1. Introduction
Thank you for choosing the weselon Carving 3-Drawer Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image 1.1: The weselon Carving 3-Drawer Dresser, featuring its distinctive carved drawer fronts and gray-blue finish.
2. Safety Information
- Always assemble the dresser on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not allow children to climb on or play with the dresser.
- To prevent tipping, always use the provided anti-tipping device to secure the dresser to a wall.
- Do not exceed the maximum weight capacity for the tabletop (50 lbs) or individual drawers (20 lbs). The overall load capacity is 120 lbs.
Image 2.1: Visual representation of the anti-tipping device, the intricate relief design on the drawers, and the organized interior of the drawers.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Dresser panels (top, bottom, sides, back)
- Drawer components (fronts, sides, backs, bottoms)
- Wooden legs
- Drawer slides and push-to-open mechanisms
- Assembly hardware (screws, dowels, cam locks, etc.)
- Anti-tipping device
- Instruction manual
4. Assembly Instructions
Assembly is required for this product. All necessary hardware and tools (if applicable) are included. Follow the step-by-step diagrams and instructions provided in the separate assembly guide included in your package. It is recommended to have two people for assembly.
- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to the dresser components.
- Identify Parts: Lay out all parts and hardware. Match them with the part numbers in the assembly guide.
- Assemble the Frame: Begin by assembling the main frame of the dresser according to the guide.
- Install Drawer Slides: Attach the drawer slides to the dresser frame and drawer sides as instructed. Ensure they are level and aligned for smooth operation.
- Assemble Drawers: Construct the three drawers, attaching the carved fronts last.
- Insert Drawers: Carefully insert the assembled drawers into the dresser frame.
- Attach Legs: Securely fasten the wooden legs to the bottom of the dresser.
- Install Anti-Tipping Device: For safety, attach the anti-tipping device to the back of the dresser and secure it to a wall stud.
If you encounter any difficulties or have questions during assembly, please refer to the contact information in the Warranty and Support section.
5. Operation
The weselon Carving 3-Drawer Dresser features three spacious drawers designed for easy access and ample storage.
- Drawer Mechanism: The drawers operate with a smooth slide mechanism. To open, gently push the drawer front inward, and the push-to-open mechanism will release it. To close, push the drawer firmly until it clicks into place.
- Storage Capacity: Each drawer is designed to hold up to 20 lbs. The overall unit can support up to 120 lbs. Distribute weight evenly to maintain stability.
Video 5.1: Demonstration of the dresser's features, including the carved design, smooth drawer operation, push-to-open mechanism, and water-resistant surface.
Image 5.1: The dresser with its three drawers partially open, illustrating the ample storage space for various items.
Image 5.2: A close-up view of the push-to-open mechanism located inside the drawer, allowing for handle-free operation.
6. Care and Maintenance
Proper care will ensure the longevity and appearance of your dresser.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Promptly wipe up any spills to prevent staining or water damage.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading.
- Heat: Do not place hot items directly on the surface without protection.
7. Troubleshooting
If you encounter any issues with your dresser, please refer to the following common solutions:
- Drawers not closing smoothly: Check if the drawer slides are properly aligned and free of obstructions. Ensure all screws on the slides are tightened.
- Dresser feels wobbly: Verify that all assembly hardware is securely tightened. Ensure the dresser is placed on a level surface. Re-check the anti-tipping device installation.
- Push-to-open mechanism not working: Ensure the mechanism is correctly installed and aligned with the drawer. A gentle but firm push is required to activate it.
Video 7.1: Close-up demonstration of the push-to-open drawer mechanism and the tactile feel of the carved surface.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | weselon |
| Model | B0DFWBZP9Q |
| Product Dimensions (D x W x H) | 13.77"D x 27.55"W x 30.7"H |
| Color | Gray Blue |
| Room Type | Bedroom, Hallway, Living Room, Entryway, Office |
| Material | High-quality MDF wood (whole unit), Wood (legs) |
| Item Weight | 46 Pounds |
| Assembly Required | Yes |
| Tabletop Load Capacity | 50 lbs |
| Per Drawer Load Capacity | 20 lbs |
| Overall Load Capacity | 120 lbs |
Image 8.1: Detailed diagram showing the product dimensions and various load capacities for the dresser and its drawers.
9. Warranty and Support
This weselon dresser comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or contact weselon customer service.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact weselon customer support through the retailer where the product was purchased. Please have your model number (B0DFWBZP9Q) and purchase date ready.
