GOOLOO AP150 Portable Tire Inflator and Air Compressor User Manual

Introduction

Thank you for choosing the GOOLOO AP150 Portable Tire Inflator. This device is designed for convenient and efficient inflation of various tires and inflatables, featuring a powerful 150 PSI output, cordless operation, and intelligent auto-shutoff. Please read this manual thoroughly before use to ensure safe and optimal performance.

Safety Instructions

• Keep out of reach of children.
• Do not operate in wet conditions or submerge in water.
• Avoid dropping the device.
• Do not expose to extreme temperatures or direct sunlight.
• Ensure proper ventilation during use to prevent overheating.
• Always check the recommended pressure for your item before inflating.
• Disconnect the device from the item once inflation is complete.
• Store in a cool, dry place.

Package Contents

Verify that all items are present in the package:

• 1 x GOOLOO AP150 Portable Air Compressor
• 1 x Air Hose
• 1 x USB-A to USB-C Charging Cable
• 1 x Long Tapered Nozzle
• 1 x Short Tapered Nozzle
• 1 x Presta Valve Adapter
• 1 x British Valve Adapter
• 1 x Ball Needle Adapter
• 1 x Storage Bag
• 1 x User Manual

Setup

Charging the Device

1. Connect the USB-C end of the charging cable to the input port on the AP150.
2. Connect the USB-A end to a compatible USB power adapter (not included).
3. The battery indicator on the LED screen will show charging progress. A full charge provides up to 45 minutes of continuous inflation.

Attaching the Air Hose and Nozzle

1. Screw the air hose securely into the inflation port on the top of the AP150.
2. Select the appropriate nozzle for the item you wish to inflate.
3. Attach the selected nozzle to the other end of the air hose.

Operating Instructions

Powering On and Mode Selection

1. Press and hold the power button (ⓘ) for 3 seconds to turn on the device.
2. Press the mode button (○) to cycle through the 5 inflation modes: Car, Motorcycle, Bicycle, Ball, and Custom. Each mode has a preset pressure value.
3. Use the '+' and '-' buttons to adjust the preset pressure value in any mode, or to set a custom pressure in Custom mode.

Inflation Process

1. Connect the appropriate nozzle to the item's valve.
2. The digital display will show the real-time pressure of the item.
3. Once the desired pressure is set, press the power button (ⓘ) to begin inflation.
4. The AP150 will automatically stop when the preset pressure is reached.
5. Disconnect the hose from the item and the device.

Using the LED Light

• Press the light button (💡) once for continuous illumination.
• Press again for flashing mode.
• Press a third time for SOS mode.
• Press a fourth time to turn off the light.

Power Bank Function

The AP150 can also serve as a power bank to charge your phone or other digital devices:

1. Connect your device's charging cable to the USB-A output port on the AP150.
2. The AP150 will automatically begin charging your device.

Maintenance

• Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasives.
• Store the AP150 and its accessories in the provided storage bag when not in use.
• Recharge the device every 3-6 months if not used regularly to maintain battery health.
• Inspect the air hose and nozzles for any damage before each use.

Troubleshooting

Specifications

• Model: AP150
• Maximum Operating Pressure: 150 PSI
• Air Flow Capacity: 35 Liters Per Minute
• Battery Capacity: 6000mAh (Built-in rechargeable battery)
• Voltage: 12 Volts (DC)
• Item Weight: 1.21 Pounds
• Operating Temperature: -4°F to 140°F (-20°C to 60°C)
• Charging Port: USB-C
• Output Port: USB-A (for power bank function)
• Display: Large LED Digital Display with PSI, KPA, BAR units
• Lighting Modes: Continuous, Flashing, SOS

Warranty & Support

The GOOLOO AP150 Portable Tire Inflator comes with an 18-month warranty from the date of purchase. For technical support, warranty claims, or any product-related inquiries, please contact GOOLOO customer service:

• Website: www.gooloo.com
• Email: support@gooloo.com
• Phone: 1-888-888-1805 (Mon-Fri, PST 9:00a.m.-6:00p.m.)

Please have your model number (AP150) and purchase details ready when contacting support.

Official Product Videos