic and odorless, making them suitable for use in homes with children and pets.
Image: A child and a dog in a home setting, illustrating the non-toxic and odorless qualities of the glue cards, ensuring safety for all household members.
Setup and Installation
Follow these steps to install the refill glue card into your Dynatrap DT3007 or DT3007W Indoor Plug-in Fly Trap:
- Prepare the Trap: Ensure your Dynatrap device is unplugged from the electrical outlet before handling.
- Remove Old Card (if applicable): Gently pull out the used glue card from the slot in the Dynatrap device. Dispose of the used card responsibly.
- Prepare New Card: Take a new refill glue card from the pack. Carefully peel off the protective plastic cover from the sticky side of the card. Avoid touching the adhesive surface.
- Insert New Card: Slide the new glue card into the designated slot on the Dynatrap device. Ensure the sticky side faces the light source within the trap. The card should fit snugly.
- Plug In Device: Once the new glue card is securely in place, plug the Dynatrap device into a standard indoor electrical outlet. The blue light will illuminate, indicating it is operational.
Image: Visual guide demonstrating the three simple steps to replace a glue card: peeling the cover, inserting into the trap, and disposing of the old card.
Video: Official product video demonstrating the ease of inserting a refill glue card into the Dynatrap DT3007 Indoor Plug-in Fly Trap and its operation.
Operating Instructions
The Dynatrap DT3007/DT3007W, when equipped with a Shootingstar Refill Glue Card, operates continuously to attract and trap flying insects.
- Automatic Operation: The device is designed for continuous operation. Once plugged in, the blue UV light will emit, attracting insects.
- Insect Attraction: The blue light acts as an attractant for various flying insects, drawing them towards the device.
- Trapping Mechanism: Insects attracted to the light will come into contact with the super sticky glue card, becoming permanently trapped.
- Placement: For optimal results, place the trap in areas where flying insects are commonly observed, such as kitchens, living rooms, bedrooms, or near entry points.
Image: Illustration of various insects including moths, mosquitoes, flies, and fruit flies, highlighting the trap's effectiveness against these pests.
Image: Examples of ideal indoor locations for the Dynatrap, such as kitchens, bedrooms, living rooms, and balconies, to maximize insect trapping.
Maintenance
Regular maintenance ensures the continued effectiveness of your Dynatrap device with Shootingstar Refill Glue Cards.
- Card Replacement: Replace the glue card when it is visibly full of trapped insects or after a maximum of 2 weeks of use, whichever comes first. High insect activity may require more frequent replacement.
- Cleaning: Periodically wipe the exterior of the Dynatrap device with a dry cloth to remove any dust or debris. Ensure the device is unplugged before cleaning.
- Storage: Store unused refill glue cards in a cool, dry place away from direct sunlight to maintain their adhesive quality.
Specifications
| Product Dimensions | 4.7 x 0.7 x 4.7 inches |
| Item Weight | 6.7 ounces (0.19 Kilograms) |
| Manufacturer | Shootingstar |
| Model Number | 20Pack |
| Brand | Shootingstar |
| Color | White |
| Unit Count | 20.0 Count |
Troubleshooting
If you encounter issues with your Dynatrap device or the refill glue cards, consider the following:
- Not Catching Bugs:
- Ensure the device is plugged in and the blue light is on.
- Check if the glue card is new and the protective cover has been removed.
- Relocate the trap to an area with higher insect activity.
- Verify that the sticky side of the card is facing the light.
- Card Not Sticky:
- Ensure the protective plastic cover has been fully removed.
- Replace the card if it has been in use for more than 2 weeks or is covered with dust/debris.
- Device Not Lighting Up:
- Check the electrical outlet to ensure it is functioning correctly.
- Ensure the device is fully inserted into the outlet.
Warranty and Support
For any questions or concerns regarding your Shootingstar Refill Glue Cards, please contact the manufacturer directly. We are committed to providing a satisfying solution for our customers.
Note: This is not an OEM product. Any use of the brand name or model designation for this product is made solely for purposes of demonstrating compatibility.