Introduction
Thank you for choosing the Redragon H878 3-Mode Wireless Gaming Headset. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your headset to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
The Redragon H878 offers versatile connectivity with USB-C wired, Bluetooth 3.0/5.0, and 2.4GHz wireless modes, providing freedom and flexibility for various gaming and audio needs. Featuring immersive 7.1 surround sound and 40mm audio drivers, it delivers crisp highs and deep lows for an enhanced audio experience. Designed for comfort, the headset is lightweight at only 200g (7.05 oz) and includes soft memory foam padding and breathable earcups for extended use. Its 600mAh battery ensures long hours of playtime, and the detachable noise-cancellation microphone provides clear communication.
Package Contents
- Redragon H878 3-Mode Wireless Gaming Headset
- Detachable Microphone
- USB-C Charging Cable
- 2.4GHz Wireless USB Dongle
- User Manual (this document)
Product Overview
Familiarize yourself with the components and controls of your Redragon H878 headset.
Image: Redragon H878 3-Mode Wireless Gaming Headset, showing the headset, detachable microphone, and 2.4GHz USB dongle.
Image: Detailed diagram highlighting the controls on the Redragon H878 headset, including Power ON/OFF, Volume +/-, Mute Mic, Washable Fabric Cover, and Detachable Mic port.
Headset Controls and Indicators:
- Power ON/OFF Button: Located on the left earcup. Press and hold to power on or off.
- Volume Control Wheel: Adjusts audio volume.
- Microphone Mute Button: Toggles microphone mute on/off.
- USB-C Port: For charging and wired connection.
- Microphone Jack: For connecting the detachable microphone.
- LED Indicator: Displays connection status and battery level.
Setup
1. Initial Charging
Before first use, fully charge the headset. Connect the USB-C charging cable to the headset's USB-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status and turn off when fully charged.
Estimated charging time: Approximately 2-3 hours for a full charge.
2. Attaching the Microphone
Insert the detachable microphone into the microphone jack located on the left earcup until it clicks into place. Ensure it is firmly connected for clear audio transmission.
3. Connection Modes
The Redragon H878 supports three connection modes:
Image: Diagram illustrating the three connection modes of the Redragon H878 headset: Bluetooth, 2.4GHz wireless, and wired via USB-C.
3.1. 2.4GHz Wireless Connection (Recommended for Gaming)
- Plug the 2.4GHz USB dongle into an available USB port on your PC, PS5/4/3, or Nintendo Switch dock.
- Power on the headset by pressing and holding the Power ON/OFF button.
- The headset will automatically attempt to connect to the dongle. The LED indicator will show a solid blue light when connected.
- On your device, ensure the Redragon H878 is selected as the audio output and input device.
3.2. Bluetooth Connection
- Power on the headset.
- Press the Mode button (if available, or refer to specific button for Bluetooth pairing) to switch to Bluetooth mode, or if it's the default, proceed. The LED indicator will flash blue, indicating pairing mode.
- On your mobile device, PC, or other Bluetooth-enabled device, go to Bluetooth settings and search for "Redragon H878".
- Select "Redragon H878" to pair. The LED indicator will turn solid blue once connected.
3.3. Wired Connection (USB-C)
- Connect the USB-C cable from the headset's USB-C port directly to a USB port on your PC or compatible device.
- The headset will function as a wired audio device. No battery power is consumed in this mode.
- Ensure the Redragon H878 is selected as the audio output and input device in your system settings.
Operating Instructions
Power On/Off
- To power on: Press and hold the Power ON/OFF button for 3 seconds.
- To power off: Press and hold the Power ON/OFF button for 3 seconds.
Volume Adjustment
- Rotate the volume control wheel up to increase volume.
- Rotate the volume control wheel down to decrease volume.
Microphone Usage
- To mute/unmute the microphone: Press the Microphone Mute button. The LED indicator on the microphone or headset will change to indicate mute status.
- For optimal voice clarity, position the microphone approximately 1-2 inches from your mouth. The noise-cancellation feature helps reduce background noise.
7.1 Surround Sound
The Redragon H878 features 7.1 virtual surround sound for an immersive audio experience. This feature is typically enabled automatically when connected via 2.4GHz wireless or USB-C wired mode on compatible systems (e.g., Windows PC). For some systems, you may need to enable 7.1 surround sound in your device's audio settings or through Redragon's dedicated software (if available).
Image: Diagram illustrating the 7.1 channel surround sound capability of the Redragon H878 headset, highlighting the 40mm sound units.
Battery Life and Charging
The headset is equipped with a 600mAh battery, providing extended usage time. When the battery is low, the LED indicator will flash. Connect the headset to a power source using the USB-C cable to recharge.
Image: Comparison showing the Redragon H878 with its 600mAh battery capacity, indicating upgraded comfort and playtime.
Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the headset. For earcups, gently wipe with a damp cloth and allow to air dry completely before use. Do not use harsh chemicals or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the headset frequently. Charge it regularly, even if not in use for extended periods.
- Detachable Microphone: When not in use, you can detach the microphone to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from headset. | Headset not powered on; incorrect audio output selected; low battery; connection issue. | Ensure headset is powered on. Check device's audio settings to confirm Redragon H878 is selected. Charge the headset. Re-establish connection (re-pair Bluetooth, re-plug dongle/cable). |
| Microphone not working. | Microphone muted; not properly attached; incorrect audio input selected; software issue. | Press the microphone mute button to unmute. Ensure microphone is fully inserted. Check device's audio input settings. Restart application or device. |
| Intermittent connection or audio drops. | Interference; out of range; low battery. | Move closer to the connected device. Ensure no strong wireless interference sources nearby. Charge the headset. |
| Headset not pairing via Bluetooth. | Headset not in pairing mode; device's Bluetooth off; too many paired devices. | Ensure headset is in Bluetooth pairing mode (flashing LED). Turn device's Bluetooth off and on again. Remove old Bluetooth connections from your device. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | SKULD PRO (H878) |
| Connectivity Technology | BT (Bluetooth 3.0/5.0), 2.4GHz Wireless, USB-C Wired |
| Audio Drivers | 40mm Dynamic Drivers |
| Surround Sound | 7.1 Virtual Surround Sound |
| Microphone | Detachable, Noise-Cancellation |
| Battery Capacity | 600mAh Lithium Polymer (included) |
| Weight | Approx. 200g (7.05 oz) |
| Compatible Devices | PC, PS5/4/3, Nintendo Switch, Mobile Devices, Gaming Consoles |
| Ear Placement | Over Ear |
| Impedance | 16 Ohm |
| Noise Control | Sound Isolation |
Warranty and Support
Redragon products come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Redragon website. Keep your purchase receipt as proof of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact Redragon customer service through their official website or the contact information provided on the product packaging.
Official Redragon Website: www.redragonusa.com
